This bug is missing log files that will aid in diagnosing the problem.
While running an Ubuntu kernel (not a mainline or third-party kernel)
please enter the following command in a terminal window:
apport-collect 1789589
and then change the status of the bug to 'Confirmed'.
If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.
This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.
** Changed in: linux (Ubuntu)
Status: New => Incomplete
** Tags added: bionic
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1789589
Title:
USB-SATA resets when UAS is used
Status in linux package in Ubuntu:
Incomplete
Bug description:
Dear developers,
I have a Icybox 4 HDD enclosure with a JMicrom JMS567 SATA to USB converter.
When the device is under load and more than 1 hardrive is acessed, the USB
enclosure frequently restarts. This leaves often a corrup filesystem. I tried
to switch off UAS by creating a file in /etc/modprobe.d/blacklist_uas.conf with
the following content:
options usb-storage quirks=152d:0567:u
This disables UAS, and I did not exerinecs restarts of the box. But of course
thios laves only USB speeds on the USB3 connector, which is quite slow.
I think this suggest this is a kernel bug and not a hardware issues.
I aasume the problem is in the linux-image-4.15.0-33-generic package.
Similar has been reported:
https://www.spinics.net/lists/linux-usb/msg157550.html
Any help would be greatly appreciated.
Best regards
Michael
lsusb -vvv -s 003:004
Bus 003 Device 004: ID 152d:0567 JMicron Technology Corp. / JMicron USA
Technology Corp. JMS567 SATA 6Gb/s bridge
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology
Corp.
idProduct 0x0567 JMS567 SATA 6Gb/s bridge
bcdDevice 2.05
iManufacturer 10
iProduct 11
iSerial 5
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 44
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
res3stockm@brix:~$ lsb_release -rd
Description: Ubuntu 18.04.1 LTS
Release: 18.04
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1789589/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
