I found a solution with 'acpi=off'.
Now show the correct cpu MHz but doesn't work Frequency Scaling.
:~$ sudo dmidecode -t processor | grep Speed
Max Speed: 2700 MHz
Current Speed: 3051 MHz
:~$ dmesg | grep MHz
[ 0.000000] tsc: Detected 3033.877 MHz processor
vagrale@vagrale-desktop:~$ lscpu | grep MHz
CPU MHz: 3033.877
:~$ cpupower -c all frequency-info
analyzing CPU 0:
no or unknown cpufreq driver is active on this CPU
CPUs which run at the same hardware frequency: Not Available
CPUs which need to have their frequency coordinated by software: Not Available
maximum transition latency: Cannot determine or is not supported.
hardware limits: Not Available
available cpufreq governors: Not Available
Unable to determine current policy
current CPU frequency: Unable to call hardware
current CPU frequency: Unable to call to kernel
boost state support:
Supported: no
Active: no
analyzing CPU 1:
no or unknown cpufreq driver is active on this CPU
CPUs which run at the same hardware frequency: Not Available
CPUs which need to have their frequency coordinated by software: Not Available
maximum transition latency: Cannot determine or is not supported.
hardware limits: Not Available
available cpufreq governors: Not Available
Unable to determine current policy
current CPU frequency: Unable to call hardware
current CPU frequency: Unable to call to kernel
boost state support:
Supported: no
Active: no
:~$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) X2 215 Processor
stepping : 2
microcode : 0x10000c7
cpu MHz : 3033.877
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid eagerfpu
pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a
misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv
svm_lock nrip_save
bugs : tlb_mmatch apic_c1e fxsave_leak sysret_ss_attrs
bogomips : 6067.75
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) X2 215 Processor
stepping : 2
microcode : 0x10000c7
cpu MHz : 3033.877
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid eagerfpu
pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a
misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv
svm_lock nrip_save
bugs : tlb_mmatch apic_c1e fxsave_leak sysret_ss_attrs
bogomips : 6067.75
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/379873
Title:
CPU Frequency Scaling Monitor reports incorrect CPU speeds when
overclocked
Status in linux package in Ubuntu:
Expired
Bug description:
The reported frequencies of an overclocked Core 2 Duo are incorrect.
Benchmarking and performance testing can confirm that the CPU is
running at the overclocked speeds, but the values reported through
cpuinfo are the standard stock speeds.
CPU has been overclocked from stock 3.00GHz to 3.60GHz. This can be
confirmed through dmidecode (output attached). The issue is that
cpuinfo (and related utilities) all report the stock CPU speeds
instead. This is only a visual/reporting issue. The CPU is still
throttling correctly, and the speed is correct as per the overclocking
ratio.
i.e. (tested and confirmed in benchmarks & Bogomips)
Reported 2.00Ghz = (3.6/3.0 * 2.0) = 2.40GHz True Clock Speed
Reported 3.00Ghz = (3.6/3.0 * 3.0) = 3.60GHz True Clock Speed
There are a few reports of this in the Ubuntu forums, however no
resolution had been found. I have updated the BIOS on my motherboard
(ASUS P5Q) to the latest available, with no changes. All other BIOS
options are per standard - allowing CPU throttling/etc.
Bug #132403 makes reference to this similar issue, but this is not a
BIOS problem, only a reporting problem.
Compare:
cat /proc/cpuinfo
cpufreq-info
dmidecode --type processor
Only dmidecode is reporting the correct CPU speed as set in the BIOS.
Regards,
Robert.
---
Architecture: amd64
DistroRelease: Ubuntu 10.04
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release amd64 (20091027)
NonfreeKernelModules: nvidia
Package: cpufrequtils 006-2
PackageArchitecture: amd64
ProcEnviron:
LANG=en_NZ.utf8
SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5
Tags: lucid
Uname: Linux 2.6.32-24-generic x86_64
UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare vboxusers
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/379873/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
