Thanks Jiajia for the hints. Yes it's my bad entering into the wrong folder.
Below are my trying again, and it worked out.
Some issues can be seen, for example, [output-keytab] means the option isn't a
must, be in fact it does.
I suggest we don't stop here as these are not blocking things.
c:\work\projects\kerby-all-1.0.0-RC2\kerby-dist\kdc-dist>bin\kdcinit.cmd
Usage: bin\kdcinit.cmd [conf-dir] [output-keytab]
This tool initializes KDC backend and should only be performed the
first time,
and the output keytab should be carefully kept to administrate/kadmin
KDC later.
Example:
bin\kdcinit.cmd conf admin.keytab
c:\work\projects\kerby-all-1.0.0-RC2\kerby-dist\kdc-dist>bin\kdcinit.cmd conf
Usage: bin\kdcinit.cmd [conf-dir] [output-keytab]
This tool initializes KDC backend and should only be performed the
first time,
and the output keytab should be carefully kept to administrate/kadmin
KDC later.
Example:
bin\kdcinit.cmd conf admin.keytab
c:\work\projects\kerby-all-1.0.0-RC2\kerby-dist\kdc-dist>bin\kdcinit.cmd .\conf
Usage: bin\kdcinit.cmd [conf-dir] [output-keytab]
This tool initializes KDC backend and should only be performed the
first time,
and the output keytab should be carefully kept to administrate/kadmin
KDC later.
Example:
bin\kdcinit.cmd conf admin.keytab
c:\work\projects\kerby-all-1.0.0-RC2\kerby-dist\kdc-dist>bin\kdcinit.cmd .\conf
admin.keytab
The keytab for kadmin principal has been exported to the specified file
c:\work\projects\kerby-all-1.0.0-RC2\kerby-dist\kdc
ep it, in order to use kadmin tool later
Finished initializing the KDC backend
c:\work\projects\kerby-all-1.0.0-RC2\kerby-dist\kdc-dist>bin\start-kdc.cmd
.\conf
Usage: bin\start-kdc.cmd [conf-dir] [working-dir]
Example:
bin\start-kdc.cmd conf runtime
c:\work\projects\kerby-all-1.0.0-RC2\kerby-dist\kdc-dist>bin\start-kdc.cmd
.\conf c:\tmp
KDC started.
Regards,
Kai
-----Original Message-----
From: Li, Jiajia [mailto:[email protected]]
Sent: Tuesday, March 08, 2016 9:15 AM
To: [email protected]
Subject: RE: [VOTE] Release Apache Kerby 1.0.0-RC2
Hi Kai,
Can you find the jars in directory-kerby/kerby-dist/kdc-dist/target/lib?
Thanks
Jiajia
-----Original Message-----
From: Zheng, Kai [mailto:[email protected]]
Sent: Tuesday, March 08, 2016 9:07 AM
To: [email protected]
Subject: RE: [VOTE] Release Apache Kerby 1.0.0-RC2
Yes I should run the *.cmd ones on windows. But when I tried,
c:\work\projects\kerby\kerby-dist\kdc-dist>bin\kdcinit.cmd
Error: Could not find or load main class
org.apache.kerby.kerberos.tool.kdcinit.KdcInitTool
c:\work\projects\kerby\kerby-dist\kdc-dist>bin\start-kdc.cmd conf
Error: Could not find or load main class
org.apache.kerby.kerberos.kdc.KerbyKdcServer
Regards,
Kai
-----Original Message-----
From: Zheng, Kai [mailto:[email protected]]
Sent: Tuesday, March 08, 2016 7:18 AM
To: [email protected]
Subject: RE: [VOTE] Release Apache Kerby 1.0.0-RC2
Oops, looks like an issue.
After mvn package -Pdist,
$ bin/start-kdc.sh conf
Error: Could not find or load main class
org.apache.kerby.kerberos.kdc.KerbyKdcServer
Or is there anything wrong with my setup? Thanks. Note on Windows.
Regards,
Kai
From: Li, Jiajia [mailto:[email protected]]
Sent: Monday, March 07, 2016 1:24 PM
To: [email protected]; [email protected]
Subject: [VOTE] Release Apache Kerby 1.0.0-RC2
Hi all,
This is the 2st Apache Kerby release (1.0.0-RC2). This is a release candidate,
which means we are reaching an API freeze, but some bugs might be fixed before
we move to an official GA.
Please cast your vote !
The revision :
https://git-wip-us.apache.org/repos/asf?p=directory-kerby.git;a=commit;h=688b4aa0ac5b675af127cf8f3c08e742ca7c9659
Staging repo:
https://repository.apache.org/content/repositories/orgapachedirectory-1077
Source package:
https://home.apache.org/~seelmann/kerby-1.0.0-RC2/
Please cast your votes:
[ ] +1 Release Apache Kerby 1.0.0-RC2
[ ] 0 abstain
[ ] -1 Do not release Apache Kerby 1.0.0-RC2
