This bug is missing log files that will aid in diagnosing the problem.
While running an Ubuntu kernel (not a mainline or third-party kernel)
please enter the following command in a terminal window:
apport-collect 1843790
and then change the status of the bug to 'Confirmed'.
If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.
This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.
** Changed in: linux (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1843790
Title:
[Thunderbolt][CML-U/S] After freeze sleep finished more than 30s,
lspci trigger tbt in D0, "TX ring 0 is already enabled" Call Trace
generated and then failed to send driver ready to ICM
Status in intel:
New
Status in linux package in Ubuntu:
Incomplete
Bug description:
Description
Platform: CML-U (CML-S no need TR AIC)
TR AIC: rev41
Linux kernel: 5.3.0-rc1
No TBT device connected.
Executed freeze sleep successfully, after freeze exit more than 30s,
cat /sys/bus/thunderbolt/devices/domain0/boot_acl and lspci to
trigger TBT root port in D0.
Then "TX ring 0 is already enabled" Call Trace generated, then failed
to send driver ready to ICM.
Thunderbolt driver was down.
[ 263.903342] LTP: starting TBT_XS_FUNC_RTD3_freeze_test (tbt_rtd3.sh -c 0 -s
rtd3_host_freeze)
[ 264.010613] PM: suspend entry (s2idle)
[ 286.868539] PM: suspend exit
[ 313.202856] thunderbolt 0000:03:00.0: stopping RX ring 0
[ 313.204135] thunderbolt 0000:03:00.0: disabling interrupt at register
0x38200 bit 12 (0x1001 -> 0x1)
[ 313.205565] thunderbolt 0000:03:00.0: stopping TX ring 0
[ 313.206842] thunderbolt 0000:03:00.0: disabling interrupt at register
0x38200 bit 0 (0x1 -> 0x0)
[ 313.208018] thunderbolt 0000:03:00.0: control channel stopped
[ 321.432230] pcieport 0000:02:01.0: pciehp: Slot(1): Link Up
[ 321.433559] pcieport 0000:02:04.0: pciehp: Slot(4-1): Link Up
[ 322.550092] xhci_hcd 0000:39:00.0: Refused to change power state, currently
in D3
[ 322.671084] thunderbolt 0000:03:00.0: control channel starting...
[ 322.672343] thunderbolt 0000:03:00.0: starting TX ring 0
[ 322.673601] thunderbolt 0000:03:00.0: enabling interrupt at register
0x38200 bit 0 (0xffffffff -> 0xffffffff)
[ 322.674912] -----------[ cut here ]-----------
[ 322.676173] thunderbolt 0000:03:00.0: interrupt for TX ring 0 is already
enabled
[ 322.706970] Call Trace:
[ 322.708542] tb_ring_start+0x110/0x1a0 [thunderbolt]
[ 322.710166] tb_ctl_start+0x36/0xc0 [thunderbolt]
[ 322.711762] ? pci_restore_standard_config+0x50/0x50
[ 322.713333] ? pci_restore_standard_config+0x50/0x50
[ 322.748162] thunderbolt 0000:03:00.0: interrupt for RX ring 0 is already
enabled
[ 322.788047] ? pci_restore_standard_config+0x50/0x50
[ 322.789901] ? pci_restore_standard_config+0x50/0x50
[ 404.405929] thunderbolt 0000:03:00.0: failed to send driver ready to ICM
[ 405.596681] LTP: starting TBT_XS_FUNC_RTD3_S3_test (tbt_rtd3.sh -c 0 -s
rtd3_host_s3)
Target Release: 20.04
Target Kernel: TBD
To manage notifications about this bug go to:
https://bugs.launchpad.net/intel/+bug/1843790/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
