Hello Christian, As you're basically using bridge overlay setup, then perhaps default ARP suppression kicks in. You may try configuring crb-prixy-mac and check if that helps. See: https://www.juniper.net/documentation/us/en/software/junos/cli-reference/topics/ref/statement/crb-proxy-mac.html
Regards, Wojciech sob., 2 sie 2025, 03:06 użytkownik Cristian Cardoso < [email protected]> napisał: > Hi everyone! > > I'm starting to study how to interconnect two data centers via > EVPN-VXLAN, where DC1 runs AS65100 and DC2 runs AS65200. I configured > a DCI connection between one of DC1's leafs and one of DC2's leafs. I > set up an eBGP session and started propagating routes to inject these > learned routes into the border leaf. I created an advertisement policy > for the spine of both data centers using next-hop-self and extended > community tagging. I see the routes being propagated correctly, and I > receive the MAC addresses in the Ethernet table on both sides, but I > can't ping machines from one DC to the other. > > Could anyone tell me if it is necessary to create some type of > route-instance or something like that, in my scenario I do not use > anycast gateway or irb interface, just propagation of the L2 VLAN > within the VXLAN, I searched the Juniper website but I did not find > clear documentation informing how to proceed to do this type of > scenario, by chance has anyone already gone through this type of > configuration and was successful? > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp >
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
