Public bug reported:
On Samsung exynos5440 sleds board, ethernet phy is attached as the fixed phy
mode, which can be
seen from the following part in arch/arm/boot/dts/exynos5440-sd5v1.dts of
linux kernel:
gmac: ethernet@00230000 {
fixed-link {
speed = <1000>;
full-duplex;
};
};
Unfortunately the above dts definition doesn't use the standard fixed
link dts binding, also the ethernet driver of stmmac doesn't parse fixed
link binding, so cause ethernet not workable at all on utopic.
The two patches in below tree can add the fixed link support in stmmac
and changes the fixed link description into current standard binding:
git://kernel.ubuntu.com/ming/ubuntu-utopic.git exynos5440-net-fix
72bf502 UBUNTU: SAUCE: (no-up) net: stmmac: add fixed_phy support via
fixed-link DT binding
65a6d09 UBUNTU: SAUCE: (no-up) ARM: exynos5440-sd5v1: switch to
fixed-link DT binding
Thanks,
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Description changed:
On Samsung exynos5440 sleds board, ethernet phy is attached as the fixed phy
mode, which can be
seen from the following part in arch/arm/boot/dts/exynos5440-sd5v1.dts of
linux kernel:
- gmac: ethernet@00230000 {
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
+ gmac: ethernet@00230000 {
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
- Unfortunately the above dts definition doesn't use the standard fixed link
dts binding, also the ethernet
- driver of stmmac doesn't parse fixed link binding, so cause ethernet not
workable at all on utopic.
+ Unfortunately the above dts definition doesn't use the standard fixed
+ link dts binding, also the ethernet driver of stmmac doesn't parse fixed
+ link binding, so cause ethernet not workable at all on utopic.
- The two patches in below tree can add the fixed link support in stmmac and
changes the fixed link
- description into current standard binding:
+ The two patches in below tree can add the fixed link support in stmmac
+ and changes the fixed link description into current standard binding:
- git://kernel.ubuntu.com/ming/ubuntu-utopic.git exynos5440-net-fix
+ git://kernel.ubuntu.com/ming/ubuntu-utopic.git exynos5440-net-fix
72bf502 UBUNTU: SAUCE: (no-up) net: stmmac: add fixed_phy support via
fixed-link DT binding
65a6d09 UBUNTU: SAUCE: (no-up) ARM: exynos5440-sd5v1: switch to
fixed-link DT binding
Thanks,
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1417339
Title:
utopic kernel can't make ethernet workable on Samsung exynos5440 sleds
board
Status in linux package in Ubuntu:
New
Bug description:
On Samsung exynos5440 sleds board, ethernet phy is attached as the fixed phy
mode, which can be
seen from the following part in arch/arm/boot/dts/exynos5440-sd5v1.dts of
linux kernel:
gmac: ethernet@00230000 {
fixed-link {
speed = <1000>;
full-duplex;
};
};
Unfortunately the above dts definition doesn't use the standard fixed
link dts binding, also the ethernet driver of stmmac doesn't parse
fixed link binding, so cause ethernet not workable at all on utopic.
The two patches in below tree can add the fixed link support in stmmac
and changes the fixed link description into current standard binding:
git://kernel.ubuntu.com/ming/ubuntu-utopic.git exynos5440-net-fix
72bf502 UBUNTU: SAUCE: (no-up) net: stmmac: add fixed_phy support via
fixed-link DT binding
65a6d09 UBUNTU: SAUCE: (no-up) ARM: exynos5440-sd5v1: switch to
fixed-link DT binding
Thanks,
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1417339/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
