I was affected too, system info:
Asus-K43SD:
CPU: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz
GPU: NVIDIA Corporation GF119M [GeForce 610M] (rev a1) - [GeForce
610M/PCIe/SSE2]
OS: 18.04 x64
Test update, works perfectly. Switching between Intel & NVIDIA happens
right after logging out and getting in again. But GDM3 gone crazy(i
guess it's not stable yet) and freezes after few logging in/out.
Thank you for fix
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to nvidia-settings in Ubuntu.
https://bugs.launchpad.net/bugs/1778011
Title:
SRU: PRIME Power Saving mode draws too much power
Status in HWE Next:
New
Status in gdm3 package in Ubuntu:
Fix Released
Status in nvidia-graphics-drivers-390 package in Ubuntu:
Fix Released
Status in nvidia-prime package in Ubuntu:
Fix Released
Status in nvidia-settings package in Ubuntu:
Fix Released
Status in ubuntu-drivers-common package in Ubuntu:
Fix Released
Status in gdm3 source package in Bionic:
Fix Committed
Status in nvidia-graphics-drivers-390 source package in Bionic:
Fix Committed
Status in nvidia-prime source package in Bionic:
Fix Committed
Status in nvidia-settings source package in Bionic:
Fix Committed
Status in ubuntu-drivers-common source package in Bionic:
Fix Committed
Bug description:
SRU Request:
[Impact]
Relying on the nouveau driver and on the vga switcheroo (to get around a
change in systemd LP: #1777099) caused increased power consumption, and slowed
down the switching process.
Furthermore, if the main X/Xwayland session was started by Gdm when
the nvidia driver was loaded, the session will keep the nvidia module
loaded, and prevent the system from switching off the dGPU. Also, the
nouveau driver will be loaded, if nvidia is not, and this can cause
problems to unsupported NVIDIA GPUs.
The solution involves the following changes:
1) Solving the problem in systemd (LP: #1777099)
2) Adding code in gpu-manager and in nvidia-prime to unload the nvidia
modules, and to allow the PCI device to sleep.
3) Making a slight change to the current patch in Gdm, used to call
the PRIME scripts before and after a Gdm session (so that gpu-manager
gets actually called on log out)
4) Adding code in gpu-manager to kill the main X/Xwayland session on
log out, if the session is preventing us from unloading the nvidia
driver. A new X/Xwayland session will be created after unload the
module.
5) Removing the systemd service that loads nouveau from the nvidia
packages.
[Test Case]
1) Enable the -proposed repository, and install the new
"ubuntu-drivers-common", nvidia drivers, nvidia-prime, and gdm3 *
2) Make sure the nvidia packages are installed, and enable performance mode
(if it is already enabled, call "sudo prime-select intel" first):
sudo prime-select nvidia
3) Restart your computer and attach your /var/log/gpu-manager.log. see
if the system boots correctly. If unsure, please attach your /var/log
/gpu-manager.log and /var/log/Xorg.0.log
4) Select power saving mode:
sudo prime-select intel
5) Log out and log back in
6) Check if the nvidia driver is still loaded:
lsmod | grep nvidia
[Regression Potential]
Low, as hybrid graphics support does not work correctly, and the changes only
affect this use case.
_____________________________________
* Steps to test the updates:
1) Enable the bionic-proposed repositories
2) Create /etc/apt/preferences.d/proposed-updates with the following
content:
Package: *
Pin: release a=bionic-proposed
Pin-Priority: 400
3) Update the list of packages:
sudo apt-get update
4) Install the packages from -proposed using the following command:
sudo apt install nvidia-driver-390/bionic-proposed gdm3/bionic-
proposed ubuntu-drivers-common/bionic-proposed nvidia-prime/bionic-
proposed nvidia-settings/bionic-proposed libnvidia-gl-390/bionic-
proposed libnvidia-compute-390/bionic-proposed libnvidia-decode-390
/bionic-proposed libnvidia-encode-390/bionic-proposed libnvidia-
ifr1-390/bionic-proposed libnvidia-fbc1-390/bionic-proposed
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1778011/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
