let's just focus on stock linux for this
** Changed in: linux-oem-5.10 (Ubuntu)
Status: New => Won't Fix
** Changed in: linux-meta-oem-5.6 (Ubuntu)
Status: New => Invalid
** Changed in: linux-oem-5.13 (Ubuntu)
Status: New => Won't Fix
** Changed in: linux-oem-5.14 (Ubuntu)
Status: New => Won't Fix
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-oem-5.14 in Ubuntu.
https://bugs.launchpad.net/bugs/1922334
Title:
External monitor does not wake up on Titan Ridge laptops when docked
(9500, TB16)
Status in Dell Sputnik:
New
Status in linux package in Ubuntu:
In Progress
Status in linux-meta-oem-5.6 package in Ubuntu:
Invalid
Status in linux-oem-5.10 package in Ubuntu:
Won't Fix
Status in linux-oem-5.13 package in Ubuntu:
Won't Fix
Status in linux-oem-5.14 package in Ubuntu:
Won't Fix
Bug description:
I've recently upgraded my workhorse from XPS 9560 (2016) to a newer
generation XPS 9500 (2020) and ran into several things that feel like
regressions, but are probably related to hardware changes. This is one
of them.
tl;dr:
When using XPS 9500 with a TB16 dock and an external monitor (Benq EX2780Q)
connected to the dock via USB-C to USB-C (DP alternate mode), most of the time
the monitor fails to wake up after going blank.
details:
Simplest way to reproduce is for hit Super+L, wait for the monitor to
properly go in standby, then type something in or move the mouse to wake it up.
8 times out of 10 it does not wake up when using XPS 9500. Most of the time
this can be fixed by power cycling the monitor, however this has a seemingly
random chance of triggering two other issues:
1. The system to lose sight of the monitor for a brief period of time, which
sometimes causes it to hang with a black screen and needs some combination of
restarting the monitor, the dock, and the laptop, because there is a separate
USB issue making hot-plugging unusable.
2. The monitor itself gets stuck in a weird standby state where it stops
reacting to button presses and I need to hold the power button a bit longer for
it to sort of hard reset?
Notably, it wakes up fine every time when using XPS 9560 or Precision
5520 in the same setup which I have been using for ages.
This becomes particularly troublesome when screens go into short-lived
standby during boot: after the Dell logo, after entering the LUKS
password, after logging in. Each of these points has a chance of
triggering the bug, because it looks like there is some sort of mode
change and waking signal submission happening between them that
triggers it. I had to disable screen timeout as a temporary workaround
to be able to work on this system at all without having to play
"monitor wake lottery" every time I go brew a cuppa. The workaround at
boot time is to either re-roll the lottery, or boot with the dock
connected and lid open, then close the lid and keep working from
there.
The dock, the monitor, all USB peripherals are the same in both cases
- it's literally just the TB16 cable plugged into a different laptop.
I have attempted 5.8 Ubuntu generic, 5.6 OEM (-20.04) and 5.10 OEM
(-20.04b and -20.04-edge) kernels on the 9500 with same results. I
have attempted disabling USB autosuspend via a GRUB kernel parameter
to usbcore. I have attempted both NVidia and Intel GPUs. I have
attempted playing with BIOS settings: wake on dell usb-c docks,
disable early sign of life for both checkboxes, disabling SGX and SMM,
checking all 3 boxes for Thunderbolt and switching off Thunderbolt
security. None of these make a noticeable difference.
Since it was fine with 9560, 5520 and a friend with a 9570 has no
issues either, my gut feeling is that this is due to the upgrade from
Alpine Ridge to a Titan Ridge Thunderbolt controller that happened in
this generation - something wrong with the driver, or the firmware may
have missed some of the "lessons learned" in Alpine Ridge and caused
this regression. That would also make it applicable to 9300, which has
a "developer edition" option under Project Sputnik and several reports
of the same problem scattered across the internet:
https://www.dell.com/community/XPS/XPS-13-9300-with-WD19TB-External-display-not-coming-on-after/td-p/7676922
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1889342 (may be a
duplicate, but for WD19TB dock on 9300, so may be slightly different too)
https://www.reddit.com/r/linuxquestions/comments/ka0w2j/monitor_doesnt_wake_from_sleep/
etc etc. Those reports suggest high bandwidth usage sometimes affects
it, so it's worth noting that my external monitor is a 1440p 144Hz one
that uses tons of bandwidth indeed.
The only hint in terms of logs seems to be this message in dmesg that
I see when power cycling the monitor and getting back into the system:
[ 250.777684] pcieport 0000:09:04.0: pciehp: Slot(0-1): Card not present
[ 250.777695] xhci_hcd 0000:0b:00.0: can't change power state from D3cold to
D0 (config space inaccessible)
[ 250.778293] xhci_hcd 0000:0b:00.0: can't change power state from D3hot to
D0 (config space inaccessible)
[ 250.778336] xhci_hcd 0000:0b:00.0: Controller not ready at resume -19
[ 250.778340] xhci_hcd 0000:0b:00.0: PCI post-resume error -19!
[ 250.778343] xhci_hcd 0000:0b:00.0: HC died; cleaning up
[ 250.778374] xhci_hcd 0000:0b:00.0: remove, state 4
[ 250.778380] usb usb6: USB disconnect, device number 1
[ 250.778895] xhci_hcd 0000:0b:00.0: USB bus 6 deregistered
[ 250.778905] xhci_hcd 0000:0b:00.0: remove, state 4
[ 250.778910] usb usb5: USB disconnect, device number 1
[ 250.779396] xhci_hcd 0000:0b:00.0: Host halt failed, -19
[ 250.779400] xhci_hcd 0000:0b:00.0: Host not accessible, reset failed.
[ 250.779484] xhci_hcd 0000:0b:00.0: USB bus 5 deregistered
And there was one time when the i915 driver crashed in the process of
power cycling the external monitor, which I could not reproduce. Just
in case, I attached the kernel logs for it too.
System config:
XPS 9500, i7, 32GB RAM
BIOS 1.6.1, TB3 firmware NVM60
Ubuntu 20.04.02 LTS, kernels 5.6-oem, 5.8-generic, 5.10-oem (same behaviour)
TB16 dock firmware 1.0.4 (MST 3.12.02)
---
ProblemType: Bug
ApportVersion: 2.20.11-0ubuntu27.16
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC4: gboiko 2233 F.... pulseaudio
/dev/snd/controlC3: gboiko 2233 F.... pulseaudio
/dev/snd/controlC1: gboiko 2233 F.... pulseaudio
/dev/snd/controlC0: gboiko 2233 F.... pulseaudio
CasperMD5CheckResult: skip
CurrentDesktop: ubuntu:GNOME
DistroRelease: Ubuntu 20.04
InstallationDate: Installed on 2021-03-31 (6 days ago)
InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64
(20210209.1)
MachineType: Dell Inc. XPS 15 9500
NonfreeKernelModules: nvidia_modeset nvidia
Package: linux-meta-oem-5.6
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.6.0-1052-oem
root=/dev/mapper/vgubuntu-root ro net.ifnames=0 biosdevname=0 ipv6.disable=1
quiet splash pcie_aspm=off vt.handoff=7
ProcVersionSignature: Ubuntu 5.6.0-1052.56-oem 5.6.19
RelatedPackageVersions:
linux-restricted-modules-5.6.0-1052-oem N/A
linux-backports-modules-5.6.0-1052-oem N/A
linux-firmware 1.187.10
Tags: focal
Uname: Linux 5.6.0-1052-oem x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 12/24/2020
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 1.6.1
dmi.board.name: 0RHXRG
dmi.board.vendor: Dell Inc.
dmi.board.version: A03
dmi.chassis.type: 10
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvr1.6.1:bd12/24/2020:svnDellInc.:pnXPS159500:pvr:rvnDellInc.:rn0RHXRG:rvrA03:cvnDellInc.:ct10:cvr:
dmi.product.family: XPS
dmi.product.name: XPS 15 9500
dmi.product.sku: 097D
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/dell-sputnik/+bug/1922334/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
