| Hi Pash,
obviously you're not binding for some reason. The error you are receiving is from the server (which server is it by the way?). I'd suggest you try to simplify things; set your server to accept anonymous connections and get JX working with that, and then add authentication later. You could also try without any base DN, or with a shorter base DN.
The fact that you are getting an error message back from the server means that you have the host and port correct, which is good :-). Keep using Ldap v3, but try a shorter base DN, or none at all, and see if that helps.
- Chris
On 14/12/2005, at 9:18 AM, Pash wrote:
Hi Chris,
This is Pash. In one of the JBoss forum its CTO suggested me to try JXplorer. Earlier I used to use ADAM ADSI Edit.
I have downloaded it but facing some issues in connecting to my ldap server.
Here are the details that I have provided in connection window..
Host :- 100.100.100.100
Port:- 389
Protocol : LDAP V3 (Tried will all available in dropdon list)
Base DSN:- OU=A,OU=B,OU=C Port,DC=comp,DC=xyz,DC=com
Imp:- there is space in OU= C and Port as your document says there should not be any space. I tried with both but didn't get through.
Security:- tried with both Anonymous as well as with user credentials
When I try to connect, it gives follwoing error
javax.naming.NamingException: [LDAP: error code 1 - 00000000: LdapErr: DSID-0C090627, comment: In order to perform this operation a successful bind must be completed on the connection., data 0, vece]
I am really missing to use this wonderful tool due to this error.
If you could help me that would be great.
regards,
Pash Prashant N Pitale
Project Leader
Phone: +91-40-2360-0861 (ext-213)
Email: [EMAIL PROTECTED]
Home page: www.valuelabs.com
Recipient “Best Indian SME 2003”
ValueLabs
Where Value & Innovation Co-exist
![]()
|
