This bug was fixed in the package linux-raspi - 5.8.0-1013.16 --------------- linux-raspi (5.8.0-1013.16) groovy; urgency=medium
* groovy/linux-raspi: 5.8.0-1013.16 -proposed tracker (LP: #1911336) * rpi3b+ wifi doesn't get used if ethernet disconnected (LP: #1890487) - net: lan78xx: Ack pending PHY ints when resetting * groovy/linux-raspi: Upstream raspberrypi patchset 2020-11-05 (LP: #1903541) - brcmfmac: Increase power saving delay to 2s - overlays: Update i2c0 overlay to disable the i2c0mux. - dt: Remove duplicate assignment for i2c0 pinctrl config - overlays: Add option for composite to vc4-kms-v3d-pi4. - overlays: minor typo in instructions - overlays: Regenerate upstream-pi4 overlay - overlays: Add parameters to adafruit18, sainsmart18 - rpivid_h265: Fix width/height typo - overlays: Add extra CMA sizes (up to 512M) - overlays: Add note to BCM2711 overlays - configs: Remove I2C_BRCMSTB from the kernel - net: bcmgenet: Reset RBUF on first open - ASoC: cs42xx8: Only define cs42xx8_of_match once - configs: Regenerate the defconfigs - staging: bcm2835-codec: Use a define the completion timeout - staging: bcm2835-codec: Correct buffer number change on start streaming - USB: gadget: f_hid: avoid crashes and log spam - Update hy28b-overlay.dts - overlays: Update display GPIO declarations - configs: Add CONFIG_RTC_DRV_SD3078=m - overlays: Add sd3078 to the i2c-rtc overlay - configs: Restore SND_PCM_OSS=m - dwc_otg: initialise sched_frame for periodic QHs that were parked - arm64: configs: Enable Unicam support - arm64: configs: Enable V4L2 test module support - staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32 - staging: bcm2835-codec: Replace deprecated V4L2_PIX_FMT_BGR32 - ARM: bcm2711-rpi.dts: Unlock DMA channels 9 & 10 - gpio: Add gpio-fsm driver - configs: Add CONFIG_GPIO_FSM=m - overlays: Add fsm-demo overlay - overlays: Add ghost-amp overlay - Fixes a problem when module probes before i2c module is available - [Config] raspi: updateconfigs after update to rpi-5.8.y 2020-11-05 * Raspberry Pi 400 Kernel Panic (LP: #1907432) - SAUCE: Revert "mailbox: avoid timer start from callback" [ Ubuntu: 5.8.0-39.44 ] * groovy/linux: 5.8.0-39.44 -proposed tracker (LP: #1911350) * overlay: permission regression in 5.4.0-51.56 due to patches related to CVE-2020-16120 (LP: #1900141) - ovl: do not fail because of O_NOATIME [ Ubuntu: 5.8.0-38.43 ] * groovy/linux: 5.8.0-38.43 -proposed tracker (LP: #1911143) * CVE-2020-28374 - SAUCE: target: fix XCOPY NAA identifier lookup * Packaging resync (LP: #1786013) - update dkms package versions [ Ubuntu: 5.8.0-36.40 ] * debian/scripts/file-downloader does not handle positive failures correctly (LP: #1878897) - [Packaging] file-downloader not handling positive failures correctly [ Ubuntu: 5.8.0-35.39 ] * Packaging resync (LP: #1786013) - update dkms package versions * CVE-2021-1052 // CVE-2021-1053 - [Packaging] NVIDIA -- Add the NVIDIA 460 driver -- Ian May <ian....@canonical.com> Wed, 13 Jan 2021 22:57:35 -0600 ** Changed in: linux-raspi (Ubuntu Groovy) Status: Fix Committed => Fix Released ** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2020-16120 ** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2020-28374 ** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2021-1052 ** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2021-1053 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-raspi in Ubuntu. https://bugs.launchpad.net/bugs/1907432 Title: Raspberry Pi 400 Kernel Panic Status in linux-raspi package in Ubuntu: Confirmed Status in linux-raspi source package in Groovy: Fix Released Bug description: When I power the Pi 400 down (with the key-combination on the pi 400 or with the navigation from the top right), a line like this is on screen: [59095.049506] reboot: Power down or that: [25784.810857] reboot: Power down Under this line, the cursor is frozen. After a while, suddenly, the text scrolls and stops after a while. I can read something about "Kernel Panic" on screen. I cannot power the device off. I have to pull the power plug to shut it down, or to re-plug it to reset it. The power-button (2sec) does not work, 10 seconds reset signal, neither. Here you can find my initial question to this phenomenon: https://answers.launchpad.net/ubuntu/+question/694349 This I should include: Linux version 5.8.0-1008-raspi (buildd@bos02-arm64-062) (gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35.1) #11-Ubuntu SMP PREEMPT Thu Nov 12 15:49:32 UTC 2020 I hope this report includes enough information. If not, please do not hesitate to contact me! Thanks so much for this project and thx for being a part of it! <3 ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: linux-image-5.8.0-1008-raspi 5.8.0-1008.11 ProcVersionSignature: Ubuntu 5.8.0-1008.11-raspi 5.8.17 Uname: Linux 5.8.0-1008-raspi aarch64 ApportVersion: 2.20.11-0ubuntu50.2 Architecture: arm64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed Dec 9 10:40:08 2020 ImageMediaBuild: 20201022 SourcePackage: linux-raspi UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1907432/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp