apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1164557/+attachment/3904108/+files/PulseList.txt
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1164557 Title: Laptop to hot - VID to high Status in “linux” package in Ubuntu: Incomplete Bug description: My laptop goes to very hign temperature. First I think it was a fan problem. I adjusted thinkfan to use the disengaded option. Now my fan ist at maximim speed if the temperature goes over 67°C. But still it is not possible to run the laptop for a longer time an 100% CPU. It then overheats and stops working. For example just after clamscan starts working the fan is at maximum speed (5600 revolutions) and the tempurature goes up over 85°C, the CPU usage is the about 70%. My standard governer is "ondemand". By using "powersave" the temparure will be about 5-10°C decrease. My investigation show me that in my oppinum the VID is to high. To varify this i do the following: - rdmsr -p0 [1] 0x0199 for every speed steps - the governer "ondemand" switches the MSR 0x199 between - 0x0613, which means 1GHz and 1.275V? - 0x081c, which means 1,33GHz and 1.3875V? - 0x0b28, which means 1,83GHz and 1.5375V? > by 100% CPU the laptop overheats and stops - set the governer to userspace 1.833GHz - reduce the VID using: wrmsr -p0 [1] 0x0199 0x0b20 > the temparature goes not over 65°C by starting load that goes to 100% CPU!. I see that the VID is allways set to 0x0b28 when the governer change the speed to the highest speed. I don't know if the governer or an other kernel module set the VID The Sped (FID) is selected by the governer. The FID/VID vor maximum should be set to 0x0b20 instead 0x0B28 and every thing would fine. Here are some infos about my system: It is a lenovo Thinkpad R60 rainer@BN591-LINUX:~$ sudo lshw -C display; uname -a; lsb_release -a *-display description: VGA compatible controller product: Radeon Mobility X1400 vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:16 memory:d8000000-dfffffff ioport:2000(size=256) memory:ee000000-ee00ffff memory:ee020000-ee03ffff Linux BN591-LINUX 3.2.0-40-generic-pae #64-Ubuntu SMP Mon Mar 25 21:44:41 UTC 2013 i686 i686 i386 GNU/Linux No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.2 LTS Release: 12.04 Codename: precise rainer@BN591-LINUX:~$ --- ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 DistroRelease: Ubuntu 12.04 MarkForUpload: True Package: linux (not installed) Tags: precise Uname: Linux 3.9.0-030900rc5-generic i686 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to precise on 2012-12-12 (113 days ago) UserGroups: adm admin audio avahi avahi-autoipd backup cdrom chipcard crontab daemon dialout dip disk fax floppy fuse gammu gdm gnokii gnumed gsmsms haldaemon libuuid list lp lpadmin mail man messagebus mlocate mysql mythtv netdev ntp nvram operator plugdev polkituser postgres powerdev root rtkit sambashare scanner shadow smsd src ssh ssl-cert sudo sys syslog tape tty users utempter utmp uucp vboxusers vdr video voice www-data --- ApportVersion: 2.12.6-0ubuntu1 Architecture: i386 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3165 F.... pulseaudio CasperVersion: 1.336ubuntu1 CurrentDmesg: [ 71.182993] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 71.185122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 71.982542] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 [ 72.055058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 72.055518] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready DistroRelease: Ubuntu 14.04 LiveMediaBuild: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha i386 (20131108) MachineType: LENOVO 9461DXG MarkForUpload: True Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcFB: 0 radeondrmfb ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.12.0-2.5-generic 3.12.0 RelatedPackageVersions: linux-restricted-modules-3.12.0-2-generic N/A linux-backports-modules-3.12.0-2-generic N/A linux-firmware 1.117 Tags: trusty Uname: Linux 3.12.0-2-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/28/2009 dmi.bios.vendor: LENOVO dmi.bios.version: 7CETD3WW (2.23 ) dmi.board.name: 9461DXG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr7CETD3WW(2.23):bd08/28/2009:svnLENOVO:pn9461DXG:pvrThinkPadR60:rvnLENOVO:rn9461DXG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 9461DXG dmi.product.version: ThinkPad R60 dmi.sys.vendor: LENOVO --- ApportVersion: 2.12.6-0ubuntu1 Architecture: i386 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3165 F.... pulseaudio CasperVersion: 1.336ubuntu1 CurrentDmesg: [ 71.182993] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 71.185122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 71.982542] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 [ 72.055058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 72.055518] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready DistroRelease: Ubuntu 14.04 LiveMediaBuild: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha i386 (20131108) MachineType: LENOVO 9461DXG MarkForUpload: True Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcFB: 0 radeondrmfb ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.12.0-2.5-generic 3.12.0 RelatedPackageVersions: linux-restricted-modules-3.12.0-2-generic N/A linux-backports-modules-3.12.0-2-generic N/A linux-firmware 1.117 Tags: trusty Uname: Linux 3.12.0-2-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/28/2009 dmi.bios.vendor: LENOVO dmi.bios.version: 7CETD3WW (2.23 ) dmi.board.name: 9461DXG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr7CETD3WW(2.23):bd08/28/2009:svnLENOVO:pn9461DXG:pvrThinkPadR60:rvnLENOVO:rn9461DXG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 9461DXG dmi.product.version: ThinkPad R60 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1164557/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
