Hey! This bug may be fixed.As best I recall I did a fresh install from nightly
build about 3 days ago, but had not installed zoneminder so no op to tickle the
bug.
Today I did an upgrade and a dist-upgrade, then loaded zoneminder, started
pulling data over renesas port, so far no dmesg errors, I think it's fixed.
Did you fix it? Well blessings on whoever did.
I'll let you know if it pops up again. Thank you so much
On Tuesday, May 29, 2018, 1:11:03 PM PDT, Joseph Salisbury
<joseph.salisb...@canonical.com> wrote:
I built a patched test kernel. The test kernel can be downloaded from:
http://kernel.ubuntu.com/~jsalisbury/lp1773704
Can you test this kernel and see if it resolves this bug?
Note about installing test kernels:
• If the test kernel is prior to 4.15(Bionic) you need to install the
linux-image and linux-image-extra .deb packages.
• If the test kernel is 4.15(Bionic) or newer, you need to install the
linux-modules, linux-modules-extra and linux-image-unsigned .deb packages.
Thanks in advance!
--
You received this bug notification because you are subscribed to the bug
report.
https://bugs.launchpad.net/bugs/1773704
Title:
Typo at line 184 in xhci-pci.c makes trouble for Renesas USB chipset
in Bionic 18.04
Status in linux package in Ubuntu:
In Progress
Status in linux source package in Bionic:
In Progress
Bug description:
A typo at line 184 in /drivers/usb/host/xhci-pci.c trashes a good fix.
183 if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
184 pdev->device == 0x0014)
185 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
186 if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
187 pdev->device == 0x0015)
188 xhci->quirks |= XHCI_RESET_ON_RESUME;
Line 184 should be identical to line 187, ie: should read pdev->device
== 0x0015)
I've compiled the kernel both with and without the typo. As written,
hundreds of messages fill dmesg suggesting XHCI_TRUST_TX_LENGTH may be
needed when zoneminder tries to access my USB webcams. With the fix
applied as I've suggested the messages disappear.
The typo is still present in 4.15.0-22.24
For more background, you may refer to bug ID #1710548
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1773704/+subscriptions
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1773704
Title:
Typo at line 184 in xhci-pci.c makes trouble for Renesas USB chipset
in Bionic 18.04
Status in linux package in Ubuntu:
In Progress
Status in linux source package in Bionic:
In Progress
Bug description:
A typo at line 184 in /drivers/usb/host/xhci-pci.c trashes a good fix.
183 if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
184 pdev->device == 0x0014)
185 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
186 if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
187 pdev->device == 0x0015)
188 xhci->quirks |= XHCI_RESET_ON_RESUME;
Line 184 should be identical to line 187, ie: should read pdev->device
== 0x0015)
I've compiled the kernel both with and without the typo. As written,
hundreds of messages fill dmesg suggesting XHCI_TRUST_TX_LENGTH may be
needed when zoneminder tries to access my USB webcams. With the fix
applied as I've suggested the messages disappear.
The typo is still present in 4.15.0-22.24
For more background, you may refer to bug ID #1710548
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1773704/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
