StefanF, I took care of attaching these to the upstream report (https://bugzilla.kernel.org/show_bug.cgi?id=59311). Thanks a lot for collecting them. I apologize that I haven't had time to make progress on this issue.
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.722227] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 0000:04:00.0: PME# enabled [ 447.384258] tg3 0000:04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 0000:04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 0000:04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 0000:04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 0000:04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 0000:04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: **** List of CAPTURE Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F.... pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc0600000 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,00100000' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware 1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: Acer dmi.bios.version: V1.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Mimic dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V1.02 dmi.modalias: dmi:bvnAcer:bvrV1.02:bd04/26/2012:svnAcer:pnAO756:pvrV1.02:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV1.02: dmi.product.name: AO756 dmi.product.version: V1.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1178131/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
