I am running Ubuntu 16.04 server on an ec2 instance. Jupyterhub is installed and running properly before applying the following changes:
1. Jupyterhub is started at boot as a system service following these instructions - https://github.com/jupyterhub/jupyterhub/wiki/Run-jupyterhub-as-a-system-service 2. Google OAuthentication configuration applied following these instructions - https://github.com/jupyterhub/oauthenticator Before making changes to /etc/jupyterhub/jupyterhub_config.py for oauthentication, system service starts, ports are assigned and everything works correctly. After making changes for oauthentication, the google authentication works properly. Jupyterhub system service doesn't throw any errors, but when I run netstat -plnt, ports 8081 and 443 are not shown. If I then start jupyterhub manually (with the same config file), no errors are thrown and the ports become active. If I comment out the oauthentication lines and reboot, everything works properly again. I hope this is clear. Any help would be appreciated because I'm stumped! Thanks in advance, Andy -- You received this message because you are subscribed to the Google Groups "Project Jupyter" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jupyter/8b7903dc-3373-4937-85b9-59edbd6060e5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
