http://bugzilla.ecoinformatics.org/show_bug.cgi?id=5685
--- Comment #3 from Derik Barseghian <[email protected]> 2012-08-25 02:17:06 PDT --- Doesn't look like trolling through the archive will be necessary. The same problem of a datapackage containing two data with two different sampling rates occurred tonight. I did not receive any errors when adjusting sensor sampling rates in Kepler. Here are the recents of the last archive workflow run: ----------------------------------- Sensor Name: gpp-data/CR800_Batt_Volt Document URL: http://dev2.nceas.ucsb.edu/knb/metacat?action=read&qformat=default&docid=doc.13458810777906caa4227-8260-449b-8fff-11c07741dcc4.1 Time Range: 2012-08-25 02:21:35 ~ 2012-08-25 02:48:58 Number of Records: 1641 Sensor Name: gpp-data/CR800_Batt_Volt Document URL: http://dev2.nceas.ucsb.edu/knb/metacat?action=read&qformat=default&docid=doc.1345881206554a70e25dc-e965-4430-9b17-f99499aff969.1 Time Range: 2012-08-25 02:49:30 ~ 2012-08-25 07:50:36 Number of Records: 602 Sensor Name: gpp-data/CR800_sq311_1 Document URL: http://dev2.nceas.ucsb.edu/knb/metacat?action=read&qformat=default&docid=doc.1345881330868470d3007-65e6-46c3-997d-5d27e37f15ee.1 Time Range: 2012-08-25 02:21:34 ~ 2012-08-25 02:50:50 Number of Records: 826 Sensor Name: gpp-data/CR800_sq311_1 Document URL: http://dev2.nceas.ucsb.edu/knb/metacat?action=read&qformat=default&docid=doc.13458814576456ba0d71b-1962-4034-9ee0-6bc8fb41c29b.1 Time Range: 2012-08-25 03:01:05 ~ 2012-08-25 07:41:06 Number of Records: 29 Sensor Name: gpp-data/CR800_sq311_2 Document URL: http://dev2.nceas.ucsb.edu/knb/metacat?action=read&qformat=default&docid=doc.13458815819617734014f-b2ab-4bd2-85d4-b7a059ca2aa5.1 Time Range: 2012-08-25 02:21:33 ~ 2012-08-25 07:50:36 Number of Records: 356 ----------------------------------- If you look at the raw data for sq311_2, you'll see data at 30s, and then an un-smooth change to 60s: ----------------------------------- 2012-08-25 02:47:33 0.67334365845 2012-08-25 02:48:03 0.67333245277 2012-08-25 02:48:33 0.67334610224 2012-08-25 02:50:30 0.67336404324 2012-08-25 02:51:35 0.67335760593 2012-08-25 02:52:35 0.67335271835 ----------------------------------- Below is the result of dumping the metadata channels from the DT. You can see CR800_sq311_2 does only have one metadata entry. ----------------------------------- someData.length:3 times.length:3 i:0 someData[0]:CR800_Batt_Volt altitude=0.000000,coefficients=,conversion-type=no conversion,daq-method=,isOn=true,latitude=34.412291,longitude=-119.842335,measurement-unit=Volts,sampleMethod=average,samples-per-measurement=1,samplingPeriod=1,sensor-make=Campbell Scientific,sensor-measurement=,sensor-model=,serial-number= i:0 times[0]:1.345870971714E9 i:0 someData[1]:CR800_Batt_Volt altitude=0.000000,coefficients=,conversion-type=no conversion,daq-method=,isOn=true,latitude=34.412291,longitude=-119.842335,measurement-unit=Volts,sampleMethod=average,samples-per-measurement=1,samplingPeriod=30,sensor-make=Campbell Scientific,sensor-measurement=,sensor-model=,serial-number= i:0 times[1]:1.345888139714E9 i:0 someData[2]:CR800_Batt_Volt altitude=0.000000,coefficients=,conversion-type=no conversion,daq-method=,isOn=true,latitude=34.412291,longitude=-119.842335,measurement-unit=Volts,sampleMethod=average,samples-per-measurement=1,samplingPeriod=30,sensor-make=Campbell Scientific,sensor-measurement=,sensor-model=,serial-number= i:0 times[2]:1.345888200714E9 someData.length:1 times.length:1 i:1 someData[0]:CR800_sq311_1 altitude=0.000000,coefficients=,conversion-type=no conversion,daq-method=,isOn=true,latitude=34.412291,longitude=-119.842335,measurement-unit=mV,sampleMethod=average,samples-per-measurement=1,samplingPeriod=2,sensor-make=Apogee Instruments,sensor-measurement=Photosynthetic Photon Flux (PPF),sensor-model=SQ-311 (sun),serial-number=1612 i:1 times[0]:1.345870973714E9 someData.length:1 times.length:1 i:2 someData[0]:CR800_sq311_2 altitude=0.000000,coefficients=,conversion-type=no conversion,daq-method=,isOn=true,latitude=34.412291,longitude=-119.842335,measurement-unit=mV,sampleMethod=average,samples-per-measurement=1,samplingPeriod=30,sensor-make=Apogee Instruments,sensor-measurement=Photosynthetic Photon Flux (PPF),sensor-model=SQ-311 (sun),serial-number=1609 i:2 times[0]:1.345870973714E9 ----------------------------------- So at least we can rule out the archival workflow. We should look at how the Sensor actor is inserting metadata entries to DT, if it can verify they get inserted, etc. -- Configure bugmail: http://bugzilla.ecoinformatics.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA Contact for the bug. _______________________________________________ Kepler-dev mailing list [email protected] http://lists.nceas.ucsb.edu/kepler/mailman/listinfo/kepler-dev
