Running Mint18
uname -a
Linux Bobs-Mint18-PC 4.4.0-62-generic #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC
2017 x86_64 x86_64 x86_64 GNU/Linux
lspci:
06:00.0 Ethernet controller: Qualcomm Atheros Killer E220x Gigabit Ethernet
Controller (rev 10)
Subsystem: Gigabyte Technology Co., Ltd Killer E220x Gigabit Ethernet
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe200000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at c000 [size=128]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s unlimited, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [c0] MSI: Enable- Count=1/16 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: ffff0000 Pending: 00000000
Capabilities: [d8] MSI-X: Enable- Count=16 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 0e, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [180 v1] Device Serial Number ff-01-7c-ae-1c-1b-0d-ff
Kernel driver in use: alx
Kernel modules: alx
Wants to fill up my logs:
277.294499] alx 0000:06:00.0 enp6s0: fatal interrupt 0x200, resetting
[ 277.296155] alx 0000:06:00.0 enp6s0: NIC Up: 1 Gbps Full
and on and on and on...
I have to do an 'ifconfig eth0 down' to stop it.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1510038
Title:
atheros ar8161 wired ethernet doesn't work
Status in linux package in Ubuntu:
Confirmed
Bug description:
having a new hard disk, I'have installed the last relaese of ubuntu 15.10.
Previousmy, I was running a 15.04 version upgrade from 13.04 ubuntu through
13.10 14.04 and 14.10.
My nic was working, not now.
Is there a solution to make it worked
I 've found this solution
http://askubuntu.com/questions/165192/how-do-i-install-drivers-for-the-atheros-ar8161-ethernet-controller
but I have this error :
make
make -C /lib/modules/4.2.0-16-generic/build
M=/home/isanaud/compat-wireless-2012-07-03-pc modules
make[1]: Entering directory '/usr/src/linux-headers-4.2.0-16-generic'
/home/isanaud/compat-wireless-2012-07-03-pc/config.mk:21: *** "ERROR:
compat-wireless by default supports kernels >= 2.6.24, try enabling only one
driver though". Arrêt.
Makefile:1398: recipe for target
'_module_/home/isanaud/compat-wireless-2012-07-03-pc' failed
make[1]: *** [_module_/home/isanaud/compat-wireless-2012-07-03-pc] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.2.0-16-generic'
Makefile:86: recipe for target 'modules' failed
make: *** [modules] Error 2
---
ApportVersion: 2.19.1-0ubuntu3
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/pcmC0D0p: arnaud 1689 F...m pulseaudio
/dev/snd/controlC0: arnaud 1689 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 15.10
HibernationDevice: RESUME=UUID=82584e6a-7be7-4020-97cb-69af146c560f
InstallationDate: Installed on 2015-10-22 (3 days ago)
InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
MachineType: ASUSTeK COMPUTER INC. N56VZ
Package: linux (not installed)
ProcFB:
0 inteldrmfb
1 nouveaufb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-16-generic.efi.signed
root=UUID=c0cf975f-8195-45cf-bc8f-21a708d8ea52 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.2.0-16.19-generic 4.2.3
RelatedPackageVersions:
linux-restricted-modules-4.2.0-16-generic N/A
linux-backports-modules-4.2.0-16-generic N/A
linux-firmware 1.149
Tags: wily
UdevLog: Error: [Errno 2] Aucun fichier ou dossier de ce type: '/var/log/udev'
Uname: Linux 4.2.0-16-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 03/15/2012
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: N56VZ.202
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: N56VZ
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: 1.0
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK COMPUTER INC.
dmi.chassis.version: 1.0
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrN56VZ.202:bd03/15/2012:svnASUSTeKCOMPUTERINC.:pnN56VZ:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN56VZ:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
dmi.product.name: N56VZ
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK COMPUTER INC.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1510038/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
