@talat-b87
It seems to me that the link is up, I have no clue why the link is being
showed as failed.
Settings for eth7:
Supported ports: [ ]
Supported link modes: 1000baseT/Full
1000baseKX/Full
10000baseT/Full
10000baseKX4/Full
10000baseKR/Full
40000baseKR4/Full
40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
Supported pause frame use: No
Supports auto-negotiation: No
Advertised link modes: 1000baseT/Full
1000baseKX/Full
10000baseT/Full
10000baseKX4/Full
10000baseKR/Full
40000baseKR4/Full
40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 56000Mb/s
Duplex: Full
Port: Other
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Link detected: yes
[ 17.666714] mlx4_core 0000:08:00.0: mlx4_ib: Port 1 logical link is up
root@nova-compute:/home/ubuntu# ibstat
CA 'mlx4_0'
CA type: MT4103
Number of ports: 2
Firmware version: 2.35.5100
Hardware version: 0
Node GUID: 0xe41d2d03000a1120
System image GUID: 0xe41d2d03000a1123
Port 1:
State: Active
Physical state: LinkUp
Rate: 56
Base lid: 3
LMC: 0
SM lid: 2
Capability mask: 0x02514868
Port GUID: 0xe41d2d03000a1121
Link layer: InfiniBand
@inaddy, Could you please copy this to vivid/trusty series?
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1507482
Title:
ethtool self-test failed and creates a FW reset.
Status in linux package in Ubuntu:
In Progress
Bug description:
On ConnectX3 device we try to run self-test and it’s failed, also seen
that cause a FW reset.
Steps to reproduce:
~# ethtool -t ens2
The test result is FAIL
The test extra info:
Interrupt Test -16
Link Test 0
Speed Test 0
Register Test 0
Loopback Test 0
~# dmesg
[341548.619799] mlx4_core 0000:07:00.0: command 0x31 timed out (go bit not
cleared)
[341548.803801] mlx4_core 0000:07:00.0: command 0x49 timed out (go bit not
cleared)
[341548.803808] mlx4_core 0000:07:00.0: device is going to be reset
[341549.816587] mlx4_core 0000:07:00.0: device was reset successfully
[341549.823425] mlx4_en 0000:07:00.0: Internal error detected, restarting
device
~# cat /etc/os-release
NAME="Ubuntu"
VERSION="15.10 (Wily Werewolf)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu Wily Werewolf (development branch)"
VERSION_ID="15.10"
HOME_URL="http://www.ubuntu.com/";
SUPPORT_URL="http://help.ubuntu.com/";
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/";
~# uname -r
4.2.0-7-generic
~# ethtool -i ens2
driver: mlx4_en
version: 2.2-1 (Feb 2014)
firmware-version: 2.34.5000
bus-info: 0000:07:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: yes
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1507482/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
