I see you have log configured to "/var/log/kea-dhcp4.log".
-----Original Message----- From: Razvan <[email protected]> To: Kea <[email protected]> Cc: kea-users <[email protected]> Date: Saturday, 21 February 2026 12:10 PM EET Subject: Re: [Kea-users] Kea DHCP4 not working on newly configured bridged network Hi, How is it that the vms acquire ip using secondary server? does the secondary bind on the same interface at the same time? Logs should be under /kea/install/path/var/log/kea I think that only one of your servers successfully binds to the interface and because the server uses reuse port/address the secondary if starts second will receive traffic. From: Stuart <[email protected]> To: kea-users <[email protected]> Date: Saturday, 21 February 2026 3:31 AM EET Subject: [Kea-users] Kea DHCP4 not working on newly configured bridged network Good Morning, I am running Ubuntu 24.04, Kea 2.4.1. I have been using Kea without major issues for a year or two, isc-dhcp for a couple of years prior. During recent kernel updates I decided I was sick of Virtualbox compatibility issues, so I created a bridged network so that I could move my vms (Nextcloud, Stork) to KVM. I am somewhat incompetent, but after about 100 attempts I have managed to setup a bridged network that connects my server to the rest of the network and to the internet. My new KVM VMs are joining the network as if they were real devices. My problem is my kea DHCP4 server. I guess have done something stupid, either with selecting the interface in kea-dhcp4.conf or with configuring my bridged network (br0). At this stage, when I start kea-dhcp4-server, it communicates to my HA standby to to take control of DHCP but then completely fails to provide ip addresses itself. So, the network currently looks like this: dad@macserver:~$ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 2: enp34s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master br0 state UP group default qlen 1000 link/ether 2c:f0:5d:2d:88:35 brd ff:ff:ff:ff:ff:ff 3: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 42:4c:23:6c:4d:7f brd ff:ff:ff:ff:ff:ff inet 192.168.1.104/23 brd 192.168.1.255 scope global noprefixroute br0 valid_lft forever preferred_lft forever inet6 fe80::e54c:73f4:f662:95fb/64 scope link noprefixroute valid_lft forever preferred_lft forever 4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 52:54:00:5b:e6:4e brd ff:ff:ff:ff:ff:ff inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr0 valid_lft forever preferred_lft forever 5: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UNKNOWN group default qlen 1000 link/ether fe:00:27:dc:06:7e brd ff:ff:ff:ff:ff:ff inet6 fe80::fc00:27ff:fedc:67e/64 scope link valid_lft forever preferred_lft forever 6: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UNKNOWN group default qlen 1000 link/ether fe:54:00:80:eb:73 brd ff:ff:ff:ff:ff:ff inet6 fe80::fc54:ff:fe80:eb73/64 scope link valid_lft forever preferred_lft forever The key sections (eliminating all my lease reservations and such) of my dhcp4.conf look like this: { "Dhcp4": { "interfaces-config": { "interfaces": [ "br0" ] }, "control-socket": { "socket-type": "unix", "socket-name": "/run/kea/kea4-ctrl-socket" }, "lease-database": { "type": "memfile", "lfc-interval": 3600 }, "multi-threading": { "enable-multi-threading": true, "thread-pool-size": 2, "packet-queue-size": 14 }, "client-classes": [ { "name": "homeauto" }, { "name": "normal", "test": "not member('homeauto')" } ], "option-data": [ { "space": "dhcp4", "name": "domain-name", "code": 15, "data": "skfaf.servesarcasm.com" }, { "space": "dhcp4", "name": "domain-name-servers", "code": 6, "data": "192.168.1.1" }, { "space": "dhcp4", "name": "broadcast-address", "code": 28, "data": "192.168.1.255" }, { "space": "dhcp4", "name": "routers", "code": 3, "data": "192.168.1.1" }, { "space": "dhcp4", "name": "subnet-mask", "code": 1, "data": "255.255.254.0" } ], "valid-lifetime": 43200, "renew-timer": 21600, "rebind-timer": 32400, "expired-leases-processing": { "reclaim-timer-wait-time": 3600, "hold-reclaimed-time": 172800, "max-reclaim-leases": 0, "max-reclaim-time": 0 }, "dhcp-ddns": { "enable-updates": false }, "authoritative": true, "hooks-libraries": [ { "library": "/usr/lib/x86_64-linux-gnu/kea/hooks/libdhcp_lease_cmds.so" }, { "library": "/usr/lib/x86_64-linux-gnu/kea/hooks/libdhcp_stat_cmds.so" }, { "library": "/usr/lib/x86_64-linux-gnu/kea/hooks/libdhcp_ha.so", "parameters": { "high-availability": [ { "this-server-name": "macserver", "mode": "hot-standby", "heatbeat-delay": 10000, "max-response-delay": 60000, "max-ack-delay": 5000, "max-unacked-clients": 5, "sync-timeout": 60000, "multi-threading": { "enable-multi-threading": true, "http-dedicated-listener": true, "http-listener-threads": 0, "http-client-threads": 0 }, "peers": [ { "name": "macserver", "url": "http://192.168.1.104:8003/";, "role": "primary" }, { "name": "oldhp", "url": "http://192.168.1.110:8003/";, "role": "standby" } ] } ] } } ], "shared-networks": [ { "name": "macnet", "subnet4": [ { "id": 1, "subnet": "192.168.1.0/24", "pools": [ { "pool": "192.168.1.124 - 192.168.1.198", "client-class": "normal" } ], "option-data": [ { "space": "dhcp4", "name": "routers", "code": 3, "data": "192.168.1.1" } ] }, { "id": 2, "subnet": "192.168.0.0/23", "pools": [ { "pool": "192.168.0.150 - 192.168.0.175", "client-class": "homeauto" } ], "option-data": [ { "space": "dhcp4", "name": "routers", "code": 3, "data": "192.168.1.1" }, { "space": "dhcp4", "name": "domain-name-servers", "code": 6, "data": "192.168.1.1" } ] } ] } ], "loggers": [ { "name": "kea-dhcp4", "output_options": [ { "output": "/var/log/kea-dhcp4.log", "maxsize": 2048000, "maxver": 4 } ], "severity": "INFO", "debuglevel": 0 } ] } } I changed my "interface" to "br0" because my previous setup (exerp below) stopped working when I started the br0 network. { "Dhcp4": { "interfaces-config": { "interfaces": [ "enp34s0" ] Changing the interface to "br0" has had exactly no effect. I realise that I have missed something fundamental and I am wasting your valuable time. However I have been trying to sort this out for days (in whatever spare time is available) and I have acheived nothing. Each time I start kea-dhcp-server on my main server it appears in Stork with no errors, systemd says its running fine and my HA standby stops providing dhcp. Unfortunately if I then turn on a device it simply does not receive an ip lease. If I turn off DHCP on the main server then eventually the standby starts takes over dhcp again and network functions return to normal (though this takes a very long time & sometimes requires a restart of kea-dhcp4-server on the stanby server, perhaps another error to fix later). Even my new VMs receive ips seamlessly from the standby server. If you need to see some logs, please tell me where I can retreive them because I haven't been able to work that out either (I think I need to change my logging parameters in kea-dhcp4.conf). I used Wireshark to capture network coms before and after turning on the main dhcp server but I then realised that I was too stupid/ignorant to work out what was going on from the output. I can provided the Wireshark output, but it is a large file (ran it for too long and filtered it poorly, I think) that I won't inflict on you unless you wish it. Please give me some ideas of what I have to do to troubleshoot/fix this. Regards Stuart MacGregor
-- ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. [email protected]
