This bug was fixed in the package linux-oem-5.13 - 5.13.0-1009.10
---------------
linux-oem-5.13 (5.13.0-1009.10) focal; urgency=medium
* CVE-2021-33909
- SAUCE: seq_file: Disallow extremely large seq buffer allocations
linux-oem-5.13 (5.13.0-1007.7) focal; urgency=medium
* focal/linux-oem-5.13: 5.13.0-1007.7 -proposed tracker (LP: #1934979)
* intel_pmc_core driver is not probed on ADL (LP: #1934660)
- SAUCE: platform/x86: intel_pmc_core: Add Alderlake support to pmc_core
driver
- SAUCE: platform/x86: intel_pmc_core: Add Latency Tolerance Reporting (LTR)
support to Alder Lake
- SAUCE: platform/x86: intel_pmc_core: Add Alder Lake low power mode support
for pmc_core
- SAUCE: platform/x86: intel_pmc_core: Add GBE Package C10 fix for Alder
Lake
PCH
linux-oem-5.13 (5.13.0-1006.6) focal; urgency=medium
* focal/linux-oem-5.13: 5.13.0-1006.6 -proposed tracker (LP: #1934490)
* Replace AMD nvme workaround from oem-5.10 with upstream version
(LP: #1930719)
- ACPI: Check StorageD3Enable _DSD property in ACPI code
- ACPI: Add quirks for AMD Renoir/Lucienne CPUs to force the D3 hint
* Add Thunderbolt support for Intel Alder Lake (LP: #1934240)
- thunderbolt: Add support for Intel Alder Lake
* Fix Ethernet not working by hotplug - RTL8106E (LP: #1930645)
- SAUCE: r8169: Use PHY_POLL when RTL8106E enable ASPM
* Realtek USB hubs in Dell WD19SC/DC/TB fail to work after exiting s2idle
(LP: #1928242)
- USB: Verify the port status when timeout happens during port suspend
- Revert "USB: Add reset-resume quirk for WD19's Realtek Hub"
* USB Type-C hotplug event not handled properly in TGL-H system during s2idle
(LP: #1931072)
- drm/i915: Force a TypeC PHY disconnect during suspend/shutdown
* Miscellaneous Ubuntu changes
- [Config] Sync annotations and config with master
[ Ubuntu: 5.13.0-11.11 ]
* impish/linux: 5.13.0-11.11 -proposed tracker (LP: #1933854)
* Packaging resync (LP: #1786013)
- [Packaging] update variants
* Support builtin revoked certificates (LP: #1932029)
- [Packaging] build canonical-revoked-certs.pem from branch/arch certs
- [Packaging] Revoke 2012 UEFI signing certificate as built-in
- [Config] Configure CONFIG_SYSTEM_REVOCATION_KEYS with revoked keys
* Miscellaneous Ubuntu changes
- [Packaging] Change source package name to linux
* Miscellaneous upstream changes
- mm/page_alloc: Correct return value of populated elements if bulk array is
populated
[ Ubuntu: 5.13.0-10.10 ]
* impish/linux-unstable: 5.13.0-10.10 -proposed tracker (LP: #1933795)
* Pixel format change broken for Elgato Cam Link 4K (LP: #1932367)
- media: uvcvideo: Fix pixel format change for Elgato Cam Link 4K
* initramfs-tools & kernel: use zstd as the default compression method
(LP: #1931725)
- s390/decompressor: correct BOOT_HEAP_SIZE condition
- s390/boot: add zstd support
- [Packaging] use ZSTD to compress s390 kernels
* Miscellaneous Ubuntu changes
- SAUCE: selftests: tls: fix chacha+bidir tests
- SAUCE: selftests: icmp_redirect: support expected failures
- [Config] update configs and annotations after rebase to 5.13
* Miscellaneous upstream changes
- tls: prevent oversized sendfile() hangs by ignoring MSG_MORE
* Rebase to v5.13
-- Thadeu Lima de Souza Cascardo <[email protected]> Fri, 16 Jul
2021 13:51:37 -0300
** Changed in: linux-oem-5.13 (Ubuntu Focal)
Status: Fix Committed => Fix Released
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2021-33909
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-oem-5.10 in Ubuntu.
https://bugs.launchpad.net/bugs/1928242
Title:
Realtek USB hubs in Dell WD19SC/DC/TB fail to work after exiting
s2idle
Status in HWE Next:
Fix Released
Status in linux package in Ubuntu:
Confirmed
Status in linux-oem-5.10 package in Ubuntu:
Invalid
Status in linux-oem-5.13 package in Ubuntu:
Invalid
Status in linux source package in Focal:
Fix Released
Status in linux-oem-5.10 source package in Focal:
Fix Released
Status in linux-oem-5.13 source package in Focal:
Fix Released
Status in linux source package in Groovy:
Fix Released
Status in linux-oem-5.10 source package in Groovy:
Invalid
Status in linux-oem-5.13 source package in Groovy:
Invalid
Status in linux source package in Hirsute:
Fix Released
Status in linux-oem-5.10 source package in Hirsute:
Invalid
Status in linux-oem-5.13 source package in Hirsute:
Invalid
Status in linux source package in Impish:
Confirmed
Status in linux-oem-5.10 source package in Impish:
Invalid
Status in linux-oem-5.13 source package in Impish:
Invalid
Bug description:
[SRU Justification]
[Impact]
All of 3 different WD19(TB/SC/DC) docks have 3 Type-A ports and 2 Type-C
ports, and there're highspeed Hubs(0bda:5487 and its substream hub 0bda:5413)
and Superspeed Hubs (0bda:0487 and its downstream hub 0bda:0413). In the bug
description below, we will refer the 2 highspeed hubs as Hub A and Hub A.3, and
the 2 superspeed hubs as Hub B and Hub B.3. All devices connected via either
Type-A or Type-C ports will connect to either Hub A.3 or Hub B.3. If we connect
a wakup enabled device (keyboard) to a Type-A port, the Hub A.3 will fail to
activate after exiting s2idle and all downstream devices will not be detected.
If we have a superspeed device connected to other Type-A port in addition to
the keyboard, this superspeed device actually connects to Hub B.3, and the Hub
B.3 will also fails to work after exiting s2idle. If the wakeup enabled device
connects via Type-C port, there's no such problem.
As a summary, a wakeup enabled device connect to Type-A port will
cause the failure of Hub A.3 and Hub B.3. Hub B.3 only fails when a
wakeup enabled device and a superspeed device both connect via Type-A
port.
[Fix]
Before the resume failure, the upstream hub(Hub A or B) will hit the timeout
problem while doing SetPortFeature(PORT_SUSPEND) to the port of the downstream
hub (Hub A.3 or Hub B.3). However, the PORT_SUSPEND bit of the wPortStatus is
actually turned on for the Hub A.3, we simply need to make the kernel believe
it's already suspended. Then the ClearPortFeature will be done during resume
and the problem will go away.
The Hub B.3 will be tricky. The PORT_SUSPEND bit is not on after the
suspend timeout, but it needs the ClearPortFeature(PORT_SUSPEND) for
Hub B.3 to avoid resume failure. It doesn't comply with the USB spec
so it's hard to create a generic fix for it. Because it only happens
when timeout happens on suspending Hub A.3 and there's a superspeed
device connecting to Type-A port, we choose to leave it as-is and try
to address it in the future.
[Test Case]
1. Make sure that the WD19 connects to the laptop
2. Connect USB keyboard/mouse to USB Type-A ports.
3. Suspend the system
4. Press the Enter key or power button to wake up the system
5. Check if the USB keyboard/mouse are still working
Repeat 4 and 5 for > 10 times w/o losing any USB devices.
[Where problems could occur]
A wakeup enabled device (keyboard) connect to Type-A port will cause the
failure of Hub A.3 and Hub B.3 during resume. Hub B.3 only fails when a wakeup
enabled device and a superspeed device both connect via Type-A port. All
devices connects to Hub A.3 (and B.3 if superspeed device connect via Type-A
port) will be lost after resume.
[Regression Potential]
Minimum. The fix is only triggered when timeout happens during USB port
suspend and it follows the standard USB protocol to do either resume or
reset_resume.
========== Original Bug Description ==========
● Summary
Plug in USB mouse and USB keyboard to WD19/WD19DC USB ports near LAN port.
Plug dock into SUT and check USB keyboard and mouse work. SUT enter suspend.
After 1 min resume SUT, check USB keyboard/mouse function. Sometimes USB
keyboard/mouse no function.
Isolation:
1. VP on UMA and Discrete
2. When issue occur, both front and back port on WD19 can't work using USB
keyboard/mouse but USB Key.
● Reproduce Steps
1.Plug in USB mouse and USB keyboard to WD19/WD19DC USB ports near LAN port.
2.Plug dock into SUT and check USB keyboard and mouse work.
3. SUT enter suspend.
4.After 1 min, resume SUT and check USB keyboard/mouse function.
5.Sometimes USB keyboard/mouse no function.
● Results
○ Expected Result
USB mouse or keyboard on dock can use after suspend
○ Actual Result
USB mouse or keyboard on dock sometimes no function after suspend
● Additional Information
○ Test Vault ID：60943.011
○ SKU：Broadmoor Latitude5421
○ BIOS Version：0.3.21
○ Image/Manifest：
dell-bto-focal-fossa-pidgeot-14-X79-20210106-3.iso
dell-bto-focal-fossa-pidgeot-14-X81-20210121-6.iso
○ CPU：TGL ES
○ GPU：Intel pGFX 2020
○ Failure rate：F/R: 2/2 units, 1/10 times
○ WD19 dock, Dock DFU: 1.0.15
---
ProblemType: Bug
ApportVersion: 2.20.11-0ubuntu27.16
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: u 2632 F.... pulseaudio
/dev/snd/controlC0: u 2632 F.... pulseaudio
CasperMD5CheckResult: skip
CurrentDesktop: ubuntu:GNOME
DistributionChannelDescriptor:
# This is the distribution channel descriptor for the OEM CDs
# For more information see
http://wiki.ubuntu.com/DistributionChannelDescriptor
canonical-oem-somerville-focal-amd64-20200502-85+fossa-pidgey+X90
DistroRelease: Ubuntu 20.04
InstallationDate: Installed on 2021-04-20 (22 days ago)
InstallationMedia: Ubuntu 20.04 "Focal" - Build amd64 LIVE Binary
20200502-05:58
MachineType: Dell Inc. Precision 5560
Package: linux-oem-5.10
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.10.0-1023-oem
root=UUID=0a51d1e3-2a97-46b9-87cf-912821ab4aa0 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 5.10.0-1023.24-oem 5.10.25
RelatedPackageVersions:
linux-restricted-modules-5.10.0-1023-oem N/A
linux-backports-modules-5.10.0-1023-oem N/A
linux-firmware 1.187.10
Tags: focal
Uname: Linux 5.10.0-1023-oem x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 04/01/2021
dmi.bios.release: 0.4
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 0.4.4
dmi.board.vendor: Dell Inc.
dmi.chassis.asset.tag: 7654321
dmi.chassis.type: 10
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvr0.4.4:bd04/01/2021:br0.4:svnDellInc.:pnPrecision5560:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct10:cvr:
dmi.product.family: Precision
dmi.product.name: Precision 5560
dmi.product.sku: 0A62
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1928242/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
