I have tested that as well, and indeed the IP is allocated to the client even if unusable.
> On 19/10/2022 19:49 Marek Greško via Kea-users <[email protected]> > wrote: > > > Hmm, I would expect reservations are not offered if not within the subnet. > > M. > > > > > > Sent with Proton Mail secure email. > > ------- Original Message ------- > On Wednesday, October 19th, 2022 at 19:12, perl-list <[email protected]> > wrote: > > > > > > ----- Original Message ----- > > > > > From: "Marek Greško via Kea-users" [email protected] > > > To: "Dan Oachs" [email protected] > > > Cc: "kea-users" [email protected] > > > Sent: Wednesday, October 19, 2022 12:59:56 PM > > > Subject: Re: [Kea-users] dhcp6 address assignment > > > > > Hello, > > > > > I run into another problems with this. To simplify the migration I use > > > global > > > reservations. I have two definitions for that machine. One for ethernet > > > adapter > > > and one for wifi adapter. Unfortunately the DUID is the same with both > > > interfaces so the kea-dhcp6 cannot start with that configuration. ISC > > > DHCPD6 > > > hed no problem with that and everything was working correctly. It was > > > because I > > > was able to define both mac address and duid. Since I defined different > > > value > > > for mac for wifi there was no conflict. > > > > > Probably the only one solution for this is to drop global reservations and > > > switch to per subnet reservations? > > > > > > It would seem it is best to not use global reservations in your scenario: > > > > "This feature can be used to assign certain parameters, such as hostname or > > other dedicated, host-specific options. It can also be used to assign > > addresses or prefixes. However, global reservations that assign either of > > these bypass the whole topology determination provided by the DHCP logic > > implemented in Kea. It is very easy to misuse this feature and get a > > configuration that is inconsistent. To give a specific example, imagine a > > global reservation for the address 2001:db8:1111::1 and two subnets > > 2001:db8:1111::/48 and 2001:db8:ffff::/48. If global reservations are used > > in both subnets and a device matching global host reservations visits part > > of the network that is covered by 2001:db8:ffff::/48, it will get the IP > > address 2001:db8:ffff::1, which is outside of the prefix announced by its > > local router using router advertisements. Such a configuration is unusable > > or, at the very least, riddled with issues, such as downlink traffic not > > reaching the device." > > > > https://kea.readthedocs.io/en/kea-2.2.0/arm/dhcp6-srv.html?highlight=global > > reservation#global-reservations-in-dhcpv6 > > > > > Thanks > > > > > Marek > > > > > ------- Original Message ------- > > > On Tuesday, October 18th, 2022 at 20:48, Dan Oachs [email protected] wrote: > > > > > > Have you looked at using multiple reservations for the same IP? Would > > > > that solve > > > > any of your issues? > > > > > > [ > > > > https://kea.readthedocs.io/en/latest/arm/dhcp6-srv.html?highlight=unique#multiple-reservations-for-the-same-ip > > > > | > > > > https://kea.readthedocs.io/en/latest/arm/dhcp6-srv.html?highlight=unique#multiple-reservations-for-the-same-ip > > > > ] > > > > > > --Dan > > > > > > On Tue, Oct 18, 2022 at 1:15 PM Marek Greško via Kea-users < [ > > > > mailto:[email protected] | [email protected] ] > wrote: > > > > > > > Hello, > > > > > > > I am in a phase of migration ISC DHCPD into kea and I am suffering > > > > > several > > > > > problems in ipv6 address assignment. > > > > > > > 1. I used to assign same ipv6 address for the same machine which was > > > > > dial boot > > > > > linux/windows. It was possible by assigning same ipv6 address to both > > > > > DUIDs > > > > > before. But in kea this is not allowed. I found out there is a > > > > > possibility to > > > > > assign ipv6 address by MAC address which was not possible in ISC > > > > > DHCPD. I was > > > > > very happy with that finding but fallen into second problem. > > > > > 2. The windows machine got 2 interfaces ethernet and wifi. I > > > > > configured kea to > > > > > assign one ipv6 address to the ethernet adapter and another one to > > > > > the wifi > > > > > adapter. But after investigating logs kea was receiving dhcp6 request > > > > > over wifi > > > > > using the ethernet adapter mac address. How is this possible? Is it > > > > > possible > > > > > the MAC address in DHCP does not match L2 MAC address? I did not > > > > > sniff the > > > > > request, yet. I decided to switch back to DUID assignment since this > > > > > problem is > > > > > worse than the previous. > > > > > 3. Maybe it would be possible to overcome the above problems if kea > > > > > is able to > > > > > match both DUID and MAC address, but it is not allowed in kea. I am > > > > > ought to > > > > > select one option only. Why? > > > > > > > Thanks > > > > > > > Marek > > > > > > > Thanks > > > > > > > Marek > > > > > > > -- > > > > > ISC funds the development of this software with paid support > > > > > subscriptions. > > > > > Contact us at [ https://www.isc.org/contact/ | > > > > > https://www.isc.org/contact/ ] > > > > > for more information. > > > > > > > To unsubscribe visit [ > > > > > https://lists.isc.org/mailman/listinfo/kea-users | > > > > > https://lists.isc.org/mailman/listinfo/kea-users ] . > > > > > > > Kea-users mailing list > > > > > [ mailto:[email protected] | [email protected] ] > > > > > [ https://lists.isc.org/mailman/listinfo/kea-users | > > > > > https://lists.isc.org/mailman/listinfo/kea-users ] > > > > > -- > > > ISC funds the development of this software with paid support > > > subscriptions. > > > Contact us at https://www.isc.org/contact/ for more information. > > > > > To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. > > > > > Kea-users mailing list > > > [email protected] > > > https://lists.isc.org/mailman/listinfo/kea-users > > > > -- > > ISC funds the development of this software with paid support subscriptions. > > Contact us at https://www.isc.org/contact/ for more information. > > > > To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. > > > > Kea-users mailing list > > [email protected] > > https://lists.isc.org/mailman/listinfo/kea-users > -- > ISC funds the development of this software with paid support subscriptions. > Contact us at https://www.isc.org/contact/ for more information. > > To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. > > Kea-users mailing list > [email protected] > https://lists.isc.org/mailman/listinfo/kea-users -- ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. Kea-users mailing list [email protected] https://lists.isc.org/mailman/listinfo/kea-users
