I'm trying to use kdb-v1.5-2.2.18. However, I've encountered a mounting problem were my nfs mounts in fstab fail on boot up. ext2 filesystems mount OK on boot up. After boot up, mounts of either nfs or ext2 filesystems hang in the mount(2) function. Also, umount of an ext2 filesystem hangs. The system will not complete either an init to level 0 (halt) or 6 (reboot). (Multiuser remote access and the system console function OK.) I'm also getting three oops displays on boot up (digest follows): Entering kdb (current = 0xc7ac4000, pid 61 [=modprobe]) Panic: Oops due to panic @ 0xc8026054 [= usb_register_Rc1964387] Entering kdb (current = 0xc7920000, pid 295 [=modprobe]) Panic: Oops due to panic @ 0xc0109f39 [= ret_with_reschedule] Entering kdb (current = 0xc6ed0000, pid 574 [=mount]) Panic: Oops due to panic @ 0xc0129ec8 [= read_super+0xb8] The last one is the cause of the NFS mount failure. In the kernel build, I've used the RH 7.0 (2.2.16-22) .config, configured all new 2.2.17 and 2.2.18 to N, configured kdb, kdb=on, and use frame pointers. Has anyone else tried kdb-v1.5-2.2.18? Anyone experience the same problem(s)? Any suggestions concerning the above mentioned mount problems and oops messages? Sincerely, Ken Fuchs <[EMAIL PROTECTED]>
