https://bugs.kde.org/show_bug.cgi?id=431057
John <[email protected]> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |[email protected] --- Comment #12 from John <[email protected]> --- On my Dell Inspiron 5770, with its built-in 2K display the refesh rate is shown as: 60.01 Hz. kscreen-doctor -o shows: Output: 1 eDP-1 1c060aa7-39a3-419d-95c2-12addc2a9006 enabled connected priority 1 Panel replication source:0 Modes: 1:[email protected]*! 2:[email protected] 3:[email protected] 4:[email protected] 5:[email protected] 6:[email protected] 7:[email protected] 8:[email protected] 9:[email protected] 10:[email protected] 11:[email protected] 12:[email protected] 13:[email protected] 14:[email protected] Geometry: 0,0 1600x900 Scale: 1.2 Rotation: 1 Overscan: 0 Vrr: incapable RgbRange: Full HDR: incapable Wide Color Gamut: incapable ICC profile: none Color profile source: sRGB Color power preference: prefer efficiency and performance Brightness control: supported, set to 97% and dimming to 100% Color resolution: automatic (10), range: [6; 12] bits per color Allow EDR: always Sharpness control: unsupported Info Center's EDID page shows: # card0-eDP-1 ####################### Block 0, Base EDID: EDID Structure Version & Revision: 1.4 Vendor & Product Identification: Manufacturer: CMN Model: 5944 Made in: week 43 of 2015 Basic Display Parameters & Features: Digital display Bits per primary color channel: 6 DisplayPort interface Maximum image size: 38 cm x 21 cm Gamma: 2.20 Supported color formats: RGB 4:4:4 First detailed timing includes the native pixel format and preferred refresh rate Color Characteristics: Red : 0.6464, 0.3378 Green: 0.3164, 0.6142 Blue : 0.1572, 0.0439 White: 0.3134, 0.3291 Established Timings I & II: none Standard Timings: none Detailed Timing Descriptors: DTD 1: 1920x1080 60.007852 Hz 16:9 67.929 kHz 152.840000 MHz (381 mm x 214 mm) Hfront 48 Hsync 32 Hback 250 Hpol P Vfront 3 Vsync 5 Vback 44 Vpol N DTD 2: 1920x1080 48.005497 Hz 16:9 54.342 kHz 122.270000 MHz (381 mm x 214 mm) Hfront 48 Hsync 32 Hback 250 Hpol P Vfront 3 Vsync 5 Vback 44 Vpol N Alphanumeric Data String: 'N1YPX�173HCE' Checksum: 0x08 ---------------- EDID conformity: PASS So in my case the rounding to only 2 decimal places is not that good, I mean nice to see. I would rather see just 60 Hz or the full 60.007852 Hz Or just 60 Hz, but with a way to also see the more precise version, other than looking at the EDID. Anyway, I wanted mainly just to report what I'm seeing on my laptop (the GPU is an Intel UHD 620, if that helps). I'm using Debian 14 (Forky, AKA the 'testing' repository), Linux 6.17, Mesa 25.3, Plasma 6.5.4, Frameworks 6.20. -- You are receiving this mail because: You are watching all bug changes.
