here is the full log of kea attempting to start I also gzipp'ed and uploaded my
leases file to:
https://ufile.io/f2b9
Oct 26 11:40:01 rogi systemd[1]: Starting ISC KEA IPv4 DHCP daemon...
Oct 26 11:40:01 rogi systemd[1]: Started ISC KEA IPv4 DHCP daemon.
Oct 26 11:40:01 rogi kea-dhcp4[20635]: 2016-10-26 11:40:01.720 INFO
[kea-dhcp4.dhcp4/20635]
DHCP4_STARTING Kea DHCPv4 server version 1.0.0 starting
Oct 26 11:40:01 rogi kea-dhcp4[20635]: 2016-10-26 11:40:01.722 INFO
[kea-dhcp4.dhcpsrv/20635]
DHCPSRV_CFGMGR_ADD_IFACE listening on interface eth0
Oct 26 11:40:01 rogi kea-dhcp4[20635]: 2016-10-26 11:40:01.722 INFO
[kea-dhcp4.dhcpsrv/20635]
DHCPSRV_CFGMGR_SOCKET_TYPE_DEFAULT "dhcp-socket-type" not specified , using
default socket type raw
Oct 26 11:40:01 rogi kea-dhcp4[20635]: 2016-10-26 11:40:01.723 INFO
[kea-dhcp4.dhcp4/20635]
DHCP4_CONFIG_NEW_SUBNET a new subnet has been added to configuration:
172.31.0.0/18 with params:
valid-lifetime=4000
Oct 26 11:40:01 rogi kea-dhcp4[20635]: 2016-10-26 11:40:01.724 INFO
[kea-dhcp4.commands/20635]
COMMAND_SOCKET_UNIX_OPEN Command socket opened: UNIX, fd=6,
path=/var/kea/statistics-socket
Oct 26 11:40:01 rogi kea-dhcp4[20635]: 2016-10-26 11:40:01.724 INFO
[kea-dhcp4.dhcpsrv/20635]
DHCPSRV_MEMFILE_DB opening memory file lease database: type=memfile universe=4
Oct 26 11:40:01 rogi kea-dhcp4[20635]: 2016-10-26 11:40:01.724 INFO
[kea-dhcp4.dhcpsrv/20635]
DHCPSRV_MEMFILE_LEASE_FILE_LOAD loading leases from file
/var/lib/kea/kea-leases4.csv
Oct 26 11:40:09 rogi kea-dhcp4[20635]: 2016-10-26 11:40:09.311 ERROR
[kea-dhcp4.dhcp4/20635]
DHCP4_PARSER_FAIL failed to create or run parser for configuration element
lease-database: exceeded
maximum number of failures 100 to read a lease from the lease file
/var/lib/kea/kea-leases4.csv
Oct 26 11:40:09 rogi kea-dhcp4[20635]: 2016-10-26 11:40:09.311 ERROR
[kea-dhcp4.dhcp4/20635]
DHCP4_CONFIG_LOAD_FAIL configuration error using file: /etc/kea/kea-dhcp4.conf,
reason: exceeded
maximum number of failures 100 to read a lease from the lease file
/var/lib/kea/kea-leases4.csv
Oct 26 11:40:09 rogi kea-dhcp4[20635]: 2016-10-26 11:40:09.311 ERROR
[kea-dhcp4.dhcp4/20635]
DHCP4_INIT_FAIL failed to initialize Kea server: configuration error using file
'/etc/kea/kea-dhcp4.conf': exceeded maximum number of failures 100 to read a
lease from the lease
file /var/lib/kea/kea-leases4.csv
Oct 26 11:40:09 rogi kea-dhcp4[20635]: 2016-10-26 11:40:09.311 INFO
[kea-dhcp4.commands/20635]
COMMAND_SOCKET_UNIX_CLOSE Command socket closed: UNIX, fd=6,
path=/var/kea/statistics-socket
Oct 26 11:40:09 rogi systemd[1]: kea-dhcp4-server.service: main process exited,
code=exited,
status=1/FAILURE
Oct 26 11:40:09 rogi systemd[1]: Unit kea-dhcp4-server.service entered failed
state.
On 10/25/2016 05:37 PM, Wlodek Wencel wrote:
> text files like kea_leases.csv reach really good compression ratio. It
> shouldn't reach more than 5Mb, but it is still to much for mailing list
> so if you could upload it somewhere.
>
> Or change logging severity to DEBUG with debug level 99 and see if there
> are additional logs.
>
> Regards,
> Włodek Wencel
>
> On 10/25/2016 11:13 PM, Munroe Sollog wrote:
>> below is my config. My leases file is ~350MB so can't easily attach that to
>> an email.
>>
>>
>> {
>> "Dhcp4":
>> {
>> "control-socket": {
>> "socket-type": "unix",
>> "socket-name": "/var/kea/statistics-socket"
>> },
>> "interfaces-config": {
>> "interfaces": ["eth0" ]
>> },
>> "lease-database": {
>> "type": "memfile"
>> },
>> "expired-leases-processing": {
>> "reclaim-timer-wait-time": 10,
>> "flush-reclaimed-timer-wait-time": 25,
>> "hold-reclaimed-time": 3600,
>> "max-reclaim-leases": 100,
>> "max-reclaim-time": 250,
>> "unwarned-reclaim-cycles": 5
>> },
>> "valid-lifetime": 4000,
>> "subnet4": [
>> {
>> "subnet": "172.31.0.0/18",
>> "pools": [ { "pool": "172.31.1.1 - 172.31.31.254"} ],
>> "option-data": [
>> {
>> "name": "domain-name-servers",
>> "data": "8.8.8.8, 8.8.4.4"
>> },
>> {
>> "name": "routers",
>> "data": "172.31.0.1"
>> },
>> ]
>> }
>>
>> ]
>> },
>>
>> "Logging":
>> {
>> "loggers": [
>> {
>> "name": "kea-dhcp4",
>> "output_options": [
>> {
>> "output": "/var/log/kea-dhcp4.log"
>> }
>> ],
>> "severity": "INFO",
>> "debuglevel": 0
>> },
>> ]
>> }
>> }
>>
>>
>> On 10/25/2016 05:10 PM, Wlodek Wencel wrote:
>>> Hello,
>>> thanks for reporting that issue, I never came across this kind of
>>> problem. Is there a possibility that you could send us leases file and
>>> kea config file?
>>>
>>> Regards,
>>> Włodek Wencel
>>> QA team
>>>
>>> On 10/25/2016 11:05 PM, Todd Simmons (todsimmo) wrote:
>>>> Understood, in my case it was caused by a power outage. I have 14 sites
>>>> running Kea 1.0.0 and that's the only time it's happened.
>>>>
>>>> Sent from my iPhone
>>>>
>>>>> On Oct 25, 2016, at 4:01 PM, Munroe Sollog <[email protected]> wrote:
>>>>>
>>>>> I agree that the file is 'damaged' in some way, and of course if I delete
>>>>> all of the leases I expect
>>>>> it to start fine, but I'd like to figure out the root cause before I just
>>>>> blow the file away.
>>>>>
>>>>> - Munroe
>>>>>
>>>>>> On 10/25/2016 04:59 PM, Todd Simmons (todsimmo) wrote:
>>>>>> I had the same issue after the vm server was shutdown improperly after a
>>>>>> power outage. I opened the file in VI and deleted all the leases (after
>>>>>> saving a copy of course) and then it worked just fine.
>>>>>>
>>>>>> It's possible the file is damaged and that's causing the problem.
>>>>>>
>>>>>> Sent from my iPhone
>>>>>>
>>>>>>> On Oct 25, 2016, at 3:44 PM, Munroe Sollog <[email protected]> wrote:
>>>>>>>
>>>>>>> running 1.0.0 code. I stopped the service a while and then when I went
>>>>>>> to start it I got the
>>>>>>> following error:
>>>>>>>
>>>>>>> kea-dhcp4[14193]: 2016-10-25 16:35:28.129 ERROR [kea-dhcp4.dhcp4/14193]
>>>>>>> DHCP4_INIT_FAIL failed to
>>>>>>> initialize Kea server: configuration error using file
>>>>>>> '/etc/kea/kea-dhcp4.conf': exceeded maximum
>>>>>>> number of failures 100 to read a lease from the lease file
>>>>>>> /var/lib/kea/kea-leases4.csv
>>>>>>>
>>>>>>>
>>>>>>> # kea-dhcp4 -V
>>>>>>> 1.0.0
>>>>>>> tarball
>>>>>>> linked with:
>>>>>>> log4plus 1.0.4
>>>>>>> OpenSSL 1.0.1t 3 May 2016
>>>>>>> database:
>>>>>>> MySQL backend 3.0, library 5.5.52
>>>>>>> PostgreSQL backend 2.0, library 90409
>>>>>>> Memfile backend 2.0
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> A quick google search yeilded the comments from the header file that
>>>>>>> causes the error output, but I
>>>>>>> don't understand why it can't read its lease file all of a sudden. I
>>>>>>> don't know if it is pertinent,
>>>>>>> but there *a lot* of leases in the lease file:
>>>>>>>
>>>>>>> # wc -l /var/lib/kea/kea-leases4.csv
>>>>>>> 4485457 /var/lib/kea/kea-leases4.csv
>>>>>>>
>>>>>>> I obviously don't have 4.4million users though.
>>>>>>>
>>>>>>> --
>>>>>>> Munroe Sollog
>>>>>>> LTS - Senior Network Engineer
>>>>>>> x85002
>>>>>>> _______________________________________________
>>>>>>> Kea-users mailing list
>>>>>>> [email protected]
>>>>>>> https://lists.isc.org/mailman/listinfo/kea-users
>>>>>> _______________________________________________
>>>>>> Kea-users mailing list
>>>>>> [email protected]
>>>>>> https://lists.isc.org/mailman/listinfo/kea-users
>>>>>>
>>>>>
>>>>> --
>>>>> Munroe Sollog
>>>>> LTS - Senior Network Engineer
>>>>> x85002
>>>> _______________________________________________
>>>> Kea-users mailing list
>>>> [email protected]
>>>> https://lists.isc.org/mailman/listinfo/kea-users
>>>>
>>> _______________________________________________
>>> Kea-users mailing list
>>> [email protected]
>>> https://lists.isc.org/mailman/listinfo/kea-users
>>>
>>
--
Munroe Sollog
LTS - Senior Network Engineer
x85002
_______________________________________________
Kea-users mailing list
[email protected]
https://lists.isc.org/mailman/listinfo/kea-users
