Igor:
Heya. Here are the log files from the Win98 machine
that hangs up.-Scott On Thu, 14 Nov 2002, Igor Kotelevsky wrote: > Hello Scott. > The thing that you said seems to me like the application hangs up. > Your log file also reasserts that: > - There is one string only, which show result of reading > Master Node status from the registry. > - There absent next string, which indicate setting of the timer for > beginning > determination of Master Node status. > Please update CVS (I added some output into logs), repeat your Win98 test > and send me both log files: > - NidLog.txt, > - MasterNode.txt. > > - Igor > > ----- Original Message ----- > From: "Scott C. Best" <[EMAIL PROTECTED]> > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > Cc: <[EMAIL PROTECTED]> > Sent: Thursday, November 14, 2002 10:05 AM > Subject: Re: Master Node bugs > > > > Igor: > > Heya. Log file attached for the Win98 startup. The Win98 > > PC also has the following problems when I start up Kaboodle without > > a LAN connection or modem connection: > > > > 1. When Kaboodle starts up, the "Detecting Network" MessageBox > > never goes away. > > > > 2. After the log file is generated and I quit, when I try to > > install the RegistrationFile, I get the warning "This PC IS > > Not the Kaboodle Master Node". > > > > I'll re-run it attached to the LAN to see what the > > MasterNode.txt file produces. > > > > thanks, > > Scott > > > > On Wed, 13 Nov 2002, Igor Kotelevsky wrote: > > > > > Hello Scott. > > > Sorry I don't see these bugs. > > > I implemented additional log-file *MasterNode.txt* > > > as I wrote in my previous e-mail. > > > That file contains information about processing changing Master Node > status > > > and about GUI part of that changing. > > > Please repeat bugs and send me log-files for each bug severally. > > > Also I wait the log-file for the bug from your previous e-mail: > > > > 2. When I start Kaboodle on a Win98 laptop with just a modem > > > > and no network connection, it fails to set itself as the > > > > Master. > > > > > > - Igor > > > > > > ----- Original Message ----- > > > From: "Scott C. Best" <[EMAIL PROTECTED]> > > > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > > > Cc: <[EMAIL PROTECTED]> > > > Sent: Tuesday, November 12, 2002 11:40 PM > > > Subject: Re: [Kaboodle-devel] Re: VPN bug > > > > > > > > > > Igor: > > > > Heya. Sorry forgot to mention these other two Master > > > > Node bugs, which maybe are all part of the same bug: > > > > > > > > 3. When I start Kaboodle on PC1 on my LAN, it sets itself as > > > > the Master like it should. Then I start PC2 on my LAN. If > > > > I look in the Network Icon on PC1, it says that the Master > > > > node is PC2. If I look in the Network icon on PC2, it says > > > > that the Master Node is PC1. > > > > > > > > 4. If I open the PropPanel for PC1, it says that "This PC is > > > > the Master Node". But the checkbox is active. Same thing > > > > for PC2: "This PC is the Master Node" which an active > > > > checkbox. The checkbox should only be active if the PC is > > > > *not* currently the Master Node. > > > > > > > > Thanks! > > > > > > > > -Scott > > > > > > > > On Tue, 12 Nov 2002, Scott C. Best wrote: > > > > > > > > > Igor: > > > > > Thanks for the update. Am testing it out now. Regarding > > > > > #1 thru #5, how long would you estimate it would take you to > > > > > clean up the code and document the functionality? > > > > > > > > > > Before that work, though, I'm hoping we can fix the > > > > > Master Node functionality. Two known bugs: > > > > > > > > > > 1. All Kaboodle nodes ping the list of active devices. Only > > > > > the Master Node should do this. Everyone else should just > > > > > sniff. If I change the Master Node, the new Master should > > > > > start pinging. > > > > > > > > > > 2. When I start Kaboodle on a Win98 laptop with just a modem > > > > > and no network connection, it fails to set itself as the > > > > > Master. At least, when I install the RegistrationFile, > > > > > GetEngaged.exe warns me that "This PC is not the Master". > > > > > > > > > > thanks, > > > > > Scott > > > > > > > > > > On Tue, 12 Nov 2002, Igor Kotelevsky wrote: > > > > > > > > > > > Hello Scott. > > > > > > Your thing implemented: > > > > > > Kaboodle saves the IP address after successful remote connection > > > > > > in the registry. When it next try to connect with that partner, > > > > > > it try that IP address *first*, on port 4182, > > > > > > bypassing a Gnutella completely. > > > > > > If it fails to connect, then it returns back to the Gnutella > search. > > > > > > All my changes are in the CVS server. > > > > > > > > > > > > Also I want to notice following my estimation: > > > > > > 1. Current design of source code not very well to answer the > purpose > > > > > > of the current functionality of the application. > > > > > > There are very many big functions, which has fuzzy functionality. > > > > > > 2. Source code has very little documentation. > > > > > > 3. There is a big part of code, which was written in style C > language, > > > > > > but not in style C++ language. > > > > > > 4. Indications of many variables look as in "hungarian notation", > > > > > > but these real types not conform to that notation. > > > > > > 5. Indications of some variables written in MFC style, > > > > > > others variables don't has that style, > > > > > > even when both of them refer to one class. > > > > > > Things #1 - #5 greatly obstruct further accompaniment and > development > > > > > > of the application. > > > > > > > > > > > > - Igor > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: "Scott C. Best" <[EMAIL PROTECTED]> > > > > > > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > > > > > > Cc: <[EMAIL PROTECTED]> > > > > > > Sent: Monday, November 11, 2002 10:35 PM > > > > > > Subject: Re: [Kaboodle-devel] Re: VPN bug > > > > > > > > > > > > > > > > > > > Igor: > > > > > > > Sorry, didn't see this email until after I sent my > > > > > > > email describing the LAN traffic. Am looking forward to you > > > > > > > getting to work on this tomorrrow. > > > > > > > > > > > > > > -Scott > > > > > > > > > > > > > > On Mon, 11 Nov 2002, Igor Kotelevsky wrote: > > > > > > > > > > > > > > > Hello Scott. > > > > > > > > > > > > > > > > First. > > > > > > > > The bug you wrote fixed: > > > > > > > > > > Looking at my LAN traffic after I hit the "Connect" > > > > > > > > > > button, I'm not sure that the discovery is working. I > don't > > > > > > > > > > see any traffic exchanged between the two endpoints. > > > > > > > > > > > > > > > > Second. > > > > > > > > Now Kaboodle saves the IP address of the latest successful > remote > > > > > > connection > > > > > > > > in the registry. > > > > > > > > Please see the registry key > > > > > > > > *SOFTWARE\Kaboodle\LatestRemoteConnections*. > > > > > > > > It didn't tries that IP addresses *first*, on port 4182, > > > > > > > > bypassing Gnutella completely. > > > > > > > > I'll implement that later on (I hope this will tomorrow). > > > > > > > > > > > > > > > > - Igor > > > > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > > From: "Scott C. Best" <[EMAIL PROTECTED]> > > > > > > > > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > > > > > > > > Cc: <[EMAIL PROTECTED]> > > > > > > > > Sent: Monday, November 11, 2002 10:11 AM > > > > > > > > Subject: Re: [Kaboodle-devel] Re: VPN bug > > > > > > > > > > > > > > > > > > > > > > > > > Igor: > > > > > > > > > Heya. Hope you had a good weekend. Quick questions: > > > > > > > > > > > > > > > > > > 1. Any progress on the update to Kaboodle to use Partner IP > > > > > > > > > addresses as described below? > > > > > > > > > > > > > > > > > > 2. Any progress on the Master Node ping problem? > > > > > > > > > > > > > > > > > > thanks, > > > > > > > > > Scott > > > > > > > > > > > > > > > > > > On Wed, 6 Nov 2002, Scott C. Best wrote: > > > > > > > > > > > > > > > > > > > Igor: > > > > > > > > > > Looking at my LAN traffic after I hit the "Connect" > > > > > > > > > > button, I'm not sure that the discovery is working. I > don't > > > > > > > > > > see any traffic exchanged between the two endpoints. What > I > > > > > > > > > > *do* see is the request to Gnutella.GetEngaged.Net, and > then > > > > > > > > > > multiple requests to the IP address in the Partnership > file. > > > > > > > > > > Then, in my VPN status window, that IP address is now > shown > > > > > > > > > > as a Gnutella server with a "Handshake OK" status. > > > > > > > > > > > > > > > > > > > > Here's what I think: every time I successfully make > > > > > > > > > > a connection to a VPN partner, I should put their IP > address > > > > > > > > > > into a file, or registry entry. When I next try to connect > > > > > > > > > > with them, I should try those IP addresses *first*, on > port > > > > > > > > > > 4182, bypassing Gnutella completely. If they fail to > connect, > > > > > > > > > > I should fall back to a Gnutella search. > > > > > > > > > > > > > > > > > > > > Of course, the first time I connect with a Partner, > > > > > > > > > > I won't have such a file or registry entry. In that case, > I > > > > > > > > > > should use the IP address in the Partnership file first. > If > > > > > > > > > > that fails, then fallback to Gnutella. > > > > > > > > > > > > > > > > > > > > Importantly: those IP address I try should *not* end > > > > > > > > > > up in the list of Gnutella servers. I should not see any > > > traffic > > > > > > > > > > to port 4183 except to machines in the list of Gnutella > > > servers. > > > > > > > > > > > > > > > > > > > > hope this helps, > > > > > > > > > > > > > > > > > > > > Scott > > > > > > > > > > > > > > > > > > > > On Wed, 6 Nov 2002, Igor Kotelevsky wrote: > > > > > > > > > > > > > > > > > > > > > Hello Scott. > > > > > > > > > > > I continue VPN bug debugging process. > > > > > > > > > > > I know that Kaboodle receives remote network data, > > > > > > > > > > > which is *exactly* correct, but GUI 'don't want' to show > > > that > > > > > > data. > > > > > > > > > > > - Igor > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > > > > > > This sf.net email is sponsored by: See the NEW Palm > > > > > > > > > > Tungsten T handheld. Power & Color in a compact size! > > > > > > > > > > http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0001en > > > > > > > > > > _______________________________________________ > > > > > > > > > > Kaboodle-devel mailing list > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/kaboodle-devel > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > > This sf.net email is sponsored by:ThinkGeek > > > > > > Welcome to geek heaven. > > > > > > http://thinkgeek.com/sf > > > > > > _______________________________________________ > > > > > > Kaboodle-devel mailing list > > > > > > [EMAIL PROTECTED] > > > > > > https://lists.sourceforge.net/lists/listinfo/kaboodle-devel > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > This sf.net email is sponsored by: > > > > > To learn the basics of securing your web site with SSL, > > > > > click here to get a FREE TRIAL of a Thawte Server Certificate: > > > > > http://www.gothawte.com/rd522.html > > > > > _______________________________________________ > > > > > Kaboodle-devel mailing list > > > > > [EMAIL PROTECTED] > > > > > https://lists.sourceforge.net/lists/listinfo/kaboodle-devel > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
Win98logs.zip
Description: Zip archive
