https://bugs.kde.org/show_bug.cgi?id=424010
--- Comment #2 from Michael <k...@callthecomputerdoctor.com> ---
Okay, it looks like the height is fine but the width is just shy of 8.5" even
though an 8.5" sheet can fit on the bed perfectly and scan perfectly...
$ scanimage -d "plustek:libusb:003:003" -A
All options specific to device `plustek:libusb:003:003':
Scan Mode:
--mode Lineart|Gray|Color [Color]
Selects the scan mode (e.g., lineart, monochrome, or color).
--depth 8|16bit [8]
Number of bits per sample, typical values are 1 for "line-art" and 8
for multibit scans.
--source Normal|Transparency|Negative [inactive]
Selects the scan source (such as a document-feeder).
--resolution 50..2400dpi [50]
Sets the resolution of the scanned image.
--preview[=(yes|no)] [no]
Request a preview-quality scan.
Geometry:
-l 0..215mm [0]
Top-left x position of scan area.
-t 0..297mm [0]
Top-left y position of scan area.
-x 0..215mm [103]
Width of scan-area.
-y 0..297mm [76.21]
Height of scan-area.
Enhancement:
--brightness -100..100% (in steps of 1) [0]
Controls the brightness of the acquired image.
--contrast -100..100% (in steps of 1) [0]
Controls the contrast of the acquired image.
--custom-gamma[=(yes|no)] [no]
Determines whether a builtin or a custom gamma-table should be used.
--gamma-table 0..255,... [inactive]
Gamma-correction table. In color mode this option equally affects the
red, green, and blue channels simultaneously (i.e., it is an intensity
gamma table).
--red-gamma-table 0..255,... [inactive]
Gamma-correction table for the red band.
--green-gamma-table 0..255,... [inactive]
Gamma-correction table for the green band.
--blue-gamma-table 0..255,... [inactive]
Gamma-correction table for the blue band.
Device-Settings:
--lamp-switch[=(yes|no)] [no]
Manually switching the lamp(s).
--lampoff-time 0..999 (in steps of 1) [300]
Lampoff-time in seconds.
--lamp-off-at-exit[=(yes|no)] [yes]
Turn off lamp when program exits
--warmup-time -1..999 (in steps of 1) [inactive]
Warmup-time in seconds.
--lamp-off-during-dcal[=(yes|no)] [no]
Always switches lamp off when doing dark calibration.
--calibration-cache[=(yes|no)] [no]
Enables or disables calibration data cache.
--speedup-switch[=(yes|no)] [inactive]
Enables or disables speeding up sensor movement.
--calibrate [inactive]
Performs calibration
Analog frontend:
--red-gain -1..63 (in steps of 1) [-1]
Red gain value of the AFE
--green-gain -1..63 (in steps of 1) [-1]
Green gain value of the AFE
--blue-gain -1..63 (in steps of 1) [-1]
Blue gain value of the AFE
--red-offset -1..63 (in steps of 1) [-1]
Red offset value of the AFE
--green-offset -1..63 (in steps of 1) [-1]
Green offset value of the AFE
--blue-offset -1..63 (in steps of 1) [-1]
Blue offset value of the AFE
--redlamp-off -1..16363 (in steps of 1) [-1]
Defines red lamp off parameter
--greenlamp-off -1..16363 (in steps of 1) [-1]
Defines green lamp off parameter
--bluelamp-off -1..16363 (in steps of 1) [-1]
Defines blue lamp off parameter
Buttons:
--button 0[=(yes|no)] [no] [hardware]
This option reflects the status of the scanner buttons.
--button 1[=(yes|no)] [no] [hardware]
This option reflects the status of the scanner buttons.
--button 2[=(yes|no)] [no] [hardware]
This option reflects the status of the scanner buttons.
--button 3[=(yes|no)] [inactive]
This option reflects the status of the scanner buttons.
--button 4[=(yes|no)] [inactive]
This option reflects the status of the scanner buttons.
--
You are receiving this mail because:
You are watching all bug changes.
