In response to #7, I don't think this is the same issue.  The cryptswap
initiates with no difficulties, timeouts, etc. on boot.  When I first
installed Bionic, ubiquity did not correctly install the swap, and I
filed #1759253 on that issue.

You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.

  Cryptoswap not working in Bionic

Status in linux package in Ubuntu:
Status in linux source package in Bionic:

Bug description:
  I have cryptoswap set up both with the 2 GB default swap file and an 8
  GB swap partition with 8 GB of ram.  However, the system does not use
  this swap when it should.  For example, if I run a little test code
  which attempts to allocate 10 GB of memory in 1 GB chuncks, the system
  hangs with no obvious use of swap.  E.g. running top shows no swap use
  before the hang.  However, if I replace cryptoswap by standard swap,
  it works as expected: allocates the requested memory and exits, using
  swap.  Of course, my disk is slow, so this takes some time but it does

  I originally noticed this problem when compiling a very large
  application.  The system would hang on ld.  I've checked hardware
  using memtest and stress.  No problems.  This took me days to track
  down but I'm 99% certain now that the problem is with cryptoswap.  If
  I compile with cryptoswap: hang.  If I compile with standard swap: no

  ProblemType: Bug
  DistroRelease: Ubuntu 18.04
  Package: linux-image-4.15.0-13-generic 4.15.0-13.14
  ProcVersionSignature: Ubuntu 4.15.0-13.14-generic 4.15.10
  Uname: Linux 4.15.0-13-generic x86_64
  ApportVersion: 2.20.9-0ubuntu4
  Architecture: amd64
   /dev/snd/controlC1:  weinberg   2425 F.... pulseaudio
   /dev/snd/controlC0:  weinberg   2425 F.... pulseaudio
  CurrentDesktop: ubuntu:GNOME
  Date: Mon Apr  9 11:57:23 2018
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=UUID=8d33a538-4ec4-418d-b277-be1a9a1c1113
  InstallationDate: Installed on 2018-03-12 (28 days ago)
  InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180114)
  MachineType: LENOVO 20ARA0S100
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-13-generic 
root=UUID=b6683bc1-7dd5-4afd-8e70-f69253403b71 ro quiet splash vt.handoff=1
   linux-restricted-modules-4.15.0-13-generic N/A
   linux-backports-modules-4.15.0-13-generic  N/A
   linux-firmware                             1.173
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install) 03/19/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: GJET74WW (2.24 )
  dmi.board.asset.tag: Not Available 20ARA0S100
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Defined
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
dmi:bvnLENOVO:bvrGJET74WW(2.24):bd03/19/2014:svnLENOVO:pn20ARA0S100:pvrThinkPadT440s:rvnLENOVO:rn20ARA0S100:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: ThinkPad T440s 20ARA0S100
  dmi.product.version: ThinkPad T440s
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:

Mailing list:
Post to     :
Unsubscribe :
More help   :

Reply via email to