https://bugs.kde.org/show_bug.cgi?id=464660
--- Comment #5 from Philip Soerensen <[email protected]> --- (In reply to fanzhuyifan from comment #4) > The original issue might be a duplicate of BUG 482687, which was fixed in > 6.0.2. Would any of the original reporters be able to verify that? Thanks! > > (In reply to Philip Soerensen from comment #3) > > I also experience the same behaviour. Specifically, my 2560x1600 (a 16:10 > > ratio) fails to switch correctly between left and right quick tiles > > I don't think I understand what "fails to switch correctly between left and > right quick tiles" means. Could you provide a screen recording and/or some > more explanation? Thanks! Sorry for the lack of details. I meant that my problem very closely replicates the behaviour of the original reporter. 1) Set the scaling ratio to 165% or 170% 2) Open any window, e.g. Dolphin 3) Quick tile to the left or right 4) Quick tile directly between left and right Expected behaviour: The window snaps immediately to the new position. Observed behaviour: The window initially doesn't respond (at least visually) to the quick tile command. The window appears to be stuck in the original location as long as it is left undisturbed. The window eventually moves to the expected location once it is disturbed by pressing a key or moving the cursor over the stuck window. I believe the action forces an update of the window, which then updates in the correct position. A few quirks: 1) The amount of "disturbance" a window requires before snapping into the expected place appears to depend on the application. Okular appears to work entirely as expected, Dolphin behaves as described above, and Firefox appears to be stuck in the wrong (old) location until it is unselected even if the window continues to be used. For Firefox, I need to selected another window before the location of the Firefox window updates and snaps into the expected location. 2) The problem only appears for very specific scaling ratios. 160% works fine, 165% and 170% are broken, and 175% works fine again. However, at 170%, Dolphin appears to have no problem going quick tiling from right to left, but fails in the manner described above when tiling from left to right. 3) The problem only appears when quick tiling directly between left and right. If I go through an intermediate state, such as quick tiling to top or untiling entirely in between the left/right quick tiled states, then there is no problem. -- You are receiving this mail because: You are watching all bug changes.
