Hello.
My setup is the following:
I have 2 client classes:
"client-classes": [
        {
"name":"LabOltMgm",
"test":"option[82].option[150].hex == 0x6441a000"//100.65.160.0
                },
{
"name":"LabOltData",
"test":"option[82].option[150].hex == 0x5cb58840" //92.181.136.64
                }
    ],

And 2 shared subnets
"shared-networks": [
        {
           "name":"GponManagementSubnets",
           "subnet4": [
{
                    "id": 2,
                    "client-class": "LabOltMgm",
                    "option-data": [{"name": "routers","data": "100.65.160.1"} 
],
                    "pools": [{ "pool": "100.65.160.2 - 100.65.160.100"}],
                    "rebind-timer": 600,
                    "renew-timer": 600,
                    "subnet": "100.65.160.0/19",
                    "valid-lifetime": 600
                }
            ]
        },
                {
           "name":"GponDataV4Subnets",
           "subnet4": [
{
                    "id": 3,
                    "client-class": "LabOltData",
                    "option-data": [{"name": 
"routers","data":"92.181.136.65"},{"name":"domain-name-servers","data":"217.12.120.2"}
 ],
                    "pools": [{ "pool": "92.181.136.66 - 92.181.136.126"}],
                    "rebind-timer": 600,
                    "renew-timer": 600,
                    "subnet": "92.181.136.64/26",
                    "valid-lifetime": 600
                }
            ]
        }
],

All works fine exept one moment.
When client tries to do renew of ip address, tries to prolongate his lease, kea 
response with NAK.
The problem is that when client makes simple dhcpdiscover, the packet goes 
broadcast through the router, router acts like dhcp relay and relays packet to 
dhcp server kea with added option 82 suboption 150.
But when client makes dhcp renewal-packet goes unicast directly to dhcp server 
without option 82 suboption 150. As I understand, this causes kea to response 
with NAK, because packet doesn't match to subnet rule
criteria. In the logs I see message "failed to select a subnet for incoming 
packet, src 100.65.160.2, type DHCPREQUEST"

Is there a way to configure kea to accept renewal requests if lease already 
exists and mac address of a client corresponds to stores lease?




_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations 
confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce 
message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages 
electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou 
falsifie. Merci.

This message and its attachments may contain confidential or privileged 
information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete 
this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been 
modified, changed or falsified.
Thank you.

_______________________________________________
ISC funds the development of this software with paid support subscriptions. 
Contact us at https://www.isc.org/contact/ for more information.

To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users.

Kea-users mailing list
[email protected]
https://lists.isc.org/mailman/listinfo/kea-users

Reply via email to