------------------------------------------------------------ revno: 989 committer: John Frankland <[email protected]> branch nick: 1.9 timestamp: Thu 2014-02-20 11:22:12 +0100 message: * set default distance of FAZIA telescopes to 80cm * adds KVFAZIAIDSi1PSA identification telescopes to permit Z-identification of particles stopping in first member of FAZIA telescopes * in KVGeoImport: - set 'Type' of detectors deduced from geometry, it is the name of the KVMaterial which composes the active layer of the detector - check for 'geometry inconsistency' i.e. when detectors from pre-existing groups get mixed up (case of INDRA ring 6 and FAZIA telescopes in KVINDRAFAZIA with distance=80cm): in this case we do not add detectors from different groups to the 'Node' lists of detectors in front and behind of a detector, thus avoiding creating spurious ID telescopes such as 'ID_CSI_0601_SI1-T1-Q1-B001'. This may not be a good solution for ALL geometries... added: FAZIA/idtelescopes/ FAZIA/idtelescopes/FAZIAidtelescopesLinkDef.h FAZIA/idtelescopes/KVFAZIAIDSi1PSA.cpp FAZIA/idtelescopes/KVFAZIAIDSi1PSA.h FAZIA/idtelescopes/KVFAZIAIDTelescope.cpp FAZIA/idtelescopes/KVFAZIAIDTelescope.h modified: FAZIA/Makefile FAZIA/fazia/KVINDRAFAZIA.cpp FAZIA/fazia/KVINDRAFAZIA.h KVMultiDet/geometry/KVGeoImport.cpp etc/kaliveda-fazia.rootrc etc/kaliveda-indra.rootrc
-- lp:kaliveda https://code.launchpad.net/~kaliveda-dev/kaliveda/1.9 Your team KaliVeda Development Team is subscribed to branch lp:kaliveda. To unsubscribe from this branch go to https://code.launchpad.net/~kaliveda-dev/kaliveda/1.9/+edit-subscription _______________________________________________ Mailing list: https://launchpad.net/~kaliveda-dev Post to : [email protected] Unsubscribe : https://launchpad.net/~kaliveda-dev More help : https://help.launchpad.net/ListHelp
