This bug was fixed in the package linux-oem-osp1 - 5.0.0-1012.13
---------------
linux-oem-osp1 (5.0.0-1012.13) bionic; urgency=medium
* linux-oem-osp1: 5.0.0-1012.13 -proposed tracker (LP: #1833932)
* Add DMIC support to oem-kernel (LP: #1826181)
- ASoC: SOF: Intel: hda: reduce ifdef usage for hda
- ASoC: SOF: Intel: hda: Enable jack detection in sof hda driver
- Revert "ASoC: SOF: Intel: hda: switch to use legacy IRQ mode"
- ASoC: SOF: Intel: hda: modify stream interrupt handler
- ASoC: SOF: Intel: fix warning for unused variable in non-HDA builds
- ASoC: hdac_hdmi: report codec link up/down status to bus
- ASoC: SOF: add runtime idle callback
- ASoC: SOF: Intel: implement runtime idle for CNL/APL
- ASoC: SOF: dont wake dsp up in kcontrol IO
- ASoC: codec: hdac_hdmi: fix pin connections at cvt enable
- ALSA: hda: fix headphone detection failed
* [SRU][B/B-OEM/B-OEM-OSP-1/C/D/E] Add trackpoint middle button support of 2
new thinpads (LP: #1833637)
- Input: elantech - enable middle button support on 2 ThinkPads
* [graphics] Enable ICL (LP: #1825940)
- drm/i915/icl: Add WaDisableBankHangMode
- drm/i915/icl: Adding few more device IDs for Ice Lake
- drm/i915/cfl: Adding another PCI Device ID.
- drm/i915: Accept alloc_size == blocks
- drm/i915: Don't pass plane state to skl_compute_plane_wm()
- drm/i915: Extract skl_compute_wm_params()
- drm/i915: Allocate enough DDB for the cursor
- drm/i915: Make sure cursor has enough ddb for the selected wm level
- drm/i915: Keep plane watermarks enabled more aggressively
- drm/i915: Move some variables to tighter scope
- drm/i915: Don't pass pipe_wm around so much
- drm/i915: Inline skl_update_pipe_wm() into its only caller
- drm/i915: Fix PSR2 selective update corruption after PSR1 setup
- drm/i915: Populate pipe_offsets[] & co. accurately
- drm/i915: Extract ilk_lut_10()
- drm/i915: Don't use split gamma when we don't have to
- drm/i915: Implement split/10bit gamma for ivb/hsw
- drm/i915: Add 10bit LUT for ilk/snb
- drm/i915: Add "10.6" LUT mode for i965+
- drm/i915: Expose the legacy LUT via the GAMMA_LUT/GAMMA_LUT_SIZE props on
gen2/3
- drm/i915: Expose full 1024 LUT entries on ivb+
- drm/i915: Introduce struct class_instance for engines across the uAPI
- drm/i915: Fix skl+ max plane width
- drm/i915: Rename skl_wa_clkgating to the actual WA
- drm/i915: Fix the inconsistent RMW in WA 827
- drm/i915/icl: Fix clockgating issue when using scalers
- drm/i915: Always try to reset the GPU on takeover
- drm/i915: Add Wa_1409120013:icl,ehl
- drm/i915/icl: use ranges for voltage level lookup
- drm/i915/cnl: use ranges for voltage level lookup
- drm/i915/skl: use ranges for voltage level lookup
* Sometimes touchpad automatically trigger double click (LP: #1833484)
- SAUCE: i2c: designware: Add disable runtime pm quirk
* Add pointstick support on HP ZBook 17 G5 (LP: #1833387)
- Revert "HID: multitouch: Support ALPS PTP stick with pid 0x120A"
- SAUCE: HID: multitouch: Add pointstick support for ALPS Touchpad
* Dell XPS 13 (9370) defaults to s2idle sleep/suspend instead of deep, NVMe
drains lots of power under s2idle (LP: #1808957)
- Revert "UBUNTU: SAUCE: pci/nvme: prevent WDC PC SN720 NVMe from entering
D3
and being disabled"
- Revert "UBUNTU: SAUCE: nvme: add quirk to not call disable function when
suspending"
- Revert "UBUTU: SAUCE: pci: prevent Intel NVMe SSDPEKKF from entering D3"
- Revert "UBUNTU: SAUCE: nvme: add quirk to not call disable function when
suspending"
- Revert "UBUNTU: SAUCE: pci: prevent sk hynix nvme from entering D3"
- PCI: PM: Avoid possible suspend-to-idle issue
- SAUCE: PCI: PM: Skip devices in D0 for suspend-to-idle
- nvme-pci: Sync queues on reset
- nvme: Export get and set features
- nvme-pci: Use host managed power state for suspend
* Intel WiFi (CNVi) module has no function on Comet Lake [8086:02f0]
(LP: #1833065)
- iwlwifi: add support for 6-7 GHz channels
- iwlwifi: support new NVM response API
- iwlwifi: for AX210 device support radio GF4
- iwlwifi: bump FW API to 47 for 22000 series
- iwlwifi: remove unused 0x40C0 PCI device IDs
- iwlwifi: bump FW API to 48 for 22000 series
- iwlwifi: bump FW API to 49 for 22000 series
- iwlwifi: add new cards for 22000 and fix struct name
- iwlwifi: bump FW API to 50 for 22000 series
- iwlwifi: add new cards for 22000 and change wrong structs
- iwlwifi: change 0x02F0 fw from qu to quz
[ Ubuntu: 5.0.0-20.21 ]
* linux: 5.0.0-20.21 -proposed tracker (LP: #1833934)
* CVE-2019-11479
- SAUCE: tcp: add tcp_min_snd_mss sysctl
- SAUCE: tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
* Remote denial of service (resource exhaustion) caused by TCP SACK scoreboard
manipulation (LP: #1831638) // CVE-2019-11478
- tcp: refine memory limit test in tcp_fragment()
[ Ubuntu: 5.0.0-19.20 ]
* CVE-2019-12817
- SAUCE: powerpc/mm/64s/hash: Reallocate context ids on fork
-- Timo Aaltonen <timo.aalto...@canonical.com> Tue, 25 Jun 2019
13:50:17 +0300
** Changed in: linux-oem-osp1 (Ubuntu Bionic)
Status: Fix Committed => Fix Released
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2019-11478
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2019-11479
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2019-12817
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1833484
Title:
Sometimes touchpad automatically trigger double click
Status in HWE Next:
New
Status in linux package in Ubuntu:
Fix Committed
Status in linux-oem-osp1 package in Ubuntu:
Invalid
Status in linux source package in Bionic:
New
Status in linux-oem-osp1 source package in Bionic:
Fix Released
Status in linux source package in Disco:
Fix Committed
Status in linux-oem-osp1 source package in Disco:
New
Bug description:
[Impact]
Dell machines which uses goodix touchpad IC emit double click event
while touching the touchpad if designware i2c adapter is in runtime
suspend.
Goodix re-assert the interrupt if host doesn't read the data within
100ms and designware takes a longer time to wake up from runtime
suspend. In the case, it got a second interrupt during resuming, so
it thinks it's a double click.
[Fix]
There is no simple way to fix this, it's a firmware issue and goodix
agrees to fix this in their firmware on next release, but this issue is
still affects the machines that don't come with an updated firmware. So,
add a quirk to mark those machines and avoid the designware from entering
runtime suspend.
[Regression Potential]
Low, it only affects the listed machines, and prevent designware from
entering runtime suspend impacts the power consumption little or none
during short or long idle.
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1833484/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
