On Tue, Mar 22, 2022 at 07:03:23PM +0530, Srinivasa Rao Mandadapu wrote:
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 14 struct lpass_macro
> > *lpass_macro_pds_init(struct device *dev)
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 15 {
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 16 struct
> > lpass_macro *l_pds;
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 17 int ret;
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 18
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 19 if
> > (!of_find_property(dev->of_node, "power-domains", NULL))
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 20 return
> > NULL;
> >
> > Returning NULL here will lead to a crash in tx_macro_runtime_resume()
> >
> > When a function returns a mix of NULL and error pointers, then NULL
> > means the feature is deliberately disabled. It's not an error, it's a
> > deliberate choice by the distro or sys admin. The caller has to
> > be written to allow the feature to be disabled.
> >
> > An example of this might be LEDs. Maybe people don't want LEDs so code
> > has to asume that the led->ops pointer might be NULL and check for that
> > before dereferencing it.
>
> Actually, it's optional here. For some targets, with lpass ADSP enabled,
> power domains are not required.
>
> So is the reason, returning NULL Here.
>
Unfortunately, the caller is not written to handle NULLs so it will
crash.
sound/soc/codecs/lpass-tx-macro.c
1913 static int tx_macro_remove(struct platform_device *pdev)
1914 {
1915 struct tx_macro *tx = dev_get_drvdata(&pdev->dev);
1916
1917 clk_disable_unprepare(tx->macro);
1918 clk_disable_unprepare(tx->dcodec);
1919 clk_disable_unprepare(tx->mclk);
1920 clk_disable_unprepare(tx->npl);
1921 clk_disable_unprepare(tx->fsgen);
1922
1923 lpass_macro_pds_exit(tx->pds);
^^^^^^^
Boom.
1924
1925 return 0;
1926 }
> >
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 21
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 22 l_pds =
> > devm_kzalloc(dev, sizeof(*l_pds), GFP_KERNEL);
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 23 if (!l_pds)
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 24 return
> > ERR_PTR(-ENOMEM);
> >
> > Good.
> >
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 25
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 26 l_pds->macro_pd
> > = dev_pm_domain_attach_by_name(dev, "macro");
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 27 if
> > (IS_ERR_OR_NULL(l_pds->macro_pd))
> > 9e3d83c52844f95 Srinivasa Rao Mandadapu 2022-02-26 28 return
> > NULL;
> >
> > If this feature is optional then it should be:
> >
> > if (IS_ERR_OR_NULL(l_pds->macro_pd))
> > return ERR_CAST(l_pds->macro_pd);
> >
> > The admin deliberately chose to enable the feature so we can't just
> > ignore errors and convert them to NULL.
>
> Here it's not optional, if power domains feature is available then macro and
> dcodec power domains should be present.
>
> So will update it like below.
>
> if (IS_ERR_OR_NULL(l_pds->macro_pd)) {
> ret = PTR_ERR(l_pds->macro_pd);
> goto macro_err;
> }
I bet COMPILE_TEST allows this to compile without CONFIG_PM but there
isn't anything we can do about that...
regards,
dan carpenter
_______________________________________________
kbuild mailing list -- [email protected]
To unsubscribe send an email to [email protected]
