https://bugs.kde.org/show_bug.cgi?id=484675
--- Comment #2 from `{third: "Beedell", first: "Roke"}`{.JSON5}
<4wy78...@rokejulianlockhart.addy.io> ---
(In reply to `{third: "Beedell", first: "Roke"}`{.JSON5} from comment #0)
> RokeJulianLockhart@sayw4i:~$ SANE_DEBUG_EPSON2=16 skanlite
> [18:37:02.158611] [sanei_debug] Setting debug level of epson2 to 16.
> [18:37:02.158633] [epson2] sane_epson2_init: version 1.2.1
> [18:37:02.158702] [epson2] sane_epson2_get_devices
> [18:37:02.158707] [epson2] probe_devices
> [18:37:02.158711] [epson2] free_devices
> [18:37:02.158722] [epson2] attach_one_config: len = 10, line = scsi EPSON
> [18:37:02.158908] [epson2] attach_one_config: len = 3, line = usb
> [18:37:02.158914] [epson2] attach_one_usb: dev = libusb:005:013
> [18:37:02.158918] [epson2] attach: devname = libusb:005:013, type = 3
> [18:37:02.158923] [epson2] e2_dev_init
> [18:37:02.158928] [epson2] open_scanner: libusb:005:013
> [18:37:02.158956] [epson2] scanner opened
> [18:37:02.158961] [epson2] found valid Epson scanner: 0x4b8/0x1116
> (vendorID/productID)
> [18:37:02.158966] [epson2] e2_set_model: model is 'generic'
> [18:37:02.158971] [epson2] esci_reset
> [18:37:02.158975] [epson2] e2_cmd_simple: size = 2
> [18:37:02.158980] [epson2] e2_send: size = 2, reply = 1
> [18:37:02.158984] [epson2] e2_send: ESC @
> [18:37:02.159018] [epson2] e2_recv: size = 1, buf = 0x7f3298bfe4f7
> [18:37:02.159764] [epson2] e2_txrx: eds_recv status, Success
> [18:37:02.159775] [epson2] e2_discover_capabilities
> [18:37:02.159780] [epson2] esci_request_identity
> [18:37:02.159785] [epson2] e2_cmd_info_block, params len = 2, reply len = 0,
> buf = 0x7f3298bfe4b8
> [18:37:02.159790] [epson2] e2_send: size = 2, reply = 0
> [18:37:02.159795] [epson2] e2_send: ESC I
> [18:37:02.161021] [epson2] e2_recv: size = 4, buf = 0x7f3298bfe392
> [18:37:02.162337] [epson2] e2_recv_info_block: payload length: 19
> [18:37:02.162348] [epson2] e2_recv: size = 19, buf = 0x7f32700044d0
> [18:37:02.163081] [epson2] e2_set_cmd_level: D7
> [18:37:02.163093] [epson2] e2_add_resolution: add (dpi): 75
> [18:37:02.163098] [epson2] e2_add_resolution: add (dpi): 300
> [18:37:02.163103] [epson2] e2_add_resolution: add (dpi): 600
> [18:37:02.163107] [epson2] e2_add_resolution: add (dpi): 1200
> [18:37:02.163112] [epson2] maximum scan area: 10200x14040
> [18:37:02.163116] [epson2] e2_set_fbf_area: 0.000000,0.000000
> 215.899994,297.179993 1200 [mm]
> [18:37:02.163124] [epson2] esci_request_status
> [18:37:02.163128] [epson2] e2_send: size = 2, reply = 4
> [18:37:02.163133] [epson2] e2_send: ESC F
> [18:37:02.164254] [epson2] e2_recv: size = 4, buf = 0x7f3298bfe402
> [18:37:02.165849] [epson2] status: 42
> [18:37:02.165854] [epson2] scanner in use on another interface
> [18:37:02.165859] [epson2] no option equipment installed
> [18:37:02.165863] [epson2] support extended commands
> [18:37:02.165867] [epson2] detection with request_extended_status
> [18:37:02.165872] [epson2] esci_request_extended_status
> [18:37:02.165876] [epson2] e2_cmd_info_block, params len = 2, reply len = 42,
> buf = 0x7f3298bfe438
> [18:37:02.165881] [epson2] e2_send: size = 2, reply = 46
> [18:37:02.165886] [epson2] e2_send: ESC f
> [18:37:02.166711] [epson2] e2_recv: size = 4, buf = 0x7f3298bfe372
> [18:37:02.168261] [epson2] e2_recv_info_block: payload length: 42
> [18:37:02.168269] [epson2] e2_recv: size = 42, buf = 0x7f3270033100
> [18:37:02.169076] [epson2] main = 01, ADF = 00, TPU = 00, main 2 = c0
> [18:37:02.169081] [epson2] e2_set_model: model is 'PID 1116'
> [18:37:02.169085] [epson2] push button detected
> [18:37:02.169090] [epson2] e2_set_fbf_area: 0.000000,0.000000
> 215.899994,297.179993 1200 [mm]
> [18:37:02.169095] [epson2] no command available to detect capabilities
> [18:37:02.169099] [epson2] esci_request_identity2
> [18:37:02.169104] [epson2] e2_cmd_info_block, params len = 2, reply len = 0,
> buf = 0x7f3298bfe4b8
> [18:37:02.169109] [epson2] e2_send: size = 2, reply = 0
> [18:37:02.169113] [epson2] e2_send: ESC i
> [18:37:02.182786] [epson2] e2_recv: size = 4, buf = 0x7f3298bfe392
> [18:37:02.183627] [epson2] e2_recv_info_block: payload length: 40
> [18:37:02.183637] [epson2] e2_recv: size = 40, buf = 0x7f3270032be0
> [18:37:02.184495] [epson2] discovering max depth, NAKs are expected
> [18:37:02.184500] [epson2] e2_add_depth: add (bpp): 8
> [18:37:02.184505] [epson2] maximum supported color depth: 8
> [18:37:02.184509] [epson2] esci_request_focus_position
> [18:37:02.184514] [epson2] getting focus is not supported
> [18:37:02.184518] [epson2] esci_request_scanner_status
> [18:37:02.184523] [epson2] e2_send: size = 2, reply = 16
> [18:37:02.184527] [epson2] e2_send: FS F
> [18:37:02.185659] [epson2] e2_recv: size = 16, buf = 0x7f3298bfe4c0
> [18:37:02.187108] [epson2] e2_txrx: eds_recv status, Success
> [18:37:02.187115] [epson2] global status : 0x41
> [18:37:02.187121] [epson2] not ready
> [18:37:02.187128] [epson2] warmup can be cancelled
> [18:37:02.187134] [epson2] adf status : 0x00
> [18:37:02.187140] [epson2] not installed
> [18:37:02.187147] [epson2] not enabled
> [18:37:02.187153] [epson2] tpu status : 0x00
> [18:37:02.187161] [epson2] not installed
> [18:37:02.187168] [epson2] not enabled
> [18:37:02.187174] [epson2] device type : 0xc0
> [18:37:02.187180] [epson2] main body status: 0x00
> [18:37:02.187186] [epson2] e2_dev_post_init
> [18:37:02.187193] [epson2] CCT model id is 0x00, profile offset 0
> [18:37:02.187201] [epson2] highest available resolution: 1200
> [18:37:02.187209] [epson2] esci_reset
> [18:37:02.187216] [epson2] e2_cmd_simple: size = 2
> [18:37:02.187223] [epson2] e2_send: size = 2, reply = 1
> [18:37:02.187230] [epson2] e2_send: ESC @
> [18:37:02.187993] [epson2] e2_recv: size = 1, buf = 0x7f3298bfe4f7
> [18:37:02.189384] [epson2] e2_txrx: eds_recv status, Success
> [18:37:02.189389] [epson2] scanner model: PID 1116
> [18:37:02.189393] [epson2] close_scanner: fd = 0
> [18:37:02.189398] [epson2] esci_request_extended_status
> [18:37:02.189402] [epson2] e2_cmd_info_block, params len = 2, reply len = 42,
> buf = 0x7f3298bfe568
> [18:37:02.189406] [epson2] e2_send: size = 2, reply = 46
> [18:37:02.189411] [epson2] e2_send: ESC f
> [18:37:02.190647] [epson2] e2_recv: size = 4, buf = 0x7f3298bfe4a2
> [18:37:02.191784] [epson2] e2_recv_info_block: payload length: 42
> [18:37:02.191789] [epson2] e2_recv: size = 42, buf = 0x7f3270017990
> [18:37:02.192951] [epson2] main = 01, ADF = 00, TPU = 00, main 2 = c0
> [18:37:02.192967] [epson2] attach_one_config: len = 17, line = net
> autodiscovery
> [18:37:02.193015] [epson2] e2_network_discovery, sent discovery packet
> [18:37:03.194335] [epson2] e2_network_discovery, end
> [18:37:03.194377] [epson2] sane_epson2_get_devices - results:
> [18:37:03.194385] [epson2] 0 (3): PID 1116
> [18:37:04.648223] [epson2] sane_epson2_open: name = libusb:005:013
> [18:37:04.648257] [epson2] handle obtained
> [18:37:04.648264] [epson2] open_scanner: libusb:005:013
> [18:37:04.648340] [epson2] scanner opened
> [18:37:04.648346] [epson2] esci_reset
> [18:37:04.648350] [epson2] e2_cmd_simple: size = 2
> [18:37:04.648355] [epson2] e2_send: size = 2, reply = 1
> [18:37:04.648361] [epson2] e2_send: ESC @
> [18:37:04.648392] [epson2] e2_recv: size = 1, buf = 0x7ffc10017c27
> [18:37:04.649039] [epson2] e2_txrx: eds_recv status, Success
> kf.i18n: Trying to convert empty KLocalizedString to QString.
> kf.i18n: Trying to convert empty KLocalizedString to QString.
> [18:37:09.453695] [epson2] * sane_epson2_close
> [18:37:09.453716] [epson2] close_scanner: fd = 0
> [18:37:09.453722] [epson2] esci_request_status
> [18:37:09.453727] [epson2] e2_send: size = 2, reply = 4
> [18:37:09.453732] [epson2] e2_send: ESC F
> [18:37:09.453794] [epson2] e2_recv: size = 4, buf = 0x7ffc10016f42
> [18:37:09.454933] [epson2] status: 02
> [18:37:09.454938] [epson2] ready
> [18:37:09.454943] [epson2] no option equipment installed
> [18:37:09.454947] [epson2] support extended commands
> [18:37:09.980353] [epson2] sane_epson2_get_devices
> [18:37:09.980368] [epson2] probe_devices
> [18:37:09.980374] [epson2] free_devices
> [18:37:09.980384] [epson2] attach_one_config: len = 10, line = scsi EPSON
> [18:37:09.980564] [epson2] attach_one_config: len = 3, line = usb
> [18:37:09.980570] [epson2] attach_one_usb: dev = libusb:005:013
> [18:37:09.980575] [epson2] attach: devname = libusb:005:013, type = 3
> [18:37:09.980581] [epson2] e2_dev_init
> [18:37:09.980585] [epson2] open_scanner: libusb:005:013
> [18:37:09.980613] [epson2] scanner opened
> [18:37:09.980618] [epson2] found valid Epson scanner: 0x4b8/0x1116
> (vendorID/productID)
> [18:37:09.980623] [epson2] e2_set_model: model is 'generic'
> [18:37:09.980628] [epson2] esci_reset
> [18:37:09.980632] [epson2] e2_cmd_simple: size = 2
> [18:37:09.980637] [epson2] e2_send: size = 2, reply = 1
> [18:37:09.980642] [epson2] e2_send: ESC @
> [18:37:09.980674] [epson2] e2_recv: size = 1, buf = 0x7f3286dfe4f7
> [18:37:09.981322] [epson2] e2_txrx: eds_recv status, Success
> [18:37:09.981327] [epson2] e2_discover_capabilities
> [18:37:09.981332] [epson2] esci_request_identity
> [18:37:09.981336] [epson2] e2_cmd_info_block, params len = 2, reply len = 0,
> buf = 0x7f3286dfe4b8
> [18:37:09.981341] [epson2] e2_send: size = 2, reply = 0
> [18:37:09.981346] [epson2] e2_send: ESC I
> [18:37:09.982755] [epson2] e2_recv: size = 4, buf = 0x7f3286dfe392
> [18:37:09.983885] [epson2] e2_recv_info_block: payload length: 19
> [18:37:09.983897] [epson2] e2_recv: size = 19, buf = 0x7f3270013890
> [18:37:09.984688] [epson2] e2_set_cmd_level: D7
> [18:37:09.984693] [epson2] e2_add_resolution: add (dpi): 75
> [18:37:09.984698] [epson2] e2_add_resolution: add (dpi): 300
> [18:37:09.984702] [epson2] e2_add_resolution: add (dpi): 600
> [18:37:09.984707] [epson2] e2_add_resolution: add (dpi): 1200
> [18:37:09.984711] [epson2] maximum scan area: 10200x14040
> [18:37:09.984716] [epson2] e2_set_fbf_area: 0.000000,0.000000
> 215.899994,297.179993 1200 [mm]
> [18:37:09.984723] [epson2] esci_request_status
> [18:37:09.984728] [epson2] e2_send: size = 2, reply = 4
> [18:37:09.984733] [epson2] e2_send: ESC F
> [18:37:09.985904] [epson2] e2_recv: size = 4, buf = 0x7f3286dfe402
> [18:37:09.987386] [epson2] status: 02
> [18:37:09.987393] [epson2] ready
> [18:37:09.987399] [epson2] no option equipment installed
> [18:37:09.987405] [epson2] support extended commands
> [18:37:09.987411] [epson2] detection with request_extended_status
> [18:37:09.987418] [epson2] esci_request_extended_status
> [18:37:09.987424] [epson2] e2_cmd_info_block, params len = 2, reply len = 42,
> buf = 0x7f3286dfe438
> [18:37:09.987431] [epson2] e2_send: size = 2, reply = 46
> [18:37:09.987438] [epson2] e2_send: ESC f
> [18:37:09.988273] [epson2] e2_recv: size = 4, buf = 0x7f3286dfe372
> [18:37:09.989671] [epson2] e2_recv_info_block: payload length: 42
> [18:37:09.989677] [epson2] e2_recv: size = 42, buf = 0x7f325c002770
> [18:37:09.990576] [epson2] main = 01, ADF = 00, TPU = 00, main 2 = c0
> [18:37:09.990581] [epson2] e2_set_model: model is 'PID 1116'
> [18:37:09.990585] [epson2] push button detected
> [18:37:09.990589] [epson2] e2_set_fbf_area: 0.000000,0.000000
> 215.899994,297.179993 1200 [mm]
> [18:37:09.990596] [epson2] no command available to detect capabilities
> [18:37:09.990601] [epson2] esci_request_identity2
> [18:37:09.990605] [epson2] e2_cmd_info_block, params len = 2, reply len = 0,
> buf = 0x7f3286dfe4b8
> [18:37:09.990609] [epson2] e2_send: size = 2, reply = 0
> [18:37:09.990613] [epson2] e2_send: ESC i
> [18:37:10.004180] [epson2] e2_recv: size = 4, buf = 0x7f3286dfe392
> [18:37:10.004966] [epson2] e2_recv_info_block: payload length: 40
> [18:37:10.004972] [epson2] e2_recv: size = 40, buf = 0x7f325c002040
> [18:37:10.005847] [epson2] discovering max depth, NAKs are expected
> [18:37:10.005852] [epson2] e2_add_depth: add (bpp): 8
> [18:37:10.005856] [epson2] maximum supported color depth: 8
> [18:37:10.005861] [epson2] esci_request_focus_position
> [18:37:10.005865] [epson2] getting focus is not supported
> [18:37:10.005869] [epson2] esci_request_scanner_status
> [18:37:10.005874] [epson2] e2_send: size = 2, reply = 16
> [18:37:10.005879] [epson2] e2_send: FS F
> [18:37:10.006998] [epson2] e2_recv: size = 16, buf = 0x7f3286dfe4c0
> [18:37:10.008504] [epson2] e2_txrx: eds_recv status, Success
> [18:37:10.008511] [epson2] global status : 0x01
> [18:37:10.008518] [epson2] warmup can be cancelled
> [18:37:10.008524] [epson2] adf status : 0x00
> [18:37:10.008533] [epson2] not installed
> [18:37:10.008539] [epson2] not enabled
> [18:37:10.008546] [epson2] tpu status : 0x00
> [18:37:10.008552] [epson2] not installed
> [18:37:10.008559] [epson2] not enabled
> [18:37:10.008565] [epson2] device type : 0xc0
> [18:37:10.008571] [epson2] main body status: 0x00
> [18:37:10.008578] [epson2] e2_dev_post_init
> [18:37:10.008586] [epson2] CCT model id is 0x00, profile offset 0
> [18:37:10.008592] [epson2] highest available resolution: 1200
> [18:37:10.008601] [epson2] esci_reset
> [18:37:10.008608] [epson2] e2_cmd_simple: size = 2
> [18:37:10.008616] [epson2] e2_send: size = 2, reply = 1
> [18:37:10.008623] [epson2] e2_send: ESC @
> [18:37:10.009366] [epson2] e2_recv: size = 1, buf = 0x7f3286dfe4f7
> [18:37:10.010640] [epson2] e2_txrx: eds_recv status, Success
> [18:37:10.010644] [epson2] scanner model: PID 1116
> [18:37:10.010649] [epson2] close_scanner: fd = 0
> [18:37:10.010653] [epson2] esci_request_extended_status
> [18:37:10.010658] [epson2] e2_cmd_info_block, params len = 2, reply len = 42,
> buf = 0x7f3286dfe568
> [18:37:10.010662] [epson2] e2_send: size = 2, reply = 46
> [18:37:10.010667] [epson2] e2_send: ESC f
> [18:37:10.012136] [epson2] e2_recv: size = 4, buf = 0x7f3286dfe4a2
> [18:37:10.013160] [epson2] e2_recv_info_block: payload length: 42
> [18:37:10.013167] [epson2] e2_recv: size = 42, buf = 0x7f325c004fb0
> [18:37:10.014204] [epson2] main = 01, ADF = 00, TPU = 00, main 2 = c0
> [18:37:10.014222] [epson2] attach_one_config: len = 17, line = net
> autodiscovery
> [18:37:10.014260] [epson2] e2_network_discovery, sent discovery packet
> [18:37:11.015279] [epson2] e2_network_discovery, end
> [18:37:11.015315] [epson2] sane_epson2_get_devices - results:
> [18:37:11.015320] [epson2] 0 (3): PID 1116
> [18:37:11.423110] [epson2] sane_epson2_open: name = libusb:005:013
> [18:37:11.423140] [epson2] handle obtained
> [18:37:11.423147] [epson2] open_scanner: libusb:005:013
> [18:37:11.423218] [epson2] scanner opened
> [18:37:11.423225] [epson2] esci_reset
> [18:37:11.423231] [epson2] e2_cmd_simple: size = 2
> [18:37:11.423237] [epson2] e2_send: size = 2, reply = 1
> [18:37:11.423243] [epson2] e2_send: ESC @
> [18:37:11.423280] [epson2] e2_recv: size = 1, buf = 0x7ffc10016d27
> [18:37:11.423933] [epson2] e2_txrx: eds_recv status, Success
> kf.i18n: Trying to convert empty KLocalizedString to QString.
> kf.i18n: Trying to convert empty KLocalizedString to QString.
> [18:37:13.222296] [epson2] * sane_epson2_close
> [18:37:13.222319] [epson2] close_scanner: fd = 0
> [18:37:13.222327] [epson2] esci_request_status
> [18:37:13.222334] [epson2] e2_send: size = 2, reply = 4
> [18:37:13.222341] [epson2] e2_send: ESC F
> [18:37:13.222380] [epson2] e2_recv: size = 4, buf = 0x7ffc10017cd2
> [18:37:13.223146] [epson2] status: 02
> [18:37:13.223156] [epson2] ready
> [18:37:13.223163] [epson2] no option equipment installed
> [18:37:13.223168] [epson2] support extended commands
> [18:37:13.225286] [epson2] sane_epson2_exit
> [18:37:13.225297] [epson2] free_devices
--
You are receiving this mail because:
You are watching all bug changes.
