------- Comment From s...@us.ibm.com 2018-07-23 15:10 EDT------- I'm still looking. I'm confident that daniel has correctly identified and explained the failure mode (i.e. out of enough CMA to create guests). I also don't *think* we have enough information at the moment to say for sure why this particular memory pool is exhausted; however, I'm still poking around to see what information we *do* need.
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1781038 Title: KVM guest hash page table failed to allocate contiguous memory (CMA) Status in The Ubuntu-power-systems project: Triaged Status in linux package in Ubuntu: New Bug description: Per an email forwarded within IBM, we wish to use this Launchpad bug to work on the technical discussion with the Canonical development folks and the IBM KVM and kernel team surrounding the analysis made by Daniel Axtens of Canonical for the customer issue raised in Case #00177825. The only statement at the moment by the KVM team was that there were various issues associated with CMA fragmentation causing issues with KVM guests. However, as mentioned, this bug is to allow the dialog amongst all the developers to see what can be done to help alleviate the situation or understand the root cause further. Please also note that we should not be attaching customer data to this bug. If that is necessary then we expect Canonical to help provide a controlled environment for reviewing that data so we avoid any privacy issues (e.g. for GDPR compliance). Here is the email from Daniel: I have looked at the sosreport you uploaded. Here is my analysis so far. Virtualisation on powerpc has some special requirements. To start a guest on a powerpc host, you need to allocate a contiguous area of memory to hold the guest's hash page table (HPT, or HTAB, depending on which document you look at). The HPT is required to track and manage guest memory. Your error reports show qemu asking the kernel to allocate an HTAB, and the kernel reporting that it had insufficient memory to do so. The required memory for the HPT scales with the guest memory size - it should be about 1/128th of guest memory, so for a 16GB guest, that's 128MB. However, the HPT has to be allocated as a single contiguous memory region. (This is in contrast to regular guest memory, which is not required to be contiguous from the host point of view.) The kernel keeps a special contiguous memory area (CMA) for these purposes, and keeps track of the total amounts in use and still available. These are shown in /proc/meminfo. From the system that ran the sosreport, we see: CmaTotal: 26853376 kB CmaFree: 4024448 kB So there is a total of about 25GB of CMA, of which about 3.8GB remain. This is obviously more than 128MB: - It's very possible that between the error and the sosreport, more contiguous memory became available. This would match the intermittent nature of the issue. - It also might be that the failure was due to fragmentation of memory in the CMA pool. That is, there might be more than 128MB, but it might all be in chunks that are smaller than 128MB, or which don't have the required alignment for a HPT. Given that the system's uptime was 112 days when the sosreport was generated, it would be unsurprising if fragmentation had occurred! (Relatedly - you're running 4.4.0-109, which does not have the Spectre and Meltdown fixes.) This issue has come up before - both in a public Canonical-IBM synchronised bug report[1], and with Red Hat[2]. It appears that there is some work within IBM to address this, but it seems to have stalled. I will get in touch with the IBM powerpc kernel team on their public mailing list and ask about the status. I will keep you updated. In the mean time, I have a potential solution/workaround. By default, 5% of memory is reserved for CMA (kernel source: arch/powerpc/kvm/book3s_hv_builtin.c, kvm_cma_resv_ratio). You can increase this with a boot parameter, so for example to reserve 10%, you could boot with kvm_cma_resv_ratio=10. This can be set in petitboot. This should significantly reduce the incidence of this issue - perhaps eliminating it entirely - at the cost of locking away more of the system's memory. You would need to experiment to determine the optimal value. Perhaps given that you are seeing the problem only intermittently, a ratio of 7% would be sufficient - that would give you ~35GB of CMA. Please let me know if testing this setting would be an option for you. Please also let me know if you require further information on setting boot parameters with Petitboot. Regards, Daniel [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1632045 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1304300 Before we go any further, let's get the basic info here. Apparently there was a sosreport somewhere else, and a link would be good, but, here's what we need here -- at least -- to get started: 1. What is the server model and at least basic config info (I/O cards, firmware level)? Use /proc/meminfo, etc. Attach the syslog and the /var/log/libvirt/qemu logs. 2. What is running on the host (at least uname -a). Sounds like from comment above like it's an older fix level, so let's get it updated to the curent level (and ensure the problem still exists) before proceeding: There is zero point in trying to figure out whether fixes that are known to exist in 16.04 are in this *particular* build level. 3. What is running on the guests? The exact same OS level? Please attach XML (from virsh dumpxml) for each guest running on the system when the failure occurs (and make a note of which one is from the failing guest). If we are 100% sure that, excepting unique IDs & filenames, the XMLs are identical, then don't attach duplicates. 4. Anything else you think we should know. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-power-systems/+bug/1781038/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
