https://bugs.kde.org/show_bug.cgi?id=515190
Ángel Navarro <[email protected]> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDSINFO |CONFIRMED Resolution|WAITINGFORINFO |--- --- Comment #2 from Ángel Navarro <[email protected]> --- (In reply to Arjen Hiemstra from comment #1) > Temperature sensors are read from lm-sensors, so you should compare with the > output of the `sensors` command. I have no idea what the "acpi" command uses > as its data source, but it seems to be using something different. ~ » acpi -V Battery 0: Discharging, 75%, 02:35:18 remaining Battery 0: design capacity 4828 mAh, last full capacity 3871 mAh = 80% Adapter 0: off-line Thermal 0: ok, 36.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 103.0 degrees C Thermal 0: trip point 1 switches to mode passive at temperature 101.0 degrees C Cooling 0: Processor 0 of 3 Cooling 1: Processor 0 of 3 Cooling 2: Processor 0 of 3 Cooling 3: Processor 0 of 3 Cooling 4: Processor 0 of 3 Cooling 5: Processor 0 of 3 Cooling 6: Processor 0 of 3 Cooling 7: Processor 0 of 3 Cooling 8: Processor 0 of 3 Cooling 9: Processor 0 of 3 Cooling 10: Processor 0 of 3 Cooling 11: Processor 0 of 3 Cooling 12: Processor 0 of 3 Cooling 13: Processor 0 of 3 Cooling 14: Processor 0 of 3 Cooling 15: Processor 0 of 3 ~ » sensors asus-isa-000a Adapter: ISA adapter cpu_fan: 0 RPM gpu_fan: 0 RPM pwm1: N/A pwm2: N/A amdgpu-pci-6500 Adapter: PCI adapter vddgfx: 745.00 mV vddnb: 760.00 mV edge: +35.0°C PPT: 6.03 W sclk: 400 MHz BAT0-acpi-0 Adapter: ACPI interface in0: 15.75 V power1: 18.16 W mt7921_phy0-pci-0200 Adapter: PCI adapter temp1: +32.0°C zenpower-pci-00c3 Adapter: PCI adapter Tdie: +36.0°C (high = +95.0°C) Tctl: +36.0°C nvme-pci-0400 Adapter: PCI adapter Composite: +27.9°C (low = -273.1°C, high = +80.8°C) (crit = +84.8°C) Sensor 1: +27.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +26.9°C (low = -273.1°C, high = +65261.8°C) acpitz-acpi-0 Adapter: ACPI interface temp1: +36.0°C Both acpi -V and sensors seem to agree that my CPU is at 36°C and not 0. -- You are receiving this mail because: You are watching all bug changes.
