This bug was fixed in the package linux-raspi - 5.11.0-1003.3 --------------- linux-raspi (5.11.0-1003.3) hirsute; urgency=medium
* hirsute/linux-raspi: 5.11.0-1003.3 -proposed tracker (LP: #1917734) * Packaging resync (LP: #1786013) - [Packaging] update variants - [Packaging] update update.conf * Miscellaneous Ubuntu changes - [Packaging] raspi: Initial version of linux-raspi for Hirsute - [Config] raspi: updateconfigs after rebase to Ubuntu-5.11.0-11.12 - [Packaging] raspi: Set disable_d_i=true in hooks.mk - [Packaging] raspi: Add dctrl-tools to Build-Depends - [Packaging] raspi: Correctly implement noudeb build profiles - [Packaging] raspi: remove Provides: aufs-dkms [ Ubuntu: 5.11.0-11.12 ] * hirsute/linux: 5.11.0-11.12 -proposed tracker (LP: #1917335) * Packaging resync (LP: #1786013) - update dkms package versions - [Packaging] update variants * Support no udeb profile (LP: #1916095) - [Packaging] replace custom filter script with dctrl-tools - [Packaging] correctly implement noudeb build profiles. * Miscellaneous Ubuntu changes - [Packaging] dkms-versions -- remove nvidia-graphics-drivers-440-server - [Debian] run ubuntu-regression-suite for linux-unstable - [Packaging] remove Provides: aufs-dkms - [Packaging] Change source package name to linux - [Config] update gcc version in config due to toolchain update * Miscellaneous upstream changes - Revert "UBUNTU: [Config] disable nvidia and nvidia_server builds" - Xen/x86: don't bail early from clear_foreign_p2m_mapping() - Xen/x86: also check kernel mapping in set_foreign_p2m_mapping() - Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages() - Xen/gntdev: correct error checking in gntdev_map_grant_pages() - xen/arm: don't ignore return errors from set_phys_to_machine - xen-blkback: don't "handle" error by BUG() - xen-netback: don't "handle" error by BUG() - xen-scsiback: don't "handle" error by BUG() - xen-blkback: fix error handling in xen_blkbk_map() - tty: protect tty_write from odd low-level tty disciplines - Bluetooth: btusb: Always fallback to alt 1 for WBS - media: pwc: Use correct device for DMA - bpf: Fix truncation handling for mod32 dst reg wrt zero - HID: make arrays usage and value to be the same - USB: quirks: sort quirk entries - usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable - ntfs: check for valid standard information attribute - Bluetooth: btusb: Some Qualcomm Bluetooth adapters stop working - arm64: tegra: Add power-domain for Tegra210 HDA - hwmon: (dell-smm) Add XPS 15 L502X to fan control blacklist - KVM: x86: Zap the oldest MMU pages, not the newest - KVM: do not assume PTE is writable after follow_pfn - mm: provide a saner PTE walking API for modules - KVM: Use kvm_pfn_t for local PFN variable in hva_to_pfn_remapped() -- Juerg Haefliger <jue...@canonical.com> Thu, 04 Mar 2021 14:42:19 +0100 ** Changed in: linux-raspi (Ubuntu Hirsute) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-raspi in Ubuntu. https://bugs.launchpad.net/bugs/1914015 Title: hirsute/linux-raspi: Upstream raspberrypi patchset 2021-01-23 Status in linux-raspi package in Ubuntu: Fix Released Status in linux-raspi source package in Hirsute: Fix Released Bug description: Upstream raspberrypi patchset 2021-01-23 Ported from the following raspberrypi branch: rpi-5.11.y from https://github.com/raspberrypi/linux.git configs: Add CRYPTO_ADIANTUM=m configs: Regenerate defconfigs configs: Add NVMEM_RMEM=m for 2711 ARM: multi_v7_defconfig: Enable nvmem's rmem driver arm64: defconfig: Enable nvmem's rmem driver ARM: dts: bcm2711: Add reserved memory template to hold firmware configuration nvmem: Add driver to expose reserved memory as nvmem dt-bindings: nvmem: Add bindings for rmem driver configs: Add CONFIG_USB_NET_AQC111=m configs: Add CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m staging: vc04_services: ISP: Add colour denoise control uapi: bcm2835-isp: Add colour denoise configuration bcm2835-dma: Add bcm2835-dma: Add DMA_WIDE_SOURCE and DMA_WIDE_DEST flags dt: Enable DMA_WIDE_SOURCE and DMA_WIDE_DEST for hdmi audio configs: Enable BCM2835 thermal driver in kernel8 vc4: Correct POS1_SCL for hvs5 vc4: Correct lbm size and calculation overlays: seeed-can-fd-hat: clarify how to identify HAT version dtoverlays: Update sensor overlays to use cam1_reg where possible dt: Add a camera regulator node to all downstream Pi platforms arch/arm: Add __memset alias to memset_rpi.S overlays: add spi override to merus-amp overlay overlays: add wm8960-soundcard overlay overlays: Add overlay for Seeed Studio CAN BUS FD HAT v1 (based on mcp2517fd) overlays: give Seeed Studio CAN BUS FD HAT a -v2 postfix media: i2c: ov5647: Selection compliance fixes bcm2711-rpi.dtsi: Bump hdmi audio dma priority to max bcm2835-dma: Avoid losing CS flags after interrupt dts: Enable DMA_WIDE_SOURCE for hdmi audio dma staging/bcm2835-isp: Log the number of excess supported formats staging/bcm2835-isp: Add the unpacked (16bpp) raw formats staging/bcm2835-codec: Log the number of excess supported formats staging/bcm2835-codec: Add the unpacked (16bpp) raw formats staging/vc04_services: Add additional unpacked raw formats staging/mmal-vchiq: Fix incorrect static vchiq_instance. staging: vchiq: Fix bulk transfers on 64-bit builds vc-sm-cma: fixed kbuild problem staging: vchiq: Fix bulk userdata handling drm/vc4: hdmi: Enable 10/12 bpc output drm/vc4: hdmi: Limit the BCM2711 to the max without scrambling drm/vc4: hdmi: Use the connector state pixel rate for the PHY drm/vc4: hdmi: Store pixel frequency in the connector state drm/vc4: hdmi: Create a custom connector state drm/vc4: hdmi: Don't access the connector state in reset if kmalloc fails drm/vc4: hdmi: Take into account the clock doubling flag in atomic_check drm/vc4: Pass the atomic state to encoder hooks drm/vc4: hvs: Align the HVS atomic hooks to the new API drm/atomic: Pass the full state to CRTC atomic enable/disable media: i2c: imx477: Selection compliance fixes drm/vc4: Correct DSI register definition vc4_hdmi: Move hdmi reset to bind drm/vc4: Add configuration for BCM2711 DSI1. dt-bindings: Add compatible for BCM2711 DSI1 drm/vc4: Add support for DSI0 media: ov9281: Add 1280x720 and 640x480 modes drm/panel/raspberrypi-ts: Insert delay before polling for startup state drm/panel/raspberrypi-touchscreen: Use independent I2C actions with delay. Input: edt-ft5x06: Poll the device if no interrupt is configured. vc4: Clear unused infoframe packet RAM registers PCI: brcmstb: Restore initial fundamental reset vc4_hdmi: Report that 3d/stereo is allowed phy: broadcom: Add bcm54213pe configuration phy: broadcom: split out the BCM54213PE from the BCM54210E IDs firmware: raspberrypi: Add support for tryonce reboot flag watchdog: bcm2835: Ignore params after the partition number bcm2835-pcm: Fix up multichannel pcm audio PiFi-40 driver, Makefile and Kconfig bcm2708_fb: Fix a build warning rpivid_h625: Fix build warnings gpio-fsm: Fix a build warning dwc_otg: Minimise header and fix build warnings rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover staging: bcm2835-audio: Add disable-headphones flag xhci: quirks: add link TRB quirk for VL805 drm/vc4: Add the 2711 HVS as a suitable DMA node drm/vc4: Add all the HDMI registers into the debugfs dumps drm/vc4: Reading the hotplug register is only valid if no GPIO defined gpio: Add gpio-fsm driver staging: vc04_services: ISP: Add a more complex ISP processing component uapi: bcm2835-isp: Add bcm2835-isp uapi header file bcm2835-dma: only reserve channel 0 if legacy dma driver is enabled staging: vc04_services: Add a V4L2 M2M codec driver staging: mmal-vchiq: Use vc-sm-cma to support zero copy staging: mmal-vchiq: Add monochrome image formats staging: vchiq-mmal: Add support for 14bit Bayer staging: vc04_services: Add new vc-sm-cma driver staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32 dwc_otg: initialise sched_frame for periodic QHs that were parked USB: gadget: f_hid: avoid crashes and log spam char: Add broadcom char drivers back to build files net: bcmgenet: Reset RBUF on first open rpivid_h265: Fix width/height typo brcmfmac: Increase power saving delay to 2s staging/fbtft: Add support for display variants media: i2c: imx477: Parse and register properties media: i2c: imx477: Return correct result on sensor id verification media: i2c: imx477: Add support for adaptive frame control media: i2c: Add driver for Sony IMX477 sensor drm/vc4: Add FKMS as an acceptable node for dma ranges. drm/vc4: Add firmware-kms mode drm/vc4: Add support for YUV color encodings and ranges drm/vc4: Add support for DRM_FORMAT_P030 to vc4 planes vc4: cec: Restore cec physical address on reconnect vc4: Report channel mapping back to userspace vc_hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE vc4_hdmi: Remove firmware logic for MAI threshold setting drm/vc4: enable HBR MAI format on HBR streams drm/vc4: move setup from hw_params to prepare drm/vc4: add iec958 controls to vc4_hdmi vc4_hdmi: Set HDMI_MAI_FMT vc4_hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET drm/vc4: Adopt the dma configuration from the HVS or V3D component vc4_hdmi: Remove cec_available flag as always supported vc4_hdmi: Adjust CEC ref clock based on its input clock vc4_hdmi: Make irq shared vc4_hdmi_regs: Make interrupt mask variant specific vc4_hdmi_regs: Add Intr2 register block vc4_hdmi: Fix up CEC registers vc4_hdmi: Fix register offset when sending longer CEC messages vc4_hdmi: BCM2835 requires a fixed hsm clock for CEC to work vc4: Set driver_name for card include/firmware: Add enum for RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID vchiq_2835_arm: Implement a DMA pool for small bulk transfers (#2699) dwc_otg: whitelist_table is now productlist_table bcm2835-mmc: uninitialized_var is no more media: i2c: ov9281: Add support for 8 bit readout media: i2c: tc358743: Only allow supported pixel fmts in set_fmt media: bcm2835-unicam: Drop WARN on uing direct cache alias staging: media: rpivid: Select MEDIA_CONTROLLER and MEDIA_CONTROLLER_REQUEST_API media: bcm2835: unicam: Select MEDIA_CONTROLLER and VIDEO_V4L2_SUBDEV_API ARM: proc-v7: Force misalignment of early stmia bcm2835-dma: Advertise the full DMA range staging: vchiq_arm: children inherit DMA config leds: Add the actpwr trigger media: i2c: ov5647: Parse and register properties dt-bindings: bcm2835-unicam: Update documentation with new clock params media: bcm2835: unicam: Set VPU min clock freq to 250Mhz. media: bcm2835-unicam: Ensure type is VIDEO_CAPTURE in [g|s]_selection media: bcm2835-unicam: Reinstate V4L2_CAP_READWRITE in the caps media: i2c: imx290: Set the colorspace fields in the format media: i2c: imx290: Add support for g_selection to report cropping media: i2c: imx290: Explicitly set v&h blank on mode change media: i2c: ov9281: Read chip ID via 2 reads media: i2c: ov9281: Fixup for recent kernel releases, and remove custom code media: i2c: ov9281: add enum_frame_interval function for iq tool 2.2 and hal3 media: i2c: ov9281: fix mclk issue when probe multiple camera. media: i2c: add ov9281 driver. bcm2835-dma: Add NO_WAIT_RESP flag media: bcm2835-unicam: Add support for unpacked 14bit Bayer formats media: bcm2835-unicam: Add support for 14bit mono sources media: bcm2835-unicam: Add support for 12bit mono packed format media: Add a pixel format for MIPI packed 14bit luma only. media: Add a pixel format for MIPI packed 12bit luma only. serial: 8250: bcm2835aux - defer if clock is zero media: i2c: imx290: Switch set_hmax to use imx290_write_buffered_reg media : i2c: imx290: Add support for the mono sensor variant. media: dt-bindings: media: i2c: Add mono version to IMX290 bindings media: i2c: imx290: Add H and V flip controls media: i2c: imx290: Add exposure control to the driver. media: i2c: imx290: Add support for V4L2_CID_VBLANK media: i2c: imx290: Convert HMAX setting into V4L2_CID_HBLANK media: i2c: imx290: Correct range for V4L2_CID_GAIN to 0-238 media: i2c: imx290: Add support for 74.25MHz clock media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called media: bcm2835-unicam: Avoid gcc warning over {0} on endpoint media: bcm2835-unicam: Add support for get_mbus_config to set num lanes media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface brcmfmac: Prefer a ccode from OTP over nvram file staging: bcm2835-audio: Add missing MODULE_ALIAS media: irs1125: Keep HW in sync after imager reset media: irs1125: Atomic access to imager reconfiguration media: irs1125: Refactoring and debug messages media: irs1125: Using i2c_transfer for ic2 reads PCI: brcmstb: Add DT property to control L1SS gpiolib: Don't prevent IRQ usage of output GPIOs snd_bcm2835: disable HDMI audio when vc4 is used (#3640) brcmfmac: BCM43436 needs dedicated firmware staging: vchiq_arm: Clean up 40-bit DMA support SQUASH: pinctrl: bcm2835: Set base for bcm2711 GPIO to 0 zswap: Defer zswap initialisation staging:vc04_services: bcm2835-camera: Request headers with I-frame staging: vc04_services: mmal-vchiq: Update parameters list sc16is7xx: Fix for hardware flow control dt-bindings: media: i2c: Add IMX477 CMOS sensor binding video: bcm2708_fb: Disable FB if no displays found media: i2c: tc358743: Fix fallthrough warning media: i2c: ov5647: Advertise the correct exposure range media: i2c: ov5647: Use member names in mode tables media: i2c: ov5647: Neither analogue gain nor exposure need EXECUTE_ON_WRITE media: i2c: ov5647: Add support for V4L2_CID_VBLANK media: i2c: ov5647: Set V4L2_SUBDEV_FL_HAS_EVENTS flag media: i2c: ov5647: Support V4L2_CID_PIXEL_RATE media: i2c: ov5467: Fixup error path to release mutex media: i2c: ov5647: Add support for g_selection to reflect cropping/binning media: ov5647: change defaults to better match raw camera applications. media: ov5647: Add extra 10-bit sensor modes. media: ov5647: Add V4L2 controls for analogue gain, exposure and AWB media: ov5647: Add basic support for multiple sensor modes. media: ov5647: Fix return codes from ov5647_write/ov5647_read functions. bcm2835-dma: Add proper 40-bit DMA support staging: vchiq: Load bcm2835_isp driver from vchiq media: uapi: v4l-ctrls: Add CID base for the bcm2835-isp driver media: uapi: v4l2-core: Add ISP statistics output V4L2 fourcc type media: imx219: Advertise embedded data node on media pad 1 media: uapi: Add MEDIA_BUS_FMT_SENSOR_DATA media bus format media: uapi: v4l2-core: Add sensor ancillary data V4L2 foucc type. driver: char: rpivid: Don't map more than wanted spi: Force CS_HIGH if GPIO descriptors are used driver: char: rpivid: Remove legacy name support drm: Checking of the pitch is only valid for linear formats dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings dt-bindings: clock: Add a binding for the RPi Firmware clocks mmc: sdhci: Silence MMC warnings staging: media: Add Raspberry Pi V4L2 H265 decoder media: dt-bindings: media: Add binding for the Raspberry PI HEVC decoder media: v4l2-mem2mem: allow request job buffer processing after job finish media: videodev2.h: Add a format for column YUV4:2:0 modes media: uapi: Add hevc ctrls for WPP decoding media: hevc_ctrls: Add slice param dependent slice segment media: uapi: hevc: Add segment address field media: uapi: hevc: Add scaling matrix control drm/fourcc: Add packed 10bit YUV 4:2:0 format bcmgenet: Disable skip_umac_reset by default Kbuild: Allow .dtbo overlays to be built, adjust. dt-bindings: pci: Add DT docs for Brcmstb PCIe device of: overlay: Correct symbol path fixups video: fbdev: bcm2708_fb: Use common compat header drivers: char: vcio: Use common compat header pinctrl: bcm2835: Accept fewer than expected IRQs pinctrl: bcm2835: Change init order for gpio hogs pinctrl: bcm2835: Remove gpiochip on error staging: vchiq_arm: Give vchiq children DT nodes Initialise rpi-firmware before clk-bcm2835 ARM: bcm: Backport BCM2711 support from upstream staging: vchiq: Use the old dma controller for OF config on platform devices staging: vchiq_arm: Set up dma ranges on child devices drm/v3d: Set dma_mask as well as coherent_dma_mask clk-bcm2835: Disable v3d clock clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks v3d_gem: Kick the clock so firmware knows we are using firmware clock interface v3d_drv: Handle missing clock more gracefully net:phy:2711 Change the default ethernet LED actions net:phy:2711 Allow ethernet LED mode to be set via device tree net: bcmgenet: The second IRQ is optional staging: vchiq_arm: Register bcm2835-codec as a platform driver staging: vchiq_arm: Register vcsm-cma as a platform driver drm/v3d: Plug dma_fence leak drm/v3d: Suppress all but the first MMU error drm/v3d: Don't clear MMU control bits on exception media: i2c: Add a driver for the Infineon IRS1125 depth sensor dt-bindings: Add binding for the Infineon IRS1125 sensor Rename HDMI ALSA device names, check for enable state ARM: bcm: Switch board, clk and pinctrl to bcm2711 compatible kbuild: Allow .dtbo overlays to be built piecemeal drm/v3d: Delete pm_runtime support staging: bcm2835-camera: Add greyworld AWB mode v4l2: Add a Greyworld AWB mode. media: dt-bindings: Add binding for the Sony IMX219 sensor arch/arm64: Add Revision, Serial, Model to cpuinfo arch/arm: Add model string to cpuinfo configs: arm64/bcm2711: Enable V3D xhci: Use more event ring segment table entries net: bcmgenet: Workaround #2 for Pi4 Ethernet fail Add HDMI1 facility to the driver. hid: usb: Add device quirks for Freeway Airmouse T3 and MX3 drivers: char: add chardev for mmap'ing the RPiVid control registers drm/v3d: Clock V3D down when not in use. drm/v3d: HACK: gut runtime pm for now. clk-bcm2835: Avoid null pointer exception i2c: bcm2835: Set clock-stretch timeout to 35ms xhci: add quirk for host controllers that don't update endpoint DCS drm/v3d: Hook up the runtime PM ops. drm/v3d: Skip MMU flush if the device is currently off. drm/v3d: Add support for 2711. arm: bcm2835: Add bcm2838 compatible string. usbhid: call usb_fixup_endpoint after mangling intervals xhci: implement xhci_fixup_endpoint for interval adjustments usb: add plumbing for updating interrupt endpoint interval state clk: bcm2835: Allow reparenting leaf clocks while they're running. clk: bcm2835: Add support for setting leaf clock rates while running. soc: bcm: bcm2835-pm: Add support for 2711. clk-bcm2835: Don't wait for pllh lock spi: bcm2835: enable shared interrupt support usb: xhci: Disable the XHCI 5 second timeout net: genet: enable link energy detect powerdown for external PHYs bcmgenet: Better coalescing parameter defaults bcmgenet: constrain max DMA burst length bcm2835-pcm.c: Support multichannel audio vchiq: Add 36-bit address support mmc: sdhci-iproc: Fix vmmc regulators on iProc hwrng: iproc-rng200: Add BCM2838 support arm: bcm2835: DMA can only address 1GB arm: bcm2835: Fix FIQ early ioremap w1: w1-gpio: Make GPIO an output for strong pullup staging: mmal-vchiq: Fix memory leak in error path staging: mmal-vchiq: Free the event context for control ports staging: mmal-vchiq: Update mmal_parameters.h with recently defined params staging: mmal_vchiq: Add in the Bayer encoding formats media: ov5647: Use gpiod_set_value_cansleep clk: clk-bcm2835: Use %zd when printing size_t staging: mmal-vchiq: Fix client_component for 64 bit kernel media: videobuf2: Allow exporting of a struct dmabuf staging: vc04_services: Support sending data to MMAL ports staging: mmal-vchiq: Add support for event callbacks. staging: mmal-vchiq: Avoid use of bool in structures media: tc358743: Return an appropriate colorspace from tc358743_set_fmt MAINTAINERS: Add entry for BCM2835 Unicam driver dt-bindings: Document BCM283x CSI2/CCP2 receiver media: videodev2: Add helper defines for printing FOURCCs media: adv7180: Add YPrPb support for ADV7282M media: adv7180: Default to the first valid input media: tc358743: Check I2C succeeded during probe. media: tc358743: Add support for 972Mbit/s link freq. media: tc358743: fix connected/active CSI-2 lane reporting media: tc358743: Increase FIFO level to 374. media: ov5647: Add support for non-continuous clock mode media: ov5647: Add support for PWDN GPIO. media: ov5647: Add set_fmt and get_fmt calls. lan78xx: use default alignment for rx buffers rtc: rv3028: Add backup switchover mode support bcm2835-dma: Add support for per-channel flags lan78xx: EEE support is now a PHY property lan78xx: Debounce link events to minimize poll storm firmware: raspberrypi: Report the fw variant during probe net: lan78xx: Support auto-downshift to 100Mb/s Update issue templates (#2736) drivers: thermal: step_wise: avoid throttling at hysteresis temperature after dropping below it drivers: thermal: step_wise: add support for hysteresis sc16is7xx: Don't spin if no data received firmware: raspberrypi: Add backward compatible get_throttled hwmon: raspberrypi: Prevent voltage low warnings from filling log cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT Add rpi-poe-fan driver lan78xx: Move enabling of EEE into PHY init code brcmfmac: Re-enable firmware roaming support net: lan78xx: Disable TCP Segmentation Offload (TSO) of: configfs: Use of_overlay_fdt_apply API call irqchip: irq-bcm2835: Calc. FIQ_START at boot-time firmware/raspberrypi: Notify firmware of a reboot Add ability to export gpio used by gpio-poweroff hid: Reduce default mouse polling interval to 60Hz lan78xx: Read initial EEE status from DT added capture_clear option to pps-gpio via dtoverlay (#2433) i2c-gpio: Also set bus numbers from reg property raspberrypi-firmware: Export the general transaction function. ARM: Activate FIQs to avoid __irq_startup warnings dwc-otg: FIQ: Fix "bad mode in data abort handler" ARM: bcm2835: Set Serial number and Revision cgroup: Disable cgroup "memory" by default AXI performance monitor driver (#2222) cache: export clean and invalidate ARM64: Force hardware emulation of deprecated instructions. ARM64: Round-Robin dispatch IRQs between CPUs. config: Add default configs hci_h5: Don't send conf_req when ACTIVE brcm: adds support for BCM43341 wifi OF: DT-Overlay configfs interface bcm2835-virtgpio: Virtual GPIO driver rpi_display: add backlight driver and overlay Fixes a problem when module probes before i2c module is available Add support for all the downstream rpi sound card drivers mfd: Add Raspberry Pi Sense HAT core driver gpio-poweroff: Allow it to work on Raspberry Pi Improve __copy_to_user and __copy_from_user performance Added Device IDs for August DVB-T 205 BCM270x_DT: Add pwr_led, and the required "input" trigger BCM2708: Add core Device Tree support firmware: bcm2835: Support ARCH_BCM270x char: broadcom: Add vcio module Add Chris Boot's i2c driver Add SMI driver Add /dev/gpiomem device for rootless user GPIO access vc_mem: Add vc_mem driver for querying firmware memory addresses Adding bcm2835-sdhost driver, and an overlay to enable it MMC: added alternative MMC driver dmaengine: Add support for BCM2708 Speed up console framebuffer imageblit function fbdev: add FBIOCOPYAREA ioctl Pulled in the multi frame buffer support from the Pi3 repo bcm2708 framebuffer driver Add dwc_otg driver Main bcm2708/bcm2709 linux port pinctrl-bcm2835: Set base to 0 give expected gpio numbering tty: amba-pl011: Avoid rare write-when-full error tty: amba-pl011: Add un/throttle support tty: amba-pl011: Make TX optimisation conditional amba_pl011: Add cts-event-workaround DT property amba_pl011: Insert mb() for correct FIFO handling amba_pl011: Round input clock up amba_pl011: Don't use DT aliases for numbering lan78xx: Enable LEDs and auto-negotiation irqchip: irq-bcm2836: Remove regmap and syscon use mm: Remove the PFN busy warning i2c: bcm2835: Add debug support Update vfpmodule.c sound: Demote deferral errors to INFO level clk-bcm2835: Read max core clock from firmware clk-bcm2835: Add claim-clocks property clk-bcm2835: Mark used PLLs and dividers CRITICAL bcm2835-rng: Avoid initialising if already enabled Register the clocks early during the boot process, so that special/critical clocks can get enabled early on in the boot process avoiding the risk of disabling a clock, pll_divider or pll when a claiming driver fails to install propperly - maybe it needs to defer. bcm: Make RASPBERRYPI_POWER depend on PM reboot: Use power off rather than busy spinning when halt is requested watchdog: bcm2835: Support setting reboot partition rtc: Add SPI alias for pcf2123 driver firmware: Updated mailbox header dmaengine: bcm2835: Load driver early and support legacy API spi: spidev: Completely disable the spidev warning irqchip: irq-bcm2835: Add 2836 FIQ support irqchip: bcm2835: Add FIQ support irq-bcm2836: Avoid "Invalid trigger warning" Protect __release_resource against resources without parents Allow mac address to be set in smsc95xx smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default smsx95xx: fix crimes against truesize Revert "mailbox: avoid timer start from callback" Revert "spi: spidev: Fix CS polarity if GPIO descriptors are used" Revert "staging: bcm2835-audio: Drop DT dependency" Revert "rtc: pcf8523: properly handle oscillator stop bit" arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1914015/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp