Veronique Lefebure writes: > Ok, this is clear. > It is well described on https://kea.readthedocs.io/en/latest/umls.html#dhcpv4 > -subnet-selection > Can you confirm that "interface" and "relay" parameters, which, in KEA, can b > e configured either at the level of the shared-network, or at the level of th > e subnet, > 1) are both optional parameters and are not really needed in "standard" topol > ogies, and
=> what I said is they are rarely together: either the network is directly attached to the server and the interface used by the server is configured, or the network is not directly attached so there is one (or more) relay and the relay address is configured. > 2) that these 2 parameters don't exist in ISC DHCP. They are new with KEA, > right ? => yes, in ISC DHCP you have to specify them in each subnet member of the shared network or use a group to factor them. In general the ISC DHCP configuration is far less structured than the Kea one... Regards Francis Dupont <fdup...@isc.org> -- ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. Kea-users mailing list Kea-users@lists.isc.org https://lists.isc.org/mailman/listinfo/kea-users