https://bugs.kde.org/show_bug.cgi?id=383606
Bug ID: 383606 Summary: Low power mode settings used regardless of actual charge Product: Powerdevil Version: 5.8.7 Platform: Neon Packages OS: Linux Status: UNCONFIRMED Severity: normal Priority: NOR Component: general Assignee: plasma-de...@kde.org Reporter: syfe...@gmail.com Target Milestone: --- A new Neon installation(9 days) on a Dell Inspiron 7567 Gaming only uses power settings from the "low power" tab of the power manager. The battery has been detected(it shows charge %, health information and even the serial number) but the system doesn't act upon this information. Steps to reproduce: 1. Charge the battery above what you set as the "low power" threshold in System Settings > Power Management > Advanced Settings. Note: I did not change this setting from 5% for critical level and 10% for low power 2. Set different "Dim screen" times in the "On battery" and "On low battery" tabs of Power Management in the System Settings Module. 3. Stop touching the screen and look at a clock until the screen dims. Actual results The time set for low power is used regardless of the charge Expected Results "On battery" time is used Platform information KDE Neon, installed as 20170808, updated on the 15th of August by 'sudo apt update' and installing the update in Discover Additional Information I've not changed ACPI settings from the default(Intel RAID if memory serves) to pure ACPI in the BIOS. '~$ inxi -Fz System: Host: PiDell Kernel: 4.10.0-30-generic x86_64 (64 bit) Desktop: KDE Plasma 5.8.7 Distro: neon 16.04 xenial Machine: System: Dell (portable) product: Inspiron 15 7000 Gaming Mobo: Dell model: 065C71 v: A00 Bios: Dell v: 01.00.05 date: 03/01/2017 CPU: Quad core Intel Core i7-7700HQ (-HT-MCP-) cache: 6144 KB clock speeds: max: 3800 MHz 1: 899 MHz 2: 899 MHz 3: 899 MHz 4: 899 MHz 5: 902 MHz 6: 927 MHz 7: 899 MHz 8: 899 MHz Graphics: Card-1: Intel Device 591b Card-2: NVIDIA Device 1c8c Display Server: X.Org 1.19.3 drivers: (unloaded: fbdev,vesa) Resolution: 1920x1080@60.00hz GLX Renderer: Mesa DRI Intel Kabylake GT2 GLX Version: 3.0 Mesa 17.0.7 Audio: Card Intel Device a171 driver: snd_hda_intel Sound: Advanced Linux Sound Architecture v: k4.10.0-30-generic Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 IF: enp2s0 state: down mac: <filter> Card-2: Intel Wireless 3165 driver: iwlwifi IF: wlp3s0 state: up mac: <filter> Drives: HDD Total Size: 1256.3GB (3.0% used) ID-1: /dev/sda model: Micron_1100_SATA size: 256.1GB ID-2: /dev/sdb model: TOSHIBA_MQ01ABD1 size: 1000.2GB Partition: ID-1: / size: 130G used: 8.7G (8%) fs: ext4 dev: /dev/sda4 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: System Temperatures: cpu: 41.0C mobo: N/A Fan Speeds (in rpm): cpu: N/A Info: Processes: 233 Uptime: 3 days Memory: 2930.4/15911.3MB Client: Shell (bash) inxi: 2.2.35' -- You are receiving this mail because: You are watching all bug changes.