This bug was fixed in the package linux - 4.10.0-28.32
---------------
linux (4.10.0-28.32) zesty; urgency=low
* linux: 4.10.0-28.32 -proposed tracker (LP: #1701013)
* KILLER1435-S[0489:e0a2] BT cannot search BT 4.0 device (LP: #1699651)
- Bluetooth: btusb: Add support for 0489:e0a2 QCA_ROME device
* aacraid driver may return uninitialized stack data to userspace
(LP: #1700077)
- SAUCE: scsi: aacraid: Don't copy uninitialized stack memory to userspace
* CVE-2017-9605
- drm/vmwgfx: Make sure backup_handle is always valid
* CVE-2017-1000380
- ALSA: timer: Fix race between read and ioctl
- ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
* XDP eBPF programs fail to verify on Zesty ppc64el (LP: #1699627)
- [Config] ppc64el: build for Power8 not Power7
* AACRAID for power9 platform (LP: #1689980)
- scripts/spelling.txt: add "therfore" pattern and fix typo instances
- scsi: aacraid: fix PCI error recovery path
- scsi: aacraid: pci_alloc_consistent() failures on ARM64
- scsi: aacraid: Remove __GFP_DMA for raw srb memory
- scsi: aacraid: Fix DMAR issues with iommu=pt
- scsi: aacraid: Added 32 and 64 queue depth for arc natives
- scsi: aacraid: Set correct Queue Depth for HBA1000 RAW disks
- scsi: aacraid: Remove reset support from check_health
- scsi: aacraid: Change wait time for fib completion
- scsi: aacraid: Log count info of scsi cmds before reset
- scsi: aacraid: Print ctrl status before eh reset
- scsi: aacraid: Using single reset mask for IOP reset
- scsi: aacraid: Rework IOP reset
- scsi: aacraid: Add periodic checks to see IOP reset status
- scsi: aacraid: Rework SOFT reset code
- scsi: aacraid: Rework aac_src_restart
- scsi: aacraid: Use correct function to get ctrl health
- scsi: aacraid: Make sure ioctl returns on controller reset
- scsi: aacraid: Enable ctrl reset for both hba and arc
- scsi: aacraid: Add reset debugging statements
- scsi: aacraid: Remove reference to Series-9
- scsi: aacraid: Update driver version to 50834
* arm64 kernel crashdump support (LP: #1694859)
- memblock: add memblock_clear_nomap()
- memblock: add memblock_cap_memory_range()
- arm64: limit memory regions based on DT property, usable-memory-range
- arm64: kdump: reserve memory for crash dump kernel
- arm64: mm: add set_memory_valid()
- arm64: mm: use phys_addr_t instead of unsigned long in __map_memblock
- arm64: kdump: protect crash dump kernel memory
- arm64: hibernate: preserve kdump image around hibernation
- arm64: kdump: implement machine_crash_shutdown()
- arm64: kdump: add VMCOREINFO's for user-space tools
- [Config] CONFIG_CRASH_DUMP=y on arm64
- arm64: kdump: provide /proc/vmcore file
- Documentation: kdump: describe arm64 port
- Documentation: dt: chosen properties for arm64 kdump
- efi/libstub/arm*: Set default address and size cells values for an empty
dtb
* hibmc driver does not include "pci:" prefix in bus ID (LP: #1698700)
- SAUCE: drm: hibmc: Use set_busid function from drm core
* Processes in "D" state due to zap_pid_ns_processes kernel call with Ubuntu +
Docker (LP: #1698264)
- pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes
* Bugfixes for hns network driver (LP: #1696031)
- hns_enet: use cpumask_var_t for on-stack mask
- net: hns: fix uninitialized data use
- net: hns: avoid gcc-7.0.1 warning for uninitialized data
- net: hns: Add ACPI support to check SFP present
- net: hns: Fix the implementation of irq affinity function
- net: hns: Modify GMAC init TX threshold value
- net: hns: Optimize the code for GMAC pad and crc Config
- net: hns: Remove redundant memset during buffer release
- net: hns: bug fix of ethtool show the speed
- net: hns: Optimize hns_nic_common_poll for better performance
- net: hns: Fix to adjust buf_size of ring according to mtu
- net: hns: Replace netif_tx_lock to ring spin lock
- net: hns: Correct HNS RSS key set function
- net: hns: Remove the redundant adding and deleting mac function
- net: hns: Remove redundant mac_get_id()
- net: hns: Remove redundant mac table operations
- net: hns: Clean redundant code from hns_mdio.c file
- net: hns: Optimise the code in hns_mdio_wait_ready()
- net: hns: Simplify the exception sequence in hns_ppe_init()
- net: hns: Adjust the SBM module buffer threshold
- net: hns: Avoid Hip06 chip TX packet line bug
- net: hns: Some checkpatch.pl script & warning fixes
- net: hns: support deferred probe when can not obtain irq
- net: hns: support deferred probe when no mdio
- net: hns: fix ethtool_get_strings overflow in hns driver
* CVE-2017-7346
- drm/vmwgfx: limit the number of mip levels in
vmw_gb_surface_define_ioctl()
* [SRU][Zesty] qcom_emac is unable to get ip address with at803x phy driver.
(LP: #1696143)
- net: qcom/emac: do not use hardware mdio automatic polling
* hisi_sas driver updates (LP: #1695999)
- scsi: hisi_sas: service v2 hw CQ ISR with tasklet
- scsi: hisi_sas: lock sensitive regions when servicing CQ interrupt
- scsi: hisi_sas: lock sensitive region in hisi_sas_slot_abort()
- scsi: hisi_sas: workaround v2 hw SATA IO timeout issue
- scsi: hisi_sas: modify some values of ITCT table
- scsi: hisi_sas: downgrade refclk message
- scsi: hisi_sas: modify hard reset for directed-attached disk
- scsi: hisi_sas: downgrade internal abort exit print
- scsi: hisi_sas: fix probe ordering problem
- scsi: hisi_sas: decrease running_req in hisi_sas_slot_task_free()
- scsi: hisi_sas: add to_hisi_sas_port()
- scsi: hisi_sas: add controller reset
- scsi: hisi_sas: move PHY init to hisi_sas_scan_start()
- scsi: hisi_sas: add softreset function for SATA disk
- scsi: hisi_sas: remove hisi_sas_port_deformed()
- scsi: hisi_sas: error hisi_sas_task_prep() when port down
- scsi: hisi_sas: only reset link for PHY_FUNC_LINK_RESET
- scsi: hisi_sas: modify error handling for v2 hw
- scsi: hisi_sas: modify hisi_sas_abort_task() for SSP
- scsi: hisi_sas: hardreset for SATA disk in LU reset
- scsi: hisi_sas: check for SAS_TASK_STATE_ABORTED in slot complete
- scsi: hisi_sas: free slots after hardreset
- scsi: hisi_sas: fix some sas_task.task_state_lock locking
- scsi: hisi_sas: remove task free'ing for timeouts
- scsi: hisi_sas: process error codes according to their priority
- scsi: hisi_sas: some modifications to v2 hw reg init values
- scsi: hisi_sas: handle PHY UP+DOWN simultaneous irq
- scsi: hisi_sas: rename hisi_sas_link_timeout_{enable, disable}_link
- scsi: hisi_sas: add hisi_sas_clear_nexus_ha()
- scsi: hisi_sas: release SMP slot in lldd_abort_task
- scsi: hisi_sas: check hisi_sas_lu_reset() error message
- scsi: hisi_sas: use dev_is_sata to identify SATA or SAS disk
- scsi: hisi_sas: add is_sata_phy_v2_hw()
- scsi: hisi_sas: add missing break in switch statement
- scsi: hisi_sas: fix SATA dependency
- scsi: hisi_sas: workaround STP link SoC bug
- scsi: hisi_sas: workaround a SoC SATA IO processing bug
- scsi: hisi_sas: workaround SoC about abort timeout bug
- scsi: hisi_sas: add v2 hw internal abort timeout workaround
- scsi: hisi_sas: fix NULL deference when TMF timeouts
- scsi: hisi_sas: controller reset for multi-bits ECC and AXI fatal errors
* [SRU][Zesty] fix soft lockup on overcommited hugepages (LP: #1696165)
- mm/migrate: fix refcount handling when !hugepage_migration_supported()
* HiSilicon D05: installer doesn't appear on VGA (LP: #1698954)
- d-i: Add hibmc-drm to kernel-image udeb
* Fix /proc/cpuinfo revision for POWER9 DD2 (LP: #1698844)
- SAUCE: powerpc: Fix /proc/cpuinfo revision for POWER9 DD2
* CVE-2014-9900
- net: Zeroing the structure ethtool_wolinfo in ethtool_get_wol()
* OpenPower: Some multipaths temporarily have only a single path
(LP: #1696445)
- scsi: ses: don't get power status of SES device slot on probe
-- Juerg Haefliger <juerg.haefli...@canonical.com> Thu, 29 Jun 2017
11:14:43 +0200
** Changed in: linux (Ubuntu Zesty)
Status: Fix Committed => Fix Released
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2014-9900
** CVE added: https://cve.mitre.org/cgi-
bin/cvename.cgi?name=2017-1000380
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2017-7346
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2017-9605
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1696143
Title:
[SRU][Zesty] qcom_emac is unable to get ip address with at803x phy
driver.
Status in linux package in Ubuntu:
Incomplete
Status in linux source package in Zesty:
Fix Released
Bug description:
[Impact]
qcom_emac is unable to get ip address with at803x phy driver. Use software
polling (PHY_POLL) to check for link state changes instead of relying on the
EMAC's hardware polling feature. Some PHY drivers are unable to get a
functioning link because the HW polling is not robust enough.
The emac interface is the onboard nic on the QDF2400 platform. A non
working emac would be a cert blocker for this platform.
[Test]
Boot the netboot DI installer on QDF2400, and chose the emac interface, the
install will fail because the emac interface is unable to get an IP lease.
Also, on an installed system the emac driver is unable to get ip address.
[Fix]
Patch is in Dave Miller's 'net' repo:
https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git/commit/id=246096690be0742d9bb5f3456d2cb95b68f7b46d
[Regression]
The patch is to emac driver which is only available on the QDF2400 platform
so there is no risk of regression to other ARM64 platforms or platforms based
on other architectures. You can see detailed test results on the comments
sections below.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1696143/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
