On 04/24/2015 03:04 PM, Nochum Sossonko wrote:
Hi,
We are using Kallithea as our SCM in our company (very nice, btw)
installed on a Windows Server 2008 R2. The installation process was
pretty straightforward but I did some things that I could not find in
the online documentation so I figured I’d post my “findings” here in
case it will help anyone else (and for inclusion in the docs, as
appropriate).
Thanks for sharing!
Please consider providing this as a patch to our documentation. We are
all users of the system and if we all contribute we will get all more
than we give ;-) The documentation has a lot of room for improvement -
probably even more on windows where we only have few users.
I assume "run the Kallithea server on startup" means using the small web
server in 'paster serve' to run the WSGI application?
Why did you decide to use IIS as reverse proxy instead of running
Kallithea inside IIS as described on
http://docs.kallithea-scm.org/en/latest/installation_iis.html ?
/Mads
1.After following the normal install steps, I wanted to use IIS as a
reverse-proxy to the Kallithea server. To get this done properly, I
did the following:
a.Install IIS Rewrite Module and Application Request Routing.
i.http://www.iis.net/downloads/microsoft/url-rewrite
ii.http://www.iis.net/downloads/microsoft/application-request-routing
b.Enable proxying at the global, server level (this can be done in the
IIS GUI via “Application Request Routing” icon -> Server Proxy
Settings link on the right-hand side).
c.In that same settings window (very important!!) uncheck “Include TCP
port from client IP” under the “X-Forwarded-For” setting.
d.Under query string support, select “Include query string”.
e.Leave all other settings there as-is.
f.Create a new site and make make a new IIS Rewrite rule via the IIS
Rewrite icon on the site.
g.Select “Reverse Proxy” and fill out the proxy URL as
“127.0.0.1:5000” and check “Enbable SSL Offloading”.
h.After the rule is created, open it and check that the URL is correct
(with the proper port) and check “Append Query String”.
i.Finally, run the following command to fix the clone url: appcmd.exe
set config -section:system.webServer/proxy /preserveHostHeader:"True"
/commit:apphost
i.This is a server-wide setting, there is no way to set this on the
site level.
2.Then, I wanted an ultra-simple way to run the Kallithea server on
startup, so I created a task that runs on startup and uses a batch
file to run the paster command. I won’t paste the event file here, as
it is a very simple thing to do, but I can provide if anyone is
interested.
3.I also made an event to run the paster make-index command to update
the Whoosh full-text search indexes every 2 hours.
4.Finally, I ran into an issue where my server was returning a 500 for
certain code files (eg, .csproj and .cs files) and had to modify the
Request Filtering on the Kallithea site (via the icon of the same
name) -> File Name Extensions to allow these files to be served.
Not much in the way of innovation, but figured I’d share J
Thank you,
Nochum Sossonko,
IT Director
Georgian American Alloys, Inc
_______________________________________________
kallithea-general mailing list
[email protected]
http://lists.sfconservancy.org/mailman/listinfo/kallithea-general
