These are my dmesg and alsa-base.conf
dmesg:
[ 0.000000] microcode: microcode updated early to revision 0x38, date = 2019-
01-15
[ 0.000000] Linux version 5.3.0-46-generic (buildd@lgw01-amd64-003) (gcc vers
ion 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #38-Ubuntu SMP Fri Mar 27 17:37:05 U
TC 2020 (Ubuntu 5.3.0-46.38-generic 5.3.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID
=6648ead1-09e3-461e-a036-5cb58e11ab8b ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point regi
sters'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes,
using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000067b4ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067b50000-0x0000000067b50fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000067b51000-0x0000000067b6afff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000067b6b000-0x0000000067ba6fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067ba7000-0x0000000068ba6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000068ba7000-0x000000007822efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007822f000-0x000000007aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007afbf000-0x000000007affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007afff000-0x000000007affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: LENOVO 80XR/LNVNB161216, BIOS 5RCN30WW 10/23/2017
[ 0.000000] tsc: Detected 1094.400 MHz processor
[ 0.005258] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.005263] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.005284] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.005292] MTRR default type: uncachable
[ 0.005294] MTRR fixed ranges enabled:
[ 0.005298] 00000-9FFFF write-back
[ 0.005300] A0000-BFFFF uncachable
[ 0.005303] C0000-FFFFF write-protect
[ 0.005305] MTRR variable ranges enabled:
[ 0.005309] 0 base 0000000000 mask 7F80000000 write-back
[ 0.005312] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.005315] 2 base 007B000000 mask 7FFF000000 uncachable
[ 0.005318] 3 base 0100000000 mask 7F80000000 write-back
[ 0.005321] 4 base 00FFC00000 mask 70FFC00000 write-combining
[ 0.005323] 5 disabled
[ 0.005325] 6 disabled
[ 0.005326] 7 disabled
[ 0.005328] 8 disabled
[ 0.005329] 9 disabled
[ 0.005441] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.005538] last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[ 0.015545] check: Scanning 1 areas for low memory corruption
[ 0.015556] Using GB pages for direct mapping
[ 0.015562] BRK [0x140e01000, 0x140e01fff] PGTABLE
[ 0.015567] BRK [0x140e02000, 0x140e02fff] PGTABLE
[ 0.015570] BRK [0x140e03000, 0x140e03fff] PGTABLE
[ 0.015694] BRK [0x140e04000, 0x140e04fff] PGTABLE
[ 0.015997] BRK [0x140e05000, 0x140e05fff] PGTABLE
[ 0.016094] BRK [0x140e06000, 0x140e06fff] PGTABLE
[ 0.016196] BRK [0x140e07000, 0x140e07fff] PGTABLE
[ 0.016476] BRK [0x140e08000, 0x140e08fff] PGTABLE
[ 0.016629] BRK [0x140e09000, 0x140e09fff] PGTABLE
[ 0.016872] BRK [0x140e0a000, 0x140e0afff] PGTABLE
[ 0.017007] RAMDISK: [mem 0x32493000-0x35240fff]
[ 0.017031] ACPI: Early table checksum verification disabled
[ 0.017040] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.017049] ACPI: XSDT 0x000000007AFDF188 0000CC (v01 LENOVO CB-01 0000000
1 01000013)
[ 0.017063] ACPI: FACP 0x000000007AFF6000 000114 (v06 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017077] ACPI: DSDT 0x000000007AFE9000 007E78 (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017086] ACPI: FACS 0x000000007AFB0000 000040
[ 0.017093] ACPI: FACS 0x000000007AFB0000 000040
[ 0.017099] ACPI: UEFI 0x000000007AFFD000 000236 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017108] ACPI: POAT 0x000000007AFFC000 000055 (v03 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017116] ACPI: BDAT 0x000000007AFFB000 000030 (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017124] ACPI: UEFI 0x000000007AFFA000 000042 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017132] ACPI: DBG2 0x000000007AFF9000 000072 (v00 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017140] ACPI: DBGP 0x000000007AFF8000 000034 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017148] ACPI: HPET 0x000000007AFF5000 000038 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017156] ACPI: LPIT 0x000000007AFF4000 00005C (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017164] ACPI: APIC 0x000000007AFF3000 000084 (v03 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017172] ACPI: MCFG 0x000000007AFF2000 00003C (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017180] ACPI: NPKT 0x000000007AFF1000 000065 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017188] ACPI: SSDT 0x000000007AFE8000 0002AF (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017196] ACPI: SSDT 0x000000007AFE7000 0003DF (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017204] ACPI: SSDT 0x000000007AFE6000 00072B (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017212] ACPI: SSDT 0x000000007AFE5000 00032D (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017220] ACPI: SSDT 0x000000007AFE4000 00017C (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017228] ACPI: SSDT 0x000000007AFE1000 002701 (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017236] ACPI: FPDT 0x000000007AFE0000 000034 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017245] ACPI: WDAT 0x000000007AFF7000 000104 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017252] ACPI: NHLT 0x000000007AFDE000 00002D (v00 LENOVO CB-01 0000000
1 01000013)
[ 0.017274] ACPI: Local APIC address 0xfee00000
[ 0.017585] No NUMA configuration found
[ 0.017589] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.017617] NODE_DATA(0) allocated [mem 0x17ffd5000-0x17fffffff]
[ 0.018441] Zone ranges:
[ 0.018443] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018447] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.018450] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.018453] Device empty
[ 0.018455] Movable zone start for each node
[ 0.018463] Early memory node ranges
[ 0.018466] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.018468] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.018471] node 0: [mem 0x0000000012151000-0x0000000067b4ffff]
[ 0.018473] node 0: [mem 0x0000000067b6b000-0x0000000067ba6fff]
[ 0.018475] node 0: [mem 0x0000000068ba7000-0x000000007822efff]
[ 0.018477] node 0: [mem 0x000000007afff000-0x000000007affffff]
[ 0.018480] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.019567] Zeroed struct page in unavailable ranges: 44959 pages
[ 0.019571] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.019576] On node 0 totalpages: 1003617
[ 0.019579] DMA zone: 64 pages used for memmap
[ 0.019581] DMA zone: 21 pages reserved
[ 0.019584] DMA zone: 3997 pages, LIFO batch:0
[ 0.019763] DMA32 zone: 7428 pages used for memmap
[ 0.019765] DMA32 zone: 475332 pages, LIFO batch:63
[ 0.050800] Normal zone: 8192 pages used for memmap
[ 0.050803] Normal zone: 524288 pages, LIFO batch:63
[ 0.073093] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.073381] ACPI: PM-Timer IO Port: 0x408
[ 0.073386] ACPI: Local APIC address 0xfee00000
[ 0.073403] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.073406] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.073408] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.073410] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.073448] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.073454] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.073458] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.073461] ACPI: IRQ0 used by override.
[ 0.073464] ACPI: IRQ9 used by override.
[ 0.073468] Using ACPI (MADT) for SMP configuration information
[ 0.073472] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.073484] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.073553] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.073558] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.073560] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.073562] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.073564] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.073569] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.073574] PM: Registered nosave memory: [mem 0x67b50000-0x67b50fff]
[ 0.073576] PM: Registered nosave memory: [mem 0x67b51000-0x67b6afff]
[ 0.073581] PM: Registered nosave memory: [mem 0x67ba7000-0x68ba6fff]
[ 0.073586] PM: Registered nosave memory: [mem 0x7822f000-0x7aebefff]
[ 0.073588] PM: Registered nosave memory: [mem 0x7aebf000-0x7afbefff]
[ 0.073589] PM: Registered nosave memory: [mem 0x7afbf000-0x7affefff]
[ 0.073595] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[ 0.073596] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[ 0.073598] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[ 0.073600] PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
[ 0.073602] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[ 0.073604] PM: Registered nosave memory: [mem 0xe4000000-0xfe041fff]
[ 0.073606] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[ 0.073607] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[ 0.073609] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[ 0.073611] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[ 0.073613] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.073615] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.073617] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.073618] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[ 0.073620] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.073622] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.073624] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.073629] [mem 0x80000000-0xcfffffff] available for PCI devices
[ 0.073631] Booting paravirtualized kernel on bare hardware
[ 0.073639] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff
ffff, max_idle_ns: 7645519600211568 ns
[ 0.073658] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node
_ids:1
[ 0.074505] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.074531] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.074533] pcpu-alloc: [0] 0 1 2 3
[ 0.074632] Built 1 zonelists, mobility grouping on. Total pages: 987912
[ 0.074635] Policy zone: Normal
[ 0.074639] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic ro
ot=UUID=6648ead1-09e3-461e-a036-5cb58e11ab8b ro quiet splash vt.handoff=7
[ 0.075950] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes
, linear)
[ 0.076536] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes,
linear)
[ 0.076639] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.095529] Calgary: detecting Calgary via BIOS EBDA area
[ 0.095533] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.126585] Memory: 3795900K/4014468K available (14339K kernel code, 2387K rw
data, 4724K rodata, 2676K init, 5044K bss, 218568K reserved, 0K cma-reserved)
[ 0.127147] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.127186] ftrace: allocating 43582 entries in 171 pages
[ 0.167009] rcu: Hierarchical RCU implementation.
[ 0.167014] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.167016] Tasks RCU enabled.
[ 0.167019] rcu: RCU calculated value of scheduler-enlistment delay is 25 jif
fies.
[ 0.167021] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.177464] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.178089] random: crng done (trusting CPU's manufacturer)
[ 0.178168] vt handoff: transparent VT on vt#7
[ 0.178192] Console: colour dummy device 80x25
[ 0.178202] printk: console [tty0] enabled
[ 0.178258] ACPI: Core revision 20190703
[ 0.178754] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i
dle_ns: 99544814920 ns
[ 0.178857] APIC: Switch to symmetric I/O mode setup
[ 0.180173] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.185052] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.202820] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc
66f4fc7c, max_idle_ns: 440795224246 ns
[ 0.202832] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 2188.80 BogoMIPS (lpj=4377600)
[ 0.202838] pid_max: default: 32768 minimum: 301
[ 0.202978] LSM: Security Framework initializing
[ 0.203015] Yama: becoming mindful.
[ 0.203103] AppArmor: AppArmor initialized
[ 0.203228] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, line
ar)
[ 0.203249] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes,
linear)
[ 0.203735] *** VALIDATE proc ***
[ 0.203894] *** VALIDATE cgroup1 ***
[ 0.203898] *** VALIDATE cgroup2 ***
[ 0.204087] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.204181] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.204183] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.204194] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user poin
ter sanitization
[ 0.204198] Spectre V2 : Mitigation: Full generic retpoline
[ 0.204200] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on c
ontext switch
[ 0.204201] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.204205] Spectre V2 : mitigation: Enabling conditional Indirect Branch Pre
diction Barrier
[ 0.204716] Freeing SMP alternatives memory: 36K
[ 0.209949] TSC deadline timer enabled
[ 0.209960] smpboot: CPU0: Intel(R) Celeron(R) CPU N3350 @ 1.10GHz (family: 0
x6, model: 0x5c, stepping: 0x9)
[ 0.210429] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, ful
l-width counters, Intel PMU driver.
[ 0.210444] ... version: 4
[ 0.210445] ... bit width: 48
[ 0.210447] ... generic registers: 4
[ 0.210449] ... value mask: 0000ffffffffffff
[ 0.210450] ... max period: 00007fffffffffff
[ 0.210452] ... fixed-purpose events: 3
[ 0.210453] ... event mask: 000000070000000f
[ 0.210567] rcu: Hierarchical SRCU implementation.
[ 0.210825] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.210825] smp: Bringing up secondary CPUs ...
[ 0.210825] x86: Booting SMP configuration:
[ 0.210825] .... node #0, CPUs: #1
[ 0.215191] smp: Brought up 1 node, 2 CPUs
[ 0.215191] smpboot: Max logical packages: 2
[ 0.215191] smpboot: Total of 2 processors activated (4377.60 BogoMIPS)
[ 0.215601] devtmpfs: initialized
[ 0.215601] x86/mm: Memory block size: 128MB
[ 0.216458] PM: Registering ACPI NVS region [mem 0x67b50000-0x67b50fff] (4096
bytes)
[ 0.216458] PM: Registering ACPI NVS region [mem 0x67ba7000-0x68ba6fff] (1677
7216 bytes)
[ 0.218975] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7afbefff] (1048
576 bytes)
[ 0.219217] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 7645041785100000 ns
[ 0.219217] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.219217] pinctrl core: initialized pinctrl subsystem
[ 0.219436] PM: RTC time: 15:36:52, date: 2020-04-21
[ 0.219880] NET: Registered protocol family 16
[ 0.220150] audit: initializing netlink subsys (disabled)
[ 0.220231] audit: type=2000 audit(1587483412.040:1): state=initialized audit
_enabled=0 res=1
[ 0.220231] EISA bus registered
[ 0.220231] cpuidle: using governor ladder
[ 0.220231] cpuidle: using governor menu
[ 0.220231] ACPI: bus type PCI registered
[ 0.220231] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.220231] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3
ffffff] (base 0xe0000000)
[ 0.220231] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.220231] PCI: Using configuration type 1 for base access
[ 0.220231] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.220231] mtrr: probably your BIOS does not setup all CPUs.
[ 0.220231] mtrr: corrected configuration.
[ 0.226087] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.226087] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.235115] ACPI: Added _OSI(Module Device)
[ 0.235118] ACPI: Added _OSI(Processor Device)
[ 0.235120] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.235122] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.235125] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.235127] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.235130] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.260867] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.268563] ACPI: Dynamic OEM Table Load:
[ 0.268582] ACPI: SSDT 0xFFFF8F637A8B9000 000102 (v02 PmRef Cpu0Cst 0000300
1 INTL 20121220)
[ 0.271755] ACPI: Dynamic OEM Table Load:
[ 0.271771] ACPI: SSDT 0xFFFF8F637A8B9200 00015F (v02 PmRef ApIst 0000300
0 INTL 20121220)
[ 0.274130] ACPI: Dynamic OEM Table Load:
[ 0.274145] ACPI: SSDT 0xFFFF8F637B325E40 00008D (v02 PmRef ApCst 0000300
0 INTL 20121220)
[ 0.277091] ACPI: EC: EC started
[ 0.277094] ACPI: EC: interrupt blocked
[ 0.280558] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.280563] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=
0x62
[ 0.280567] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transacti
ons
[ 0.280568] ACPI: Interpreter enabled
[ 0.280641] ACPI: (supports S0 S3 S4 S5)
[ 0.280644] ACPI: Using IOAPIC for interrupt routing
[ 0.280749] PCI: Using host bridge windows from ACPI; if necessary, use "pci=
nocrs" and report a bug
[ 0.281724] ACPI: Enabled 9 GPEs in block 00 to 7F
[ 0.309935] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.309952] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S
egments MSI HPX-Type3]
[ 0.313160] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug P
ME AER PCIeCapability LTR]
[ 0.313203] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 0
0-3f] only partially covers this bridge
[ 0.315754] PCI host bridge to bus 0000:00
[ 0.315760] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.315770] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.315773] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.315777] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.315781] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win
dow]
[ 0.315784] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff win
dow]
[ 0.315787] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff win
dow]
[ 0.315791] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff win
dow]
[ 0.315794] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff win
dow]
[ 0.315798] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff win
dow]
[ 0.315801] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff win
dow]
[ 0.315806] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.315836] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[ 0.316741] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
[ 0.316770] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 0.316784] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref
]
[ 0.316795] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.317742] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040380
[ 0.317786] pci 0000:00:0e.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[ 0.317831] pci 0000:00:0e.0: reg 0x20: [mem 0x91100000-0x911fffff 64bit]
[ 0.317937] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.318858] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[ 0.318912] pci 0000:00:0f.0: reg 0x10: [mem 0x91416000-0x91416fff 64bit]
[ 0.319073] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.319840] pci 0000:00:0f.1: [8086:5a9c] type 00 class 0x078000
[ 0.319894] pci 0000:00:0f.1: reg 0x10: [mem 0x91417000-0x91417fff 64bit]
[ 0.320052] pci 0000:00:0f.1: PME# supported from D3hot
[ 0.320819] pci 0000:00:0f.2: [8086:5a9e] type 00 class 0x078000
[ 0.320873] pci 0000:00:0f.2: reg 0x10: [mem 0x91418000-0x91418fff 64bit]
[ 0.321033] pci 0000:00:0f.2: PME# supported from D3hot
[ 0.321814] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[ 0.321845] pci 0000:00:12.0: reg 0x10: [mem 0x91414000-0x91415fff]
[ 0.321857] pci 0000:00:12.0: reg 0x14: [mem 0x9141d000-0x9141d0ff]
[ 0.321870] pci 0000:00:12.0: reg 0x18: [io 0x3080-0x3087]
[ 0.321882] pci 0000:00:12.0: reg 0x1c: [io 0x3088-0x308b]
[ 0.321894] pci 0000:00:12.0: reg 0x20: [io 0x3060-0x307f]
[ 0.321905] pci 0000:00:12.0: reg 0x24: [mem 0x9141b000-0x9141b7ff]
[ 0.321974] pci 0000:00:12.0: PME# supported from D3hot
[ 0.322758] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
[ 0.322929] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.323752] pci 0000:00:14.0: [8086:5ad6] type 01 class 0x060400
[ 0.323879] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[ 0.324659] pci 0000:00:14.1: [8086:5ad7] type 01 class 0x060400
[ 0.324785] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[ 0.325590] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[ 0.325629] pci 0000:00:15.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[ 0.325726] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.326532] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000
[ 0.326576] pci 0000:00:17.0: reg 0x10: [mem 0x91419000-0x91419fff 64bit]
[ 0.326593] pci 0000:00:17.0: reg 0x18: [mem 0x9141a000-0x9141afff 64bit]
[ 0.327496] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[ 0.328411] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[ 0.328486] pci 0000:00:1f.1: reg 0x10: [mem 0x9141c000-0x9141c0ff 64bit]
[ 0.328569] pci 0000:00:1f.1: reg 0x20: [io 0x3040-0x305f]
[ 0.329539] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.329726] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.329796] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.329852] pci 0000:02:00.0: reg 0x18: [mem 0x91300000-0x91300fff 64bit]
[ 0.329888] pci 0000:02:00.0: reg 0x20: [mem 0x91000000-0x91003fff 64bit pref
]
[ 0.329936] pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (
was 256, max 256)
[ 0.329950] pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 0.330181] pci 0000:02:00.0: supports D1 D2
[ 0.330184] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330512] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.330519] pci 0000:00:14.0: bridge window [io 0x2000-0x2fff]
[ 0.330525] pci 0000:00:14.0: bridge window [mem 0x91300000-0x913fffff]
[ 0.330534] pci 0000:00:14.0: bridge window [mem 0x91000000-0x910fffff 64bi
t pref]
[ 0.330677] pci 0000:03:00.0: [10ec:8821] type 00 class 0x028000
[ 0.330742] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.330803] pci 0000:03:00.0: reg 0x18: [mem 0x91200000-0x91203fff 64bit]
[ 0.330888] pci 0000:03:00.0: Upstream bridge's Max Payload Size set to 128 (
was 256, max 256)
[ 0.330898] pci 0000:03:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 0.331049] pci 0000:03:00.0: supports D1 D2
[ 0.331053] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.331355] pci 0000:00:14.1: PCI bridge to [bus 03]
[ 0.331362] pci 0000:00:14.1: bridge window [io 0x1000-0x1fff]
[ 0.331368] pci 0000:00:14.1: bridge window [mem 0x91200000-0x912fffff]
[ 0.333834] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.334110] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.334382] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.334655] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.334933] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.335208] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.335480] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.335750] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.337535] ACPI: EC: interrupt unblocked
[ 0.337599] ACPI: EC: event unblocked
[ 0.337632] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=
0x62
[ 0.337636] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transacti
ons and events
[ 0.337942] SCSI subsystem initialized
[ 0.338857] libata version 3.00 loaded.
[ 0.338949] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.338954] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=i
o+mem,locks=none
[ 0.338966] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.338967] vgaarb: loaded
[ 0.339027] ACPI: bus type USB registered
[ 0.339064] usbcore: registered new interface driver usbfs
[ 0.339064] usbcore: registered new interface driver hub
[ 0.339064] usbcore: registered new device driver usb
[ 0.339064] pps_core: LinuxPPS API ver. 1 registered
[ 0.339064] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti <giome...@linux.it>
[ 0.339064] PTP clock support registered
[ 0.339092] EDAC MC: Ver: 3.0.0
[ 0.339092] PCI: Using ACPI for IRQ routing
[ 0.346429] PCI: pci_cache_line_size set to 64 bytes
[ 0.346554] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.346558] e820: reserve RAM buffer [mem 0x67b50000-0x67ffffff]
[ 0.346560] e820: reserve RAM buffer [mem 0x67ba7000-0x67ffffff]
[ 0.346562] e820: reserve RAM buffer [mem 0x7822f000-0x7bffffff]
[ 0.346565] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 0.346846] NetLabel: Initializing
[ 0.346848] NetLabel: domain hash size = 128
[ 0.346850] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.346886] NetLabel: unlabeled traffic allowed by default
[ 0.348961] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.348974] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.350896] clocksource: Switched to clocksource tsc-early
[ 0.390448] VFS: Disk quotas dquot_6.6.0
[ 0.390493] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.390570] *** VALIDATE hugetlbfs ***
[ 0.390850] AppArmor: AppArmor Filesystem Enabled
[ 0.390925] pnp: PnP ACPI init
[ 0.392905] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000
:00:14.1 BAR 13 [io 0x1000-0x1fff]
[ 0.392999] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.393005] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.393009] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.393013] system 00:00: [io 0x0600-0x061f] has been reserved
[ 0.393029] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.393155] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.393786] system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.393791] system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.393796] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.393800] system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.393804] system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.393808] system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.393812] system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.393816] system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.393821] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.393834] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.394737] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.395069] pnp: PnP ACPI: found 4 devices
[ 0.399976] thermal_sys: Registered thermal governor 'fair_share'
[ 0.399979] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.399982] thermal_sys: Registered thermal governor 'step_wise'
[ 0.399983] thermal_sys: Registered thermal governor 'user_space'
[ 0.399985] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.404493] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id
le_ns: 2085701024 ns
[ 0.404620] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.404645] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.404652] pci 0000:00:14.0: bridge window [io 0x2000-0x2fff]
[ 0.404659] pci 0000:00:14.0: bridge window [mem 0x91300000-0x913fffff]
[ 0.404665] pci 0000:00:14.0: bridge window [mem 0x91000000-0x910fffff 64bi
t pref]
[ 0.404673] pci 0000:00:14.1: PCI bridge to [bus 03]
[ 0.404678] pci 0000:00:14.1: bridge window [io 0x1000-0x1fff]
[ 0.404685] pci 0000:00:14.1: bridge window [mem 0x91200000-0x912fffff]
[ 0.404698] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.404702] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.404705] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.404709] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.404712] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.404716] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.404719] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.404723] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[ 0.404726] pci_bus 0000:00: resource 12 [mem 0x7b800001-0x7bffffff window]
[ 0.404730] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
[ 0.404733] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
[ 0.404738] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.404741] pci_bus 0000:02: resource 1 [mem 0x91300000-0x913fffff]
[ 0.404744] pci_bus 0000:02: resource 2 [mem 0x91000000-0x910fffff 64bit pref
]
[ 0.404748] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.404751] pci_bus 0000:03: resource 1 [mem 0x91200000-0x912fffff]
[ 0.405114] NET: Registered protocol family 2
[ 0.405520] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 3276
8 bytes, linear)
[ 0.405621] TCP established hash table entries: 32768 (order: 6, 262144 bytes
, linear)
[ 0.405977] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linea
r)
[ 0.406327] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.406456] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.406542] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.406904] NET: Registered protocol family 1
[ 0.406919] NET: Registered protocol family 44
[ 0.406950] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c00
00-0x000dffff]
[ 1.569461] pci 0000:00:15.0: xHCI BIOS handoff failed (BIOS bug ?) 00012201
[ 1.569845] pci 0000:00:15.0: quirk_usb_early_handoff+0x0/0x662 took 1135568
usecs
[ 1.569896] PCI: CLS 64 bytes, default 64
[ 1.570042] Trying to unpack rootfs image as initramfs...
[ 1.962810] Freeing initrd memory: 46776K
[ 1.962872] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.962881] software IO TLB: mapped [mem 0x7422f000-0x7822f000] (64MB)
[ 1.963002] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc
7c, max_idle_ns: 440795224246 ns
[ 1.963037] clocksource: Switched to clocksource tsc
[ 1.963207] check: Scanning for low memory corruption every 60 seconds
[ 1.968692] Initialise system trusted keyrings
[ 1.968723] Key type blacklist registered
[ 1.968831] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.973054] zbud: loaded
[ 1.974206] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.974720] fuse: init (API version 7.31)
[ 1.975095] Platform Keyring initialized
[ 1.987006] Key type asymmetric registered
[ 1.987009] Asymmetric key parser 'x509' registered
[ 1.987029] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
44)
[ 1.987142] io scheduler mq-deadline registered
[ 1.988057] pcieport 0000:00:13.0: PME: Signaling with IRQ 120
[ 1.988583] pcieport 0000:00:14.0: PME: Signaling with IRQ 121
[ 1.989090] pcieport 0000:00:14.1: PME: Signaling with IRQ 122
[ 1.989239] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.989406] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 1.989408] vesafb: scrolling: redraw
[ 1.989412] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.989453] vesafb: framebuffer at 0x80000000, mapped to 0x00000000d0bc9148,
using 4160k, total 4160k
[ 1.989585] fbcon: Deferring console take-over
[ 1.989588] fb0: VESA VGA frame buffer device
[ 1.989626] intel_idle: MWAIT substates: 0x11242020
[ 1.989629] intel_idle: v0.4.1 model 0x5C
[ 1.989954] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.991310] ACPI: AC Adapter [ADP0] (on-line)
[ 1.991526] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/
input/input0
[ 1.991542] ACPI: Lid Switch [LID0]
[ 1.991645] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0
0/input/input1
[ 1.991662] ACPI: Power Button [PWRB]
[ 1.996877] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.041686] Linux agpgart interface v0.103
[ 2.047014] loop: module loaded
[ 2.047578] libphy: Fixed MDIO Bus: probed
[ 2.047590] tun: Universal TUN/TAP device driver, 1.6
[ 2.047663] PPP generic driver version 2.4.2
[ 2.047765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.047772] ehci-pci: EHCI PCI platform driver
[ 2.047799] ehci-platform: EHCI generic platform driver
[ 2.047824] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.047829] ohci-pci: OHCI PCI platform driver
[ 2.047848] ohci-platform: OHCI generic platform driver
[ 2.047864] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.048379] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.048393] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus numbe
r 1
[ 2.049518] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 qu
irks 0x0000000081109810
[ 2.049527] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 2.049907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc
dDevice= 5.03
[ 2.049912] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.049916] usb usb1: Product: xHCI Host Controller
[ 2.049919] usb usb1: Manufacturer: Linux 5.3.0-46-generic xhci-hcd
[ 2.049923] usb usb1: SerialNumber: 0000:00:15.0
[ 2.050217] hub 1-0:1.0: USB hub found
[ 2.050244] hub 1-0:1.0: 8 ports detected
[ 2.052459] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.052469] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus numbe
r 2
[ 2.052478] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 2.052584] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc
dDevice= 5.03
[ 2.052588] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.052591] usb usb2: Product: xHCI Host Controller
[ 2.052595] usb usb2: Manufacturer: Linux 5.3.0-46-generic xhci-hcd
[ 2.052598] usb usb2: SerialNumber: 0000:00:15.0
[ 2.052858] hub 2-0:1.0: USB hub found
[ 2.052883] hub 2-0:1.0: 7 ports detected
[ 2.054896] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.054899] i8042: PNP: PS/2 appears to have AUX port disabled, if this is in
correct please boot with i8042.nopnp
[ 2.060732] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.060969] mousedev: PS/2 mouse device common for all mice
[ 2.061602] rtc_cmos 00:03: RTC can wake from S4
[ 2.062156] rtc_cmos 00:03: registered as rtc0
[ 2.062197] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpe
t irqs
[ 2.062211] i2c /dev entries driver
[ 2.062349] device-mapper: uevent: version 1.0.3
[ 2.062511] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-d
e...@redhat.com
[ 2.062568] platform eisa.0: Probing EISA bus 0
[ 2.062573] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 2.062577] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 2.062580] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 2.062583] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 2.062586] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 2.062589] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 2.062592] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 2.062595] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 2.062598] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 2.062601] platform eisa.0: EISA: Detected 0 cards
[ 2.062615] intel_pstate: Intel P-state driver initializing
[ 2.063260] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.064541] NET: Registered protocol family 10
[ 2.076805] input: AT Translated Set 2 keyboard as /devices/platform/i8042/se
rio0/input/input2
[ 2.082204] Segment Routing with IPv6
[ 2.082246] NET: Registered protocol family 17
[ 2.082563] Key type dns_resolver registered
[ 2.082994] RAS: Correctable Errors collector initialized.
[ 2.083130] microcode: sig=0x506c9, pf=0x1, revision=0x38
[ 2.083203] microcode: Microcode Update Driver: v2.2.
[ 2.083506] *** VALIDATE rdt ***
[ 2.083525] resctrl: L2 allocation detected
[ 2.083562] sched_clock: Marking stable (2082477637, 967115)->(2089040120, -5
595368)
[ 2.083902] registered taskstats version 1
[ 2.083916] Loading compiled-in X.509 certificates
[ 2.090584] Loaded X.509 cert 'Build time autogenerated kernel key: 58cc9974d
2170f3c76d2e16eeb21349faa3b1809'
[ 2.090644] zswap: loaded using pool lzo/zbud
[ 2.107634] Key type big_key registered
[ 2.117690] Key type encrypted registered
[ 2.117702] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.117718] ima: No TPM chip found, activating TPM-bypass!
[ 2.117735] ima: Allocated hash algorithm: sha1
[ 2.117746] No architecture policies found
[ 2.117768] evm: Initialising EVM extended attributes:
[ 2.117769] evm: security.selinux
[ 2.117770] evm: security.SMACK64
[ 2.117770] evm: security.SMACK64EXEC
[ 2.117771] evm: security.SMACK64TRANSMUTE
[ 2.117772] evm: security.SMACK64MMAP
[ 2.117772] evm: security.apparmor
[ 2.117773] evm: security.ima
[ 2.117774] evm: security.capability
[ 2.117775] evm: HMAC attrs: 0x1
[ 2.118478] PM: Magic number: 0:737:639
[ 2.118718] rtc_cmos 00:03: setting system clock to 2020-04-21T15:36:54 UTC (
1587483414)
[ 2.141885] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 2.144999] Freeing unused decrypted memory: 2040K
[ 2.146062] Freeing unused kernel image memory: 2676K
[ 2.151035] Write protecting the kernel read-only data: 22528k
[ 2.152231] Freeing unused kernel image memory: 2008K
[ 2.152930] Freeing unused kernel image memory: 1420K
[ 2.170293] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.170301] Run /init as init process
[ 2.336306] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.339023] ahci 0000:00:12.0: version 3.0
[ 2.349434] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 imp
l SATA mode
[ 2.349439] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum pa
rt deso sadm sds apst
[ 2.352664] scsi host0: ahci
[ 2.353382] scsi host1: ahci
[ 2.353513] ata1: SATA max UDMA/133 abar m2048@0x9141b000 port 0x9141b100 irq
124
[ 2.353516] ata2: SATA max UDMA/133 abar m2048@0x9141b000 port 0x9141b180 irq
124
[ 2.363578] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[ 2.363624] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[ 2.373729] libphy: r8169: probed
[ 2.373951] r8169 0000:02:00.0 eth0: RTL8106e, 8c:16:45:43:9f:2e, XID 449, IR
Q 125
[ 2.380690] i2c_hid i2c-ELAN0609:00: i2c-ELAN0609:00 supply vdd not found, us
ing dummy regulator
[ 2.380713] i2c_hid i2c-ELAN0609:00: i2c-ELAN0609:00 supply vddl not found, u
sing dummy regulator
[ 2.386999] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.416701] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 2.641137] usb 2-2: New USB device found, idVendor=2109, idProduct=0812, bcd
Device= b.e1
[ 2.641141] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.641144] usb 2-2: Product: USB3.0 Hub
[ 2.641146] usb 2-2: Manufacturer: VIA Labs, Inc.
[ 2.644934] hub 2-2:1.0: USB hub found
[ 2.645101] hub 2-2:1.0: 4 ports detected
[ 2.667118] ata2: SATA link down (SStatus 4 SControl 300)
[ 2.767146] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 2.791203] usb 1-2: New USB device found, idVendor=2109, idProduct=2812, bcd
Device= b.e0
[ 2.791207] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.791209] usb 1-2: Product: USB2.0 Hub
[ 2.791211] usb 1-2: Manufacturer: VIA Labs, Inc.
[ 2.792987] hub 1-2:1.0: USB hub found
[ 2.793254] hub 1-2:1.0: 4 ports detected
[ 2.827153] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.827321] ata1.00: supports DRM functions and may not be fully accessible
[ 2.827354] ata1.00: ATA-10: CT500MX500SSD1, M3CR023, max UDMA/133
[ 2.827356] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.828707] ata1.00: supports DRM functions and may not be fully accessible
[ 2.829796] ata1.00: configured for UDMA/133
[ 2.830057] scsi 0:0:0:0: Direct-Access ATA CT500MX500SSD1 023 PQ
: 0 ANSI: 5
[ 2.830414] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466
GiB)
[ 2.830416] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.830438] sd 0:0:0:0: [sda] Write Protect is off
[ 2.830441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.830469] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 2.830860] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.831447] sda: sda1
[ 2.832330] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.832334] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.927025] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 3.078442] usb 1-4: New USB device found, idVendor=1cf1, idProduct=0030, bcd
Device= 1.00
[ 3.078446] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.078448] usb 1-4: Product: ConBee II
[ 3.078450] usb 1-4: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3.078451] usb 1-4: SerialNumber: DE1997722
[ 3.155204] usb 2-2.3: new SuperSpeed Gen 1 USB device number 3 using xhci_hc
d
[ 3.175905] usb 2-2.3: New USB device found, idVendor=0bda, idProduct=8153, b
cdDevice=30.00
[ 3.175909] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber
=6
[ 3.175911] usb 2-2.3: Product: USB 10/100/1000 LAN
[ 3.175912] usb 2-2.3: Manufacturer: Realtek
[ 3.175914] usb 2-2.3: SerialNumber: 000002000000
[ 3.307157] usb 1-2.1: new low-speed USB device number 4 using xhci_hcd
[ 3.466457] usb 1-2.1: New USB device found, idVendor=045e, idProduct=00a4, b
cdDevice= 0.01
[ 3.466464] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber
=0
[ 3.466469] usb 1-2.1: Product: Microsoft(R) Compact Optical Mouse
[ 3.466472] usb 1-2.1: Manufacturer: Microsoft
[ 3.587146] usb 1-7: new high-speed USB device number 5 using xhci_hcd
[ 3.630827] usb 1-7: New USB device found, idVendor=5986, idProduct=1127, bcd
Device=53.07
[ 3.630861] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.630864] usb 1-7: Product: EasyCamera
[ 3.630866] usb 1-7: Manufacturer: Generic
[ 3.630868] usb 1-7: SerialNumber: 200901010001
[ 3.739154] usb 1-2.2: new low-speed USB device number 6 using xhci_hcd
[ 3.898180] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c31c, b
cdDevice=64.02
[ 3.898187] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber
=0
[ 3.898192] usb 1-2.2: Product: USB Keyboard
[ 3.898195] usb 1-2.2: Manufacturer: Logitech
[ 4.019177] usb 1-8: new full-speed USB device number 7 using xhci_hcd
[ 4.169801] usb 1-8: New USB device found, idVendor=0bda, idProduct=0821, bcd
Device= 2.00
[ 4.169804] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.169806] usb 1-8: Product: Bluetooth Radio
[ 4.169808] usb 1-8: Manufacturer: Realtek
[ 4.169809] usb 1-8: SerialNumber: 00e04c000001
[ 4.197554] usbcore: registered new interface driver usbhid
[ 4.197557] usbhid: USB HID core driver
[ 4.201802] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/p
ci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:045E:00A4.0001/input/input3
[ 4.202122] hid-generic 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mou
se [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:15.0-2.1/input0
[ 4.202486] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:15.0/
usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C31C.0002/input/input4
[ 4.259559] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Key
board [Logitech USB Keyboard] on usb-0000:00:15.0-2.2/input0
[ 4.260015] input: Logitech USB Keyboard Consumer Control as /devices/pci0000
:00/0000:00:15.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C31C.0003/input/input5
[ 4.319587] input: Logitech USB Keyboard System Control as /devices/pci0000:0
0/0000:00:15.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C31C.0003/input/input6
[ 4.320009] hid-generic 0003:046D:C31C.0003: input,hiddev0,hidraw2: USB HID v
1.10 Device [Logitech USB Keyboard] on usb-0000:00:15.0-2.2/input1
[ 4.396182] fbcon: Taking over console
[ 4.396314] Console: switching to colour frame buffer device 170x48
[ 4.407486] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.616066] systemd[1]: Inserted module 'autofs4'
[ 4.635935] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SEL
INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +
XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybr
id)
[ 4.655197] systemd[1]: Detected architecture x86-64.
[ 4.658659] systemd[1]: Set hostname to <homeserver>.
[ 4.659519] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argumen
t
[ 4.789981] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= refe
rences a path below legacy directory /var/run/, updating /var/run/dbus/system_bu
s_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 4.803026] systemd[1]: /lib/systemd/system/xrdp-sesman.service:9: PIDFile= r
eferences a path below legacy directory /var/run/, updating /var/run/xrdp/xrdp-s
esman.pid → /run/xrdp/xrdp-sesman.pid; please update the unit file accordingly.
[ 4.803535] systemd[1]: /lib/systemd/system/xrdp.service:8: PIDFile= referenc
es a path below legacy directory /var/run/, updating /var/run/xrdp/xrdp.pid → /r
un/xrdp/xrdp.pid; please update the unit file accordingly.
[ 4.846381] systemd[1]: /lib/systemd/system/docker.socket:5: ListenStream= re
ferences a path below legacy directory /var/run/, updating /var/run/docker.sock
→ /run/docker.sock; please update the unit file accordingly.
[ 4.876109] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.876310] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.903512] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.990607] lp: driver loaded but no devices found
[ 5.015761] ppdev: user-space parallel port driver
[ 5.260391] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:
2260988k SSFS
[ 5.608770] audit: type=1400 audit(1587483417.987:2): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=384 c
omm="apparmor_parser"
[ 5.615574] audit: type=1400 audit(1587483417.995:3): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=386 comm="
apparmor_parser"
[ 5.615952] audit: type=1400 audit(1587483417.995:4): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=
385 comm="apparmor_parser"
[ 5.615957] audit: type=1400 audit(1587483417.995:5): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//moun
t-namespace-capture-helper" pid=385 comm="apparmor_parser"
[ 5.622244] audit: type=1400 audit(1587483417.999:6): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=388 comm=
"apparmor_parser"
[ 5.666967] audit: type=1400 audit(1587483418.047:7): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="libreoffice-soffice" pid=387 comm
="apparmor_parser"
[ 5.666971] audit: type=1400 audit(1587483418.047:8): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=387
comm="apparmor_parser"
[ 5.678375] audit: type=1400 audit(1587483418.055:9): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="lsb_release" pid=390 comm="apparm
or_parser"
[ 5.699691] audit: type=1400 audit(1587483418.079:10): apparmor="STATUS" oper
ation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=391 com
m="apparmor_parser"
[ 5.700392] audit: type=1400 audit(1587483418.079:11): apparmor="STATUS" oper
ation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=389 comm="a
pparmor_parser"
[ 5.824883] systemd-journald[298]: Received request to flush runtime journal
from PID 1
[ 6.535266] elan_i2c i2c-ELAN0609:00: i2c-ELAN0609:00 supply vcc not found, u
sing dummy regulator
[ 6.627553] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/
PNP0C09:00/VPC2004:00/input/input7
[ 6.656383] elan_i2c i2c-ELAN0609:00: Elan Touchpad: Module ID: 0x005b, Firmw
are: 0x0001, Sample: 0x0002, IAP: 0x000d
[ 6.660047] input: Elan Touchpad as /devices/pci0000:00/0000:00:17.0/i2c_desi
gnware.0/i2c-1/i2c-ELAN0609:00/input/input8
[ 7.214379] cfg80211: Loading compiled-in X.509 certificates for regulatory d
atabase
[ 7.553077] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.565138] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 7.799056] aufs 4.x-rcN-20190805
[ 8.159025] Bluetooth: Core ver 2.22
[ 8.159056] NET: Registered protocol family 31
[ 8.159057] Bluetooth: HCI device and connection manager initialized
[ 8.159063] Bluetooth: HCI socket layer initialized
[ 8.159066] Bluetooth: L2CAP socket layer initialized
[ 8.159071] Bluetooth: SCO socket layer initialized
[ 8.207013] usbcore: registered new interface driver r8152
[ 8.224755] cdc_acm 1-4:1.0: ttyACM0: USB ACM device
[ 8.248841] usbcore: registered new interface driver cdc_ether
[ 8.287115] usb 2-2.3: reset SuperSpeed Gen 1 USB device number 3 using xhci_
hcd
[ 8.307700] usbcore: registered new interface driver cdc_acm
[ 8.307703] cdc_acm: USB Abstract Control Model driver for USB modems and ISD
N adapters
[ 8.315118] usbcore: registered new interface driver btusb
[ 8.316284] mc: Linux media interface: v0.10
[ 8.320492] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000a lmp_
ver=06 lmp_subver=8821
[ 8.321511] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 8.321516] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8821a_fw.bin
[ 8.323445] Bluetooth: hci0: RTL: rtl: loading
rtl_bt/rtl8821a_config.bin
[ 8.323498] bluetooth hci0: Direct firmware load for rtl_bt/rtl8821a_config.b
in failed with error -2
[ 8.323510] Bluetooth: hci0: RTL: cfg_sz -2, total sz 17428
[ 8.348742] r8152 2-2.3:1.0 eth0: v1.09.11
[ 8.586635] videodev: Linux video capture interface: v2.00
[ 8.661208] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms o
vfl timer
[ 8.661211] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 8.661212] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 8.661213] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 8.661214] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 8.870799] cryptd: max_cpu_qlen set to 1000
[ 8.925364] SSE version of gcm_enc/dec engaged.
[ 8.930362] Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_
bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 9.046285] checking generic (80000000 410000) vs hw (80000000 10000000)
[ 9.046289] fb0: switching to inteldrmfb from VESA VGA
[ 9.048031] Console: switching to colour dummy device 80x25
[ 9.050919] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 9.051269] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.051270] [drm] Driver supports precise vblank timestamp query.
[ 9.051425] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem
,decodes=io+mem:owns=io+mem
[ 9.056961] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.
7)
[ 9.078926] uvcvideo: Found UVC 1.00 device EasyCamera (5986:1127)
[ 9.115020] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not init
ialized!
[ 9.115024] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not ini
tialized!
[ 9.115025] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initial
ized!
[ 9.115138] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:15.0
/usb1/1-7/1-7:1.0/input/input9
[ 9.115569] usbcore: registered new interface driver uvcvideo
[ 9.115571] USB Video Class driver (1.1.1)
[ 9.122880] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_29.bin
[ 9.122887] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
[ 9.167375] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[ 9.169263] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.169294] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 9.169620] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/L
NXVIDEO:00/input/input10
[ 9.212628] r8169 0000:02:00.0 enp2s0: Link is Down
[ 9.231206] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.231548] rtlwifi: rtlwifi: wireless switch is on
[ 9.250277] fbcon: i915drmfb (fb0) is primary device
[ 9.250407] Console: switching to colour frame buffer device 170x48
[ 9.250439] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 9.661940] kvm: disabled by bios
[ 9.716664] kvm: disabled by bios
[ 9.765392] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[ 9.765435] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[ 9.765477] EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0
[ 9.765517] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[ 9.765559] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[ 9.765599] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[ 9.765641] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[ 9.765721] EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0
[ 9.765763] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[ 9.765803] EDAC pnd2: d_cr_drp0=0c000c005 ret=0
[ 9.765843] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.765884] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.765925] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.765926] EDAC pnd2: ECC disabled on channel 0
[ 9.765927] EDAC pnd2: Failed to register device with error -22.
[ 9.800919] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[ 9.800962] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[ 9.801003] EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0
[ 9.801045] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[ 9.801085] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[ 9.801127] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[ 9.801167] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[ 9.801248] EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0
[ 9.801289] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[ 9.801330] EDAC pnd2: d_cr_drp0=0c000c005 ret=0
[ 9.801371] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.801411] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.801452] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.801453] EDAC pnd2: ECC disabled on channel 0
[ 9.801454] EDAC pnd2: Failed to register device with error -22.
[ 9.843335] intel_telemetry_core Init
[ 9.909520] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 9.960343] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 10.518541] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_co
mponent_bind_ops [i915])
[ 10.642752] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_o
uts=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.642756] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0
/0x0/0x0)
[ 10.642758] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0
/0x0)
[ 10.642759] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 10.642761] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 10.642763] snd_hda_codec_generic hdaudioC0D0: Mic=0x19
[ 10.642765] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x12
[ 10.671654] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/soun
d/card0/input11
[ 10.671749] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.
0/sound/card0/input12
[ 10.671824] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00
:0e.0/sound/card0/input13
[ 10.671896] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00
:0e.0/sound/card0/input14
[ 10.671966] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00
:0e.0/sound/card0/input15
[ 10.672038] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00
:0e.0/sound/card0/input16
[ 10.672111] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:0
0:0e.0/sound/card0/input17
[ 10.707641] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow contr
ol rx/tx
[ 10.707659] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 11.121415] r8152 2-2.3:1.0 enx00e1000018de: renamed from eth0
[ 11.167054] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.167057] Bluetooth: BNEP filters: protocol multicast
[ 11.167067] Bluetooth: BNEP socket layer initialized
[ 11.314936] rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0
[ 11.516542] intel_rapl_common: Found RAPL domain package
[ 11.516548] intel_rapl_common: Found RAPL domain core
[ 11.516549] intel_rapl_common: Found RAPL domain uncore
[ 11.516551] intel_rapl_common: Found RAPL domain dram
[ 17.978320] kauditd_printk_skb: 34 callbacks suppressed
[ 17.978322] audit: type=1400 audit(1587483430.355:46): apparmor="STATUS" oper
ation="profile_load" profile="unconfined" name="docker-default" pid=1108 comm="a
pparmor_parser"
[ 18.420470] rfkill: input handler disabled
[ 19.082003] bridge: filtering via arp/ip/ip6tables is no longer available by
default. Update your scripts to load br_netfilter if you need this.
[ 19.101002] Bridge firewalling registered
[ 19.135237] bpfilter: Loaded bpfilter_umh pid 1231
[ 19.276708] Initializing XFRM netlink socket
[ 20.026461] br-b8fbf8096307: port 1(vetheabdebf) entered blocking state
[ 20.026465] br-b8fbf8096307: port 1(vetheabdebf) entered disabled state
[ 20.034114] device vetheabdebf entered promiscuous mode
[ 20.034403] br-b8fbf8096307: port 1(vetheabdebf) entered blocking state
[ 20.034405] br-b8fbf8096307: port 1(vetheabdebf) entered forwarding state
[ 20.034436] IPv6: ADDRCONF(NETDEV_CHANGE): br-b8fbf8096307: link becomes read
y
[ 20.034545] br-b8fbf8096307: port 1(vetheabdebf) entered disabled state
[ 20.995785] eth0: renamed from vethca032c0
[ 21.009067] IPv6: ADDRCONF(NETDEV_CHANGE): vetheabdebf: link becomes ready
[ 21.009131] br-b8fbf8096307: port 1(vetheabdebf) entered blocking state
[ 21.009133] br-b8fbf8096307: port 1(vetheabdebf) entered forwarding state
[ 22.609505] docker0: port 1(veth9879f34) entered blocking state
[ 22.609509] docker0: port 1(veth9879f34) entered disabled state
[ 22.611060] device veth9879f34 entered promiscuous mode
[ 22.645092] hassio: port 1(vethadd7d37) entered blocking state
[ 22.645096] hassio: port 1(vethadd7d37) entered disabled state
[ 22.645170] device vethadd7d37 entered promiscuous mode
[ 22.645556] hassio: port 1(vethadd7d37) entered blocking state
[ 22.645559] hassio: port 1(vethadd7d37) entered forwarding state
[ 22.645628] hassio: port 1(vethadd7d37) entered disabled state
[ 23.063894] eth0: renamed from veth706d661
[ 23.079470] IPv6: ADDRCONF(NETDEV_CHANGE): veth9879f34: link becomes ready
[ 23.079580] docker0: port 1(veth9879f34) entered blocking state
[ 23.079582] docker0: port 1(veth9879f34) entered forwarding state
[ 23.079628] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[ 23.232534] eth1: renamed from veth8454163
[ 23.251760] IPv6: ADDRCONF(NETDEV_CHANGE): vethadd7d37: link becomes ready
[ 23.251850] hassio: port 1(vethadd7d37) entered blocking state
[ 23.251854] hassio: port 1(vethadd7d37) entered forwarding state
[ 23.251925] IPv6: ADDRCONF(NETDEV_CHANGE): hassio: link becomes ready
[ 23.616149] udevd[180]: starting version 3.2.9
[ 23.627291] udevd[181]: starting eudev-3.2.9
[ 26.462413] audit: type=1400 audit(1587483438.839:47): apparmor="STATUS" oper
ation="profile_replace" info="same as current profile, skipping" profile="unconf
ined" name="hassio-supervisor" pid=2009 comm="apparmor_parser"
[ 26.462422] audit: type=1400 audit(1587483438.839:48): apparmor="STATUS" oper
ation="profile_replace" info="same as current profile, skipping" profile="unconf
ined" name="hassio-supervisor///usr/bin/gdbus" pid=2009 comm="apparmor_parser"
[ 26.462426] audit: type=1400 audit(1587483438.839:49): apparmor="STATUS" oper
ation="profile_replace" info="same as current profile, skipping" profile="unconf
ined" name="hassio-supervisor///usr/bin/git" pid=2009 comm="apparmor_parser"
[ 26.462430] audit: type=1400 audit(1587483438.839:50): apparmor="STATUS" oper
ation="profile_replace" info="same as current profile, skipping" profile="unconf
ined" name="hassio-supervisor///usr/bin/socat" pid=2009 comm="apparmor_parser"
[ 27.005824] hassio: port 2(veth9aae247) entered blocking state
[ 27.005828] hassio: port 2(veth9aae247) entered disabled state
[ 27.010460] device veth9aae247 entered promiscuous mode
[ 27.138257] hassio: port 3(veth8537958) entered blocking state
[ 27.138261] hassio: port 3(veth8537958) entered disabled state
[ 27.150151] device veth8537958 entered promiscuous mode
[ 27.160039] hassio: port 3(veth8537958) entered blocking state
[ 27.160044] hassio: port 3(veth8537958) entered forwarding state
[ 27.295709] hassio: port 4(veth9b00a48) entered blocking state
[ 27.295713] hassio: port 4(veth9b00a48) entered disabled state
[ 27.296231] device veth9b00a48 entered promiscuous mode
[ 27.296387] hassio: port 4(veth9b00a48) entered blocking state
[ 27.296389] hassio: port 4(veth9b00a48) entered forwarding state
[ 27.954957] hassio: port 3(veth8537958) entered disabled state
[ 27.955069] hassio: port 4(veth9b00a48) entered disabled state
[ 28.491556] eth0: renamed from vetha41e4f6
[ 28.524455] IPv6: ADDRCONF(NETDEV_CHANGE): veth8537958: link becomes ready
[ 28.524528] hassio: port 3(veth8537958) entered blocking state
[ 28.524531] hassio: port 3(veth8537958) entered forwarding state
[ 28.596025] eth0: renamed from vethc1af65c
[ 28.607568] IPv6: ADDRCONF(NETDEV_CHANGE): veth9aae247: link becomes ready
[ 28.607649] hassio: port 2(veth9aae247) entered blocking state
[ 28.607654] hassio: port 2(veth9aae247) entered forwarding state
[ 28.686056] eth0: renamed from veth7b6afc9
[ 28.703874] IPv6: ADDRCONF(NETDEV_CHANGE): veth9b00a48: link becomes ready
[ 28.703963] hassio: port 4(veth9b00a48) entered blocking state
[ 28.703965] hassio: port 4(veth9b00a48) entered forwarding state
[ 29.458347] udevd[322]: starting version 3.2.9
[ 29.471385] udevd[323]: starting eudev-3.2.9
[ 30.973286] hassio: port 5(veth9fb6ea5) entered blocking state
[ 30.973291] hassio: port 5(veth9fb6ea5) entered disabled state
[ 30.977414] device veth9fb6ea5 entered promiscuous mode
[ 31.165375] hassio: port 6(veth87623dd) entered blocking state
[ 31.165380] hassio: port 6(veth87623dd) entered disabled state
[ 31.165715] device veth87623dd entered promiscuous mode
[ 31.165942] hassio: port 6(veth87623dd) entered blocking state
[ 31.165944] hassio: port 6(veth87623dd) entered forwarding state
[ 31.287904] hassio: port 7(veth94dd1ee) entered blocking state
[ 31.287910] hassio: port 7(veth94dd1ee) entered disabled state
[ 31.290153] device veth94dd1ee entered promiscuous mode
[ 31.291528] hassio: port 7(veth94dd1ee) entered blocking state
[ 31.291533] hassio: port 7(veth94dd1ee) entered forwarding state
[ 31.986961] hassio: port 6(veth87623dd) entered disabled state
[ 31.987080] hassio: port 7(veth94dd1ee) entered disabled state
[ 32.195425] eth0: renamed from veth810e23c
[ 32.215701] IPv6: ADDRCONF(NETDEV_CHANGE): veth9fb6ea5: link becomes ready
[ 32.215792] hassio: port 5(veth9fb6ea5) entered blocking state
[ 32.215795] hassio: port 5(veth9fb6ea5) entered forwarding state
[ 32.347954] eth0: renamed from veth4847345
[ 32.367486] IPv6: ADDRCONF(NETDEV_CHANGE): veth94dd1ee: link becomes ready
[ 32.367556] hassio: port 7(veth94dd1ee) entered blocking state
[ 32.367560] hassio: port 7(veth94dd1ee) entered forwarding state
[ 32.515726] eth0: renamed from veth585c35d
[ 32.543726] IPv6: ADDRCONF(NETDEV_CHANGE): veth87623dd: link becomes ready
[ 32.543802] hassio: port 6(veth87623dd) entered blocking state
[ 32.543807] hassio: port 6(veth87623dd) entered forwarding state
[ 38.652079] hassio: port 8(veth8d2816d) entered blocking state
[ 38.652083] hassio: port 8(veth8d2816d) entered disabled state
[ 38.652174] device veth8d2816d entered promiscuous mode
[ 38.925531] hassio: port 9(veth14eb76d) entered blocking state
[ 38.925535] hassio: port 9(veth14eb76d) entered disabled state
[ 38.928108] device veth14eb76d entered promiscuous mode
[ 38.929815] hassio: port 9(veth14eb76d) entered blocking state
[ 38.929819] hassio: port 9(veth14eb76d) entered forwarding state
[ 39.027471] hassio: port 10(veth3e500bc) entered blocking state
[ 39.027475] hassio: port 10(veth3e500bc) entered disabled state
[ 39.027612] device veth3e500bc entered promiscuous mode
[ 39.027742] hassio: port 10(veth3e500bc) entered blocking state
[ 39.027744] hassio: port 10(veth3e500bc) entered forwarding state
[ 39.178502] hassio: port 11(veth958363d) entered blocking state
[ 39.178507] hassio: port 11(veth958363d) entered disabled state
[ 39.187619] device veth958363d entered promiscuous mode
[ 39.213435] hassio: port 11(veth958363d) entered blocking state
[ 39.213440] hassio: port 11(veth958363d) entered forwarding state
[ 39.399779] hassio: port 12(veth2c25631) entered blocking state
[ 39.399784] hassio: port 12(veth2c25631) entered disabled state
[ 39.431235] device veth2c25631 entered promiscuous mode
[ 39.511959] hassio: port 12(veth2c25631) entered blocking state
[ 39.511963] hassio: port 12(veth2c25631) entered forwarding state
[ 39.666938] hassio: port 9(veth14eb76d) entered disabled state
[ 39.667057] hassio: port 10(veth3e500bc) entered disabled state
[ 39.667124] hassio: port 11(veth958363d) entered disabled state
[ 39.667174] hassio: port 12(veth2c25631) entered disabled state
[ 42.209416] eth0: renamed from veth3ba2e26
[ 42.232559] IPv6: ADDRCONF(NETDEV_CHANGE): veth8d2816d: link becomes ready
[ 42.232635] hassio: port 8(veth8d2816d) entered blocking state
[ 42.232639] hassio: port 8(veth8d2816d) entered forwarding state
[ 42.420040] eth0: renamed from vetha383fde
[ 42.450204] eth0: renamed from veth8d34a02
[ 42.468389] IPv6: ADDRCONF(NETDEV_CHANGE): veth14eb76d: link becomes ready
[ 42.468475] hassio: port 9(veth14eb76d) entered blocking state
[ 42.468478] hassio: port 9(veth14eb76d) entered forwarding state
[ 42.487024] IPv6: ADDRCONF(NETDEV_CHANGE): veth2c25631: link becomes ready
[ 42.487107] hassio: port 12(veth2c25631) entered blocking state
[ 42.487110] hassio: port 12(veth2c25631) entered forwarding state
[ 42.591725] eth0: renamed from veth85a4be3
[ 42.604134] IPv6: ADDRCONF(NETDEV_CHANGE): veth958363d: link becomes ready
[ 42.604220] hassio: port 11(veth958363d) entered blocking state
[ 42.604225] hassio: port 11(veth958363d) entered forwarding state
[ 42.688849] eth0: renamed from vethf9c2332
[ 42.706213] IPv6: ADDRCONF(NETDEV_CHANGE): veth3e500bc: link becomes ready
[ 42.706295] hassio: port 10(veth3e500bc) entered blocking state
[ 42.706302] hassio: port 10(veth3e500bc) entered forwarding state
[ 49.107833] udevd[181]: starting version 3.2.9
[ 49.115245] udevd[182]: starting eudev-3.2.9
[ 139.486347] hassio: port 13(veth2e93740) entered blocking state
[ 139.486351] hassio: port 13(veth2e93740) entered disabled state
[ 139.492534] device veth2e93740 entered promiscuous mode
[ 139.495587] IPv6: ADDRCONF(NETDEV_CHANGE): veth2e93740: link becomes ready
[ 139.495662] hassio: port 13(veth2e93740) entered blocking state
[ 139.495664] hassio: port 13(veth2e93740) entered forwarding state
[ 139.495700] IPv6: ADDRCONF(NETDEV_CHANGE): veth57b4f09: link becomes ready
[ 139.786913] hassio: port 14(veth7d3aa09) entered blocking state
[ 139.786918] hassio: port 14(veth7d3aa09) entered disabled state
[ 139.788530] device veth7d3aa09 entered promiscuous mode
[ 139.807216] hassio: port 14(veth7d3aa09) entered blocking state
[ 139.807221] hassio: port 14(veth7d3aa09) entered forwarding state
[ 139.850030] IPv6: ADDRCONF(NETDEV_CHANGE): veth7d3aa09: link becomes ready
[ 141.950413] hassio: port 14(veth7d3aa09) entered disabled state
[ 141.960305] eth0: renamed from veth96b5639
[ 141.985174] hassio: port 14(veth7d3aa09) entered blocking state
[ 141.985179] hassio: port 14(veth7d3aa09) entered forwarding state
[ 142.252796] hassio: port 13(veth2e93740) entered disabled state
[ 142.270144] eth0: renamed from veth57b4f09
[ 142.282448] hassio: port 13(veth2e93740) entered blocking state
[ 142.282456] hassio: port 13(veth2e93740) entered forwarding state
[ 152.095427] rfkill: input handler enabled
[ 153.627928] Bluetooth: RFCOMM TTY layer initialized
[ 153.627938] Bluetooth: RFCOMM socket layer initialized
[ 153.627945] Bluetooth: RFCOMM ver 1.11
[ 165.098373] rfkill: input handler disabled
[ 553.454618] rfkill: input handler enabled
[ 560.469931] rfkill: input handler disabled
[ 860.055088] perf: interrupt took too long (2523 > 2500), lowering kernel.perf
_event_max_sample_rate to 79250
alsa-base.conf:
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && {
/sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet
--use-blacklist snd-seq ; }
#
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && {
/sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && {
/sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && {
/sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet
--use-blacklist snd-seq-oss ; : ; }
#
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS
&& { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS
&& { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS
&& { /sbin/modprobe --quiet --use-blacklist snd-seq ; }
# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && {
/sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
options snd-hda-intel dmic_detect=0
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1864061
Title:
PCI/internal sound card not detected
Status in linux package in Ubuntu:
Invalid
Status in linux-oem-osp1 package in Ubuntu:
Invalid
Status in linux source package in Bionic:
Invalid
Status in linux-oem-osp1 source package in Bionic:
Fix Released
Status in linux source package in Eoan:
Fix Released
Status in linux-oem-osp1 source package in Eoan:
Fix Released
Bug description:
The sof-pci-dev and snd-soc-skl all contains the same pciid, if
the soc-skl is loaded ahead of sof-pci-dev, the sof driver will
not work anymore, in the oem project, we manually put the soc-skl
in the blacklist.
From kernel-5.4 (focal kernel), the driver soc-skl is disabled by
default, and there is no users report any issues on it. So let us
disable soc-skl in the eoan and osp1 kernel too.
The patch for eoan kernel doesn't remove the modules because looks
like the abi folder are not controlled by git. This will break the
modulecheck, so if this patch could be merged, please help remove
those modules:
snd-soc-skl
snd-soc-skl-ipc
snd-soc-skl-ssp-clk
[Impact]
If soc-skl driver is loaded ahead of sof driver, the sof could
not work anymore, we need to blacklist the soc-skl manually
[Fix]
Like the focal kernel, we disable the soc_skl driver in the kernel
config
[Test Case]
Tested on Lenovo and Dell machines which has dmic, the sof driver
could be loaded successfully.
Tested on the machinces without the dmic, the legacy hda driver
worked well as before.
[Regression Risk]
Low, Focal kernel and mainine-5.5, 5.6-rc kernel all disabled this
dirver; and We have not met a machine need the soc_skl driver yet;
and Intel claim that the sof could replace the soc_skl driver.
In the -41 kernel, we introduced a patch from stable kernel, that
make the sof driver crash, and there is a fix patch in the 5.6-rc1,
and this fix patch is already in the stable and is merged to focal
kernel, now we backport this patch to Eoan kernel if -42 doesn't
introduce this fix patch from stable.
The patch introduced the crash:
commit 063821115e02229d5fd3de31bad270d5e30aeb41
Author: Dragos Tarcatu <dragos_tarc...@mentor.com>
Date: Mon Dec 9 18:39:38 2019 -0600
ASoC: topology: Check return value for snd_soc_add_dai_link()
BugLink: https://bugs.launchpad.net/bugs/1861929
[ Upstream commit 76d2703649321c296df7ec0dafd50add96215de4 ]
snd_soc_add_dai_link() might fail. This situation occurs for
instance in a very specific use case where a PCM device and a
Back End DAI link are given identical names in the topology.
When this happens, soc_new_pcm_runtime() fails and then
snd_soc_add_dai_link() returns -ENOMEM when called from
soc_tplg_fe_link_create(). Because of that, the link will not
get added into the card list, so any attempt to remove it later
ends up in a panic.
Fix that by checking the return status and free the memory in case
of an error.
Reviewed-by: Ranjani Sridharan <ranjani.sridha...@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarc...@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.boss...@linux.intel.com>
Link:
https://lore.kernel.org/r/20191210003939.15752-2-pierre-louis.boss...@linux.intel.com
Signed-off-by: Mark Brown <broo...@kernel.org>
Signed-off-by: Sasha Levin <sas...@kernel.org>
Signed-off-by: Kamal Mostafa <ka...@canonical.com>
Signed-off-by: Khalid Elmously <khalid.elmou...@canonical.com>
[Impact]
During the boot, the sof driver crash because the hdmi_pcm_list
is not initialized before it is used.
[Fix]
This bug is fixed in the mainline kernel v5.6-rc1, now backport
this patch to ubuntu kernel
[Test Case]
Boot the -41 kernel with this patch added.
blacklist the snd_soc_skl
the kernel can boot successfully, and sof driver worked well
[Regression Risk]
Low, the patches are backported from upstream kernel, and I tested
this patch on Lenovo and Dell dmic machines. Focal kernel already
has this patch and works well.
Probably a kernel bug.
The sound card isn't detected in 5.3.0-41-generic
Booting 5.3.0-40-generic does work.
The relevant dmesg message is:
[ 9.845441] skl_hda_dsp_generic skl_hda_dsp_generic: Unsupported
HDAudio/iDisp configuration found
[ 9.845447] skl_hda_dsp_generic: probe of skl_hda_dsp_generic failed with
error -22
ProblemType: Bug
DistroRelease: Ubuntu 19.10
Package: alsa-base 1.0.25+dfsg-0ubuntu5
ProcVersionSignature: Ubuntu 5.3.0-41.33-generic 5.3.18
Uname: Linux 5.3.0-41-generic x86_64
ApportVersion: 2.20.11-0ubuntu8.4
Architecture: amd64
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq',
'/dev/snd/timer'] failed with exit code 1:
CurrentDesktop: ubuntu:GNOME
Date: Thu Feb 20 16:46:21 2020
InstallationDate: Installed on 2019-10-07 (136 days ago)
InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Release amd64 (20190416)
PackageArchitecture: all
SourcePackage: alsa-driver
Symptom: audio
Title: PCI/internal sound card not detected
UpgradeStatus: Upgraded to eoan on 2019-11-19 (93 days ago)
dmi.bios.date: 01/15/2020
dmi.bios.vendor: LENOVO
dmi.bios.version: N2HET44W (1.27 )
dmi.board.asset.tag: Not Available
dmi.board.name: 20QDCTO1WW
dmi.board.vendor: LENOVO
dmi.board.version: SDK0J40697 WIN
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: None
dmi.modalias:
dmi:bvnLENOVO:bvrN2HET44W(1.27):bd01/15/2020:svnLENOVO:pn20QDCTO1WW:pvrThinkPadX1Carbon7th:rvnLENOVO:rn20QDCTO1WW:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone:
dmi.product.family: ThinkPad X1 Carbon 7th
dmi.product.name: 20QDCTO1WW
dmi.product.sku: LENOVO_MT_20QD_BU_Think_FM_ThinkPad X1 Carbon 7th
dmi.product.version: ThinkPad X1 Carbon 7th
dmi.sys.vendor: LENOVO
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1864061/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
