This bug was fixed in the package linux-oem-5.13 - 5.13.0-1019.23
---------------
linux-oem-5.13 (5.13.0-1019.23) focal; urgency=medium
* focal/linux-oem-5.13: 5.13.0-1019.23 -proposed tracker (LP:
#1949076)
* Fail to detect audio output from external monitor (LP: #1948767)
- ALSA: hda: intel: Allow repeatedly probing on codec configuration errors
* Intel I225-IT ethernet controller: igc: probe of 0000:02:00.0 failed with
error -1 (LP: #1945576)
- igc: Remove _I_PHY_ID checking
- igc: Remove phy->type checking
* Fix Screen freeze after resume from suspend with iGPU [1002:6987]
(LP: #1949050)
- drm/amdgpu: reenable BACO support for 699F:C7 polaris12 SKU
- drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
- drm/amdgpu: Fix crash on device remove/driver unload
* Need support of Qualcomm WCN6856 (LP: #1939528)
- Revert "UBUNTU: SAUCE: Bluetooth: btusb: Add support using different nvm
for
variant WCN6855 controller"
- Revert "UBUNTU: SAUCE: cfg80211: save power spectral density(psd) of
regulatory rule"
- Revert "UBUNTU: SAUCE: cfg80211: add definition for 6 GHz power spectral
density(psd)"
- Revert "UBUNTU: SAUCE: ath11k: set correct NL80211_FEATURE_DYNAMIC_SMPS
for
WCN6855"
- Revert "mac80211: save transmit power envelope element and power
constraint"
- Revert "mac80211: add parse regulatory info in 6 GHz operation
information"
- Revert "ieee80211: add power type definition for 6 GHz"
- Revert "mac80211: use ieee802_11_parse_elems() in
ieee80211_prep_channel()"
- Revert "mac80211: always allocate struct ieee802_11_elems"
- Revert "mac80211: mlme: find auth challenge directly"
- Revert "mac80211: move CRC into struct ieee802_11_elems"
- Revert "mac80211: mesh: clean up rx_bcn_presp API"
- Revert "ath11k: support SMPS configuration for 6 GHz"
- Revert "ath11k: add 6 GHz params in peer assoc command"
- Revert "ieee80211: Add new A-MPDU factor macro for HE 6 GHz peer caps"
- Revert "ath11k: copy cap info of 6G band under WMI_HOST_WLAN_5G_CAP for
WCN6855"
- Revert "ath11k: enable 6G channels for WCN6855"
- Revert "ath11k: re-enable ht_cap/vht_cap for 5G band for WCN6855"
- Revert "ath11k: fix survey dump collection in 6 GHz"
- Revert "ath11k: fix packet drops due to incorrect 6 GHz freq value in rx
status"
- Revert "ath11k: add channel 2 into 6 GHz channel list"
- Revert "ath11k: qmi: avoid error messages when dma allocation fails"
- Revert "mac80211: parse transmit power envelope element"
- Revert "ieee80211: add definition for transmit power envelope element"
- Revert "ieee80211: add definition of regulatory info in 6 GHz operation
information"
- Revert "mac80211: notify driver on mgd TX completion"
- Revert "ath11k: don't call ath11k_pci_set_l1ss for WCN6855"
- Revert "ath11k: add support for WCN6855"
- Revert "ath11k: add support to get peer id for WCN6855"
- Revert "ath11k: setup WBM_IDLE_LINK ring once again"
- Revert "ath11k: setup REO for WCN6855"
- Revert "ath11k: add dp support for WCN6855"
- Revert "ath11k: add hw reg support for WCN6855"
-- Timo Aaltonen <[email protected]> Thu, 28 Oct 2021
16:00:01 +0300
** Changed in: linux-oem-5.13 (Ubuntu Focal)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-oem-5.14 in Ubuntu.
https://bugs.launchpad.net/bugs/1948767
Title:
Fail to detect audio output from external monitor
Status in HWE Next:
New
Status in linux package in Ubuntu:
Incomplete
Status in linux-oem-5.13 package in Ubuntu:
New
Status in linux-oem-5.14 package in Ubuntu:
New
Status in linux source package in Focal:
Incomplete
Status in linux-oem-5.13 source package in Focal:
Fix Released
Status in linux-oem-5.14 source package in Focal:
Fix Committed
Status in linux source package in Hirsute:
Fix Committed
Status in linux-oem-5.13 source package in Hirsute:
Invalid
Status in linux-oem-5.14 source package in Hirsute:
Invalid
Status in linux source package in Impish:
Fix Committed
Status in linux-oem-5.13 source package in Impish:
Invalid
Status in linux-oem-5.14 source package in Impish:
Invalid
Bug description:
[SRU Justification]
[Impact]
Few recent AMD systems shows "snd_hda_intel 0000:00:1f.3: azx_get_response
timeout" and fail to detect the HDMI/DP audio output device when connects to
external monitor. It will work magically when re-loading the driver.
[Fix]
Backport the upstream fix c0f1886de7e1 ("Allow repeatedly probing on codec
configuration errors) from 5.15.0 rc. It adds the capability for retrying the
probe upon codec probe errors on the certain AMD platforms.
[Test]
1. Connect the external monitor to particular affected AMD systems with HDMI
or DisplayPort.
2. Go to Audio Settings to check if the HDMI/DP audio output device exist or
not.
[Where problems could occur]
Should be low risk, it adds the chance for retrying codec probe and won't
affect machines which used to work.
========== Original Bug Description ==========
Can not detect DP audio output
[Steps to reproduce]
1) install dell-bto-focal-fossa-grimer-rkl-X72-20210929-8.iso and boot into OS
2) switch to on-demand mode
3) connect an external monitor via DP Port
4) check sound setting --> Output Device
5) switch to performance mode
6) check sound setting --> Output Device
[Expected result]
System can detect DP audio output when external monitor connected
[Actual result]
Can not detect DP audio output
This issue can be reproduce in on-demand and performance mode.
[Failure rate]
1/1
[Additional information]
CID: 202101-28624
SKU: PRH-DVT-C6
Image: canonical-oem-somerville-focal-amd64-20200502-85+fossa-grimer-rkl+X72
system-manufacturer: Dell Inc.
system-product-name: OptiPlex 5490 AIO
bios-version: 1.4.1
CPU: 11th Gen Intel(R) Core(TM) i7-11700 @ 2.50GHz (16x)
GPU: 00:02.0 VGA compatible controller [0300]: Intel Corporation Device
[8086:4c8a] (rev 04)
01:00.0 3D controller [0302]: NVIDIA Corporation Device [10de:1f99] (rev a1)
kernel-version: 5.14.0-2006-oem
---
ProblemType: Bug
ApportVersion: 2.20.11-0ubuntu27.16
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: gdm 1081 F.... pulseaudio
u 1592 F.... pulseaudio
CasperMD5CheckResult: skip
DistributionChannelDescriptor:
# This is the distribution channel descriptor for the OEM CDs
# For more information see
http://wiki.ubuntu.com/DistributionChannelDescriptor
canonical-oem-somerville-focal-amd64-20200502-85+fossa-proposed-release+X88
DistroRelease: Ubuntu 20.04
InstallationDate: Installed on 2021-10-27 (1 days ago)
InstallationMedia: Ubuntu 20.04 "Focal" - Build amd64 LIVE Binary
20200502-05:58
MachineType: Dell Inc. OptiPlex 5490 AIO
NonfreeKernelModules: nvidia_modeset nvidia
Package: linux (not installed)
ProcEnviron:
TERM=xterm-256color
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.10.0-1020-oem
root=UUID=d0e48268-091a-436d-8b79-2420e385c5c8 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 5.10.0-1020.21-oem 5.10.25
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
linux-restricted-modules-5.10.0-1020-oem N/A
linux-backports-modules-5.10.0-1020-oem N/A
linux-firmware 1.187.10
Tags: focal
Uname: Linux 5.10.0-1020-oem x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: N/A
_MarkForUpload: True
dmi.bios.date: 08/17/2021
dmi.bios.release: 1.4
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 1.4.1
dmi.board.vendor: Dell Inc.
dmi.chassis.type: 13
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvr1.4.1:bd08/17/2021:br1.4:svnDellInc.:pnOptiPlex5490AIO:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct13:cvr:
dmi.product.family: OptiPlex
dmi.product.name: OptiPlex 5490 AIO
dmi.product.sku: 0A48
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1948767/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
