This bug was fixed in the package linux - 4.10.0-11.13
---------------
linux (4.10.0-11.13) zesty; urgency=low
[ Tim Gardner ]
* Release Tracking Bug
- LP: #1669127
* linux-tools-common should Depends: lsb-release (LP: #1667571)
- [Config] linux-tools-common depends on lsb-release
* Ubuntu (Zesty): When we miss LSI/INTx interrupts on slot, message is too
imprecise (LP: #1668382)
- of/irq: improve error report on irq discovery process failure
* Zesty update to v4.10.1 stable release (LP: #1668993)
- ptr_ring: fix race conditions when resizing
- ip: fix IP_CHECKSUM handling
- net: socket: fix recvmmsg not returning error from sock_error
- tty: serial: msm: Fix module autoload
- USB: serial: mos7840: fix another NULL-deref at open
- USB: serial: cp210x: add new IDs for GE Bx50v3 boards
- USB: serial: ftdi_sio: fix modem-status error handling
- USB: serial: ftdi_sio: fix extreme low-latency setting
- USB: serial: ftdi_sio: fix line-status over-reporting
- USB: serial: spcp8x5: fix modem-status handling
- USB: serial: opticon: fix CTS retrieval at open
- USB: serial: ark3116: fix register-accessor error handling
- USB: serial: console: fix uninitialised spinlock
- x86/platform/goldfish: Prevent unconditional loading
- goldfish: Sanitize the broken interrupt handler
- netfilter: nf_ct_helper: warn when not applying default helper assignment
- ACPICA: Linuxize: Restore and fix Intel compiler build
- block: fix double-free in the failure path of cgwb_bdi_init()
- rtlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/down
- xfs: clear delalloc and cache on buffered write failure
- Linux 4.10.1
* [UBUNTU Zesty] mlx5 - Improve OVS offload driver (LP: #1668019)
- net/sched: cls_flower: Disallow duplicate internal elements
- net/sched: cls_flower: Properly handle classifier flags dumping
- net/sched: cls_matchall: Dump the classifier flags
- net/sched: Reflect HW offload status
- net/sched: cls_flower: Reflect HW offload status
- net/sched: cls_matchall: Reflect HW offloading status
- net/sched: cls_u32: Reflect HW offload status
- net/sched: cls_bpf: Reflect HW offload status
- net/mlx5: Push min-inline mode resolution helper into the core
- IB/mlx5: Enable Eth VFs to query their min-inline value for user-space
- net/mlx5: Use exact encap header size for the FW input buffer
- net/mlx5e: Add TC offloads matching on IPv6 encapsulation headers
- net/mlx5e: TC ipv4 tunnel encap offload cosmetic changes
- net/mlx5e: Use the full tunnel key info for encapsulation offload house-
keeping
- net/mlx5e: Maximize ip tunnel key usage on the TC offloading path
- net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels
- net/mlx5: E-Switch, Enlarge the FDB size for the switchdev mode
- net/mlx5: Fix static checker warnings
* [Hyper-V] Ubuntu 14.04.2 LTS Generation 2 SCSI Errors on VSS Based Backups
(LP: #1470250)
- SAUCE: Tools: hv: vss: Thaw the filesystem and continue after freeze fails
* Ubuntu17.04: Need more patches for aacraid to bring up Boston System
(LP: #1668726)
- scsi: aacraid: Remove duplicate irq management code
- scsi: aacraid: Added aacraid.h include guard
- scsi: aacraid: added support for init_struct_8
- scsi: aacraid: Added sa firmware support
- scsi: aacraid: Retrieve and update the device types
- scsi: aacraid: Reworked scsi command submission path
- scsi: aacraid: Process Error for response I/O
- scsi: aacraid: Added support for response path
- scsi: aacraid: Added support for read medium error
- scsi: aacraid: Reworked aac_command_thread
- scsi: aacraid: Added support for periodic wellness sync
- scsi: aacraid: Retrieve Queue Depth from Adapter FW
- scsi: aacraid: Added support to set QD of attached drives
- scsi: aacraid: Added support for hotplug
- scsi: aacraid: Include HBA direct interface
- scsi: aacraid: Add task management functionality
- scsi: aacraid: Added support to abort cmd and reset lun
- scsi: aacraid: VPD 83 type3 support
- scsi: aacraid: Added new IWBR reset
- scsi: aacraid: Added ioctl to trigger IOP/IWBR reset
- scsi: aacraid: Retrieve HBA host information ioctl
- scsi: aacraid: Update copyrights
- scsi: aacraid: Change Driver Version Prefix
- scsi: aacraid: update version
- scsi: aacraid: rcode is unsigned and should be signed int
- scsi: aacraid: avoid open-coded upper_32_bits
- scsi: aacraid: Fix camel case
- scsi: aacraid: Use correct channel number for raw srb
- scsi: aacraid: Fix for excessive prints on EEH
- scsi: aacraid: Prevent E3 lockup when deleting units
- scsi: aacraid: Fix memory leak in fib init path
- scsi: aacraid: Added sysfs for driver version
- scsi: aacraid: Fix sync fibs time out on controller reset
- scsi: aacraid: Skip wellness sync on controller failure
- scsi: aacraid: Reload offlined drives after controller reset
- scsi: aacraid: Decrease adapter health check interval
- scsi: aacraid: Skip IOP reset on controller panic(SMART Family)
- scsi: aacraid: Reorder Adapter status check
- scsi: aacraid: Save adapter fib log before an IOP reset
- scsi: aacraid: Fix a potential spinlock double unlock bug
- scsi: aacraid: Update driver version
- scsi: aacraid: Fixed expander hotplug for SMART family
* Ubuntu 17.04: "Oops: Exception in kernel mode, sig: 5 [#1]" seen during
fadump over ssh on Alpine machine. (LP: #1655241)
- Revert "UBUNTU: SAUCE: powerpc/fadump: set an upper limit for boot memory
size"
- SAUCE: powerpc/fadump: set an upper limit for boot memory size (V2)
* CAPI:Ubuntu: Kernel panic while rebooting (LP: #1667599)
- pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot()
- pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts
- pci/hotplug/pnv-php: Disable MSI and PCI device properly
* Nvlink2: Additional patches (LP: #1667081)
- powerpc/powernv: Initialise nest mmu
- powerpc/powernv: Use OPAL call for TCE kill on NVLink2
- powerpc/mm: refactor radix physical page mapping
- powerpc/mm: add radix__create_section_mapping()
- powerpc/mm: add radix__remove_section_mapping()
- powerpc/mm: unstub radix__vmemmap_remove_mapping()
- [Config] Enforce CONFIG_MOVABLE_NODE=y for ppc64el
* PowerNV: No rate limit for kernel error "KVM can't copy data from"
(LP: #1667416)
- SAUCE: KVM: PPC: Book3S: Ratelimit copy data failure error messages
* Please disable unnecessary config options in the Ubuntu 17.04 kernel config
(LP: #1667490)
- [Config] Disable experimental IMA options
* POWER9: AST: Improve AST 2500 support (LP: #1667424)
- SAUCE: drm/ast: Handle configuration without P2A bridge
- SAUCE: drm/ast: const'ify mode setting tables
- SAUCE: drm/ast: Remove spurrious include
- SAUCE: drm/ast: Fix calculation of MCLK
- SAUCE: drm/ast: Base support for AST2500
- SAUCE: drm/ast: Fixed vram size incorrect issue on POWER
- SAUCE: drm/ast: Factor mmc_test code in POST code
- SAUCE: drm/ast: Rename ast_init_dram_2300 to ast_post_chip_2300
- SAUCE: drm/ast: POST code for the new AST2500
- SAUCE: drm/ast: Fix test for VGA enabled
- SAUCE: drm/ast: Call open_key before enable_mmio in POST code
* POWER9: Additional patches for 17.04 and 16.04.2 (LP: #1667116)
- powerpc/mm: Update PROTFAULT handling in the page fault path
- powerpc/mm/radix: Update pte update sequence for pte clear case
- powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full
mm
- powerpc/mm/radix: Skip ptesync in pte update helpers
- SAUCE: powerpc/mm/hash: Always clear UPRT and Host Radix bits when
setting up CPU
* POWER9: Improve PMU capabilites (LP: #1667413)
- powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags()
- powerpc/perf: Avoid FAB_*_MATCH checks for power9
- powerpc/perf: Add restrictions to PMC5 in power9 DD1
- powerpc/perf: Use Instruction Counter value
- powerpc/perf: Use PM_INST_DISP for generic instructions sample
- powerpc/perf: Add alternative event table and function for power9
- powerpc/perf: Add PM_INST_DISP event to Power9 event list
- powerpc/perf: Factor out event_alternative function
* Miscellaneous Ubuntu changes
- [Config] CONFIG_QCOM_FALKOR_ERRATUM_1009=y
- [Config] CONFIG_QCOM_L2_PMU=y
- [Config] CONFIG_QCOM_FALKOR_ERRATUM_1003=y
- ubuntu: vbox -- Update to 5.1.14-dfsg-2
* Miscellaneous upstream changes
- arm64: errata: Provide macro for major and minor cpu revisions
- arm64: Define Falkor v1 CPU
- arm64: Use __tlbi() macros in KVM code
- arm64: Work around Falkor erratum 1009
- perf: add qcom l2 cache perf events driver
- arm64: arch_timer: document Hisilicon erratum 161010101
- arm64: Work around Falkor erratum 1003
- ACPI/IORT: Fix iort_node_get_id() mapping entries indexing
- net: qcom/emac: add ethtool support
- Revert "net: qcom/emac: configure the external phy to allow pause frames"
- net: qcom/emac: rename emac_phy to emac_sgmii and move it
- net: qcom/emac: claim the irq only when the device is opened
- net: qcom/emac: display the phy driver info after we connect
- net: qcom/emac: always use autonegotiation to configure the SGMII link
- net: qcom/emac: do not call emac_mac_start twice
- net: qcom/emac: remove extraneous wake-on-lan code
- net: qcom/emac: add an error interrupt handler for the sgmii
- net: qcom/emac: add ethool support for setting pause parameters
- net: qcom/emac: fix semicolon.cocci warnings
- net: qcom/emac: add ethtool support for reading hardware registers
- net: qcom/emac: add ethtool support for setting ring parameters
- net: qcom/emac: fix a sizeof() typo
linux (4.10.0-10.12) zesty; urgency=low
[ Tim Gardner ]
* Release Tracking Bug
- LP: #1666636
* POWER9 : Enable Stop 0-2 with ESL=EC=0 (LP: #1666197)
- powernv:idle: Add IDLE_STATE_ENTER_SEQ_NORET macro
- powernv:stop: Rename pnv_arch300_idle_init to pnv_power9_idle_init
- cpuidle:powernv: Add helper function to populate powernv idle states.
- powernv: Pass PSSCR value and mask to power9_idle_stop
- Documentation:powerpc: Add device-tree bindings for power-mgt
* ecryptfs fails to load block cipher on ppc64el (LP: #1666483)
- [Config] CONFIG_CRYPTO_DEV_VMX=n
* [ubuntu 16.10] Enable OPTPROBES for powerpc (LP: #1585741)
- powerpc/bpf: Introduce __PPC_SH64()
- powerpc: Add helper to check if offset is within relative branch range
- powerpc/kprobes: Fixes for kprobe_lookup_name() on BE
- powerpc/kprobes: Implement Optprobes
- powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()
* Miscellaneous Ubuntu changes
- [Config] CONFIG_QCOM_IRQ_COMBINER=y
- [Config] CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
- [Config] CONFIG_HISILICON_ERRATUM_161010101=y
* Miscellaneous upstream changes
- ACPI: Generic GSI: Do not attempt to map non-GSI IRQs during bus scan
- ACPI: Add support for ResourceSource/IRQ domain mapping
- irqchip/qcom: Add IRQ combiner driver
- clocksource/drivers/arm_arch_timer: Add dt binding for
hisilicon-161010101 erratum
- clocksource/drivers/arm_arch_timer: Remove fsl-a008585 parameter
- clocksource/drivers/arm_arch_timer: Introduce generic errata handling
infrastructure
- clocksource/drivers/arm_arch_timer: Work around Hisilicon erratum
161010101
- iommu/dma: Allow MSI-only cookies
- iommu: Rename iommu_dm_regions into iommu_resv_regions
- iommu: Add a new type field in iommu_resv_region
- iommu: iommu_alloc_resv_region
- iommu: Only map direct mapped regions
- iommu: iommu_get_group_resv_regions
- iommu: Implement reserved_regions iommu-group sysfs file
- iommu/vt-d: Implement reserved region get/put callbacks
- iommu/amd: Declare MSI and HT regions as reserved IOVA regions
- iommu/arm-smmu: Implement reserved region get/put callbacks
- iommu/arm-smmu-v3: Implement reserved region get/put callbacks
- irqdomain: Add irq domain MSI and MSI_REMAP flags
- genirq/msi: Set IRQ_DOMAIN_FLAG_MSI on MSI domain creation
- irqdomain: irq_domain_check_msi_remap
- irqchip/gicv3-its: Sets IRQ_DOMAIN_FLAG_MSI_REMAP
- vfio/type1: Allow transparent MSI IOVA allocation
- vfio/type1: Check MSI remapping at irq domain level
- iommu/arm-smmu: Do not advertise IOMMU_CAP_INTR_REMAP anymore
- iommu/arm-smmu-v3: Clear prior settings when updating STEs
- iommu/arm-smmu-v3: limit use of 2-level stream tables
- iommu/arm-smmu: Support for Extended Stream ID (16 bit)
- iommu/arm-smmu: Fix for ThunderX erratum #27704
linux (4.10.0-9.11) zesty; urgency=low
[ Tim Gardner ]
* Release Tracking Bug
- LP: #1666214
* linux: disable CONFIG_PCIEPORTBUS in the kernel (LP: #1665404)
- [Config] CONFIG_PCIEPORTBUS=n for ppc64el
* linux-lts-xenial 4.4.0-63.84~14.04.2 ADT test failure with linux-lts-xenial
4.4.0-63.84~14.04.2 (LP: #1664912)
- SAUCE: apparmor: fix link auditing failure due to, uninitialized var
* Ubuntu 17.04: "Oops: Exception in kernel mode, sig: 5 [#1]" seen during
fadump over ssh on Alpine machine. (LP: #1655241)
- SAUCE: powerpc/fadump: set an upper limit for boot memory size
* In Ubuntu 17.04 : after reboot getting message in console like Unable to
open file: /etc/keys/x509_ima.der (-2) (LP: #1656908)
- SAUCE: ima: Downgrade error to warning
* NFS client : permission denied when trying to access subshare, since kernel
4.4.0-31 (LP: #1649292)
- fs: Better permission checking for submounts
* Miscellaneous Ubuntu changes
- SAUCE: (noup) Update spl to 0.6.5.9-1, zfs to 0.6.5.9-2
- [Config] CONFIG_SCSI_HISI_SAS=m on arm64
- d-i: Add hisi_sas_v2_hw to scsi-modules
- d-i: Add hns_enet_drv to nic-modules
- d-i: Add supporting modules for hns_enet_drv to nic-modules
- rebase to v4.10
[ Upstream Kernel Changes ]
* rebase to v4.10
-- Seth Forshee <seth.fors...@canonical.com> Thu, 23 Feb 2017 12:32:41
-0600
** Changed in: linux (Ubuntu)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1667413
Title:
POWER9: Improve PMU capabilites
Status in linux package in Ubuntu:
Fix Released
Bug description:
== Comment: #0 - Breno Henrique Leitao <bren...@br.ibm.com> - 2017-02-23
11:27:50 ==
Hi Canonical,
In order to enable Ubuntu to read the PMU properly on a POWER9 system,
the following commits are required:
a2391b35f1 powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags()
78a16d9fc1 powerpc/perf: Avoid FAB_*_MATCH checks for power9
8d911904f3 powerpc/perf: Add restrictions to PMC5 in power9 DD1
356d8ce3d0 powerpc/perf: Use Instruction Counter value
8a088542c8 powerpc/perf: Use PM_INST_DISP for generic instructions sample
a114aca57a powerpc/perf: Add alternative event table and function for
power9
ac19670eb1 powerpc/perf: Add PM_INST_DISP event to Power9 event list
efe881afdd powerpc/perf: Factor out event_alternative function
We need to have these patches in the kernel if we want to use perf,
for example.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1667413/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
