I ran "apport-collect 1958911"
and
I tried follow command.
~$ sudo nmcli general logging level TRACE
~$ nmcli device wifi connect elecom-b3306f password foobarcorrectpass
エラー: 接続のアクティベーションに失敗しました: (7) シークレットが必要でしたが入力されませんでした.
~$ nmcli device wifi connect elecom-b3306f password foobarcorrectpass
エラー: 接続のアクティベーションに失敗しました: (7) シークレットが必要でしたが入力されませんでした.
~$ nmcli device wifi
IN-USE BSSID SSID MODE CHAN RATE
SIGNAL BARS SECURITY
04:AB:18:xx:xx:xx elecom-b3306f インフラ 10 270 Mbit/s 92
▂▄▆█ WPA2
xx:xx:xx:xx:xx:xx foo インフラ 2 270 Mbit/s 69
▂▄▆_ WPA2
xx:xx:xx:xx:xx:xx foofoo インフラ 1 130 Mbit/s 27
▂___ WPA1 WPA2
xx:xx:xx:xx:xx:xx foofoofoo インフラ 1 65 Mbit/s 27
▂___ WPA2
xx:xx:xx:xx:xx:xx foofoofoofoofoofoo インフラ 10 130 Mbit/s 22
▂___ WPA2
xx:xx:xx:xx:xx:xx bar インフラ 1 195 Mbit/s 20
▂___ WPA1 WPA2
xx:xx:xx:xx:xx:xx barbar インフラ 3 405 Mbit/s 19
▂___ WPA1 WPA2
xx:xx:xx:xx:xx:xx barbarbar インフラ 3 54 Mbit/s 19
▂___ WEP
xx:xx:xx:xx:xx:xx barbarbarbar インフラ 2 130 Mbit/s 17
▂___ WPA2
xx:xx:xx:xx:xx:xx barbarbarbarbar インフラ 9 130 Mbit/s 15
▂___ WPA2
Japanese message "シークレットが必要でしたが入力されませんでした." means "Secret is needed, but there
is not it."
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-firmware in Ubuntu.
https://bugs.launchpad.net/bugs/1958911
Title:
BCM4356 wifi chipset fail to connect
Status in linux-firmware package in Ubuntu:
New
Bug description:
My machine fails to connect wifi network.
I use Kubuntu 21.10.
Here are my machine's information.
lspci -vvnn | grep -A 9 Network
01:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4356
802.11ac Wireless Network Adapter [14e4:43ec] (rev 02)
Subsystem: Gemtek Technology Co., Ltd BCM4356 802.11ac Wireless
Network Adapter [17f9:0036]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 164
Region 0: Memory at 91800000 (64-bit, non-prefetchable) [size=32K]
Region 2: Memory at 91400000 (64-bit, non-prefetchable) [size=4M]
Capabilities: <access denied>
Kernel driver in use: brcmfmac
Kernel modules: brcmfmac
lshw
*-network
description: Wireless interface
product: BCM4356 802.11ac Wireless Network Adapter
vendor: Broadcom Inc. and subsidiaries
physical id: 0
bus info: pci@0000:01:00.0
logical name: wlan1
version: 02
And Ksystemlog says
2022/01/22 2:49 NetworkManager <info> [1642787376.6460] device (wlan1):
Activation: starting connection 'elecom-b3306f'
(81bdc1ee-e44b-4121-aab5-62f3395e399d)
2022/01/22 2:49 NetworkManager <info> [1642787376.6482] audit:
op="connection-activate" uuid="81bdc1ee-e44b-4121-aab5-62f3395e399d"
name="elecom-b3306f" pid=1168 uid=1000 result="success"
2022/01/22 2:49 NetworkManager <info> [1642787376.6486] device (wlan1): state
change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
2022/01/22 2:49 NetworkManager <info> [1642787376.6503] manager:
NetworkManager state is now CONNECTING
2022/01/22 2:49 NetworkManager <info> [1642787376.6512] device (wlan1): state
change: prepare -> config (reason 'none', sys-iface-state: 'managed')
2022/01/22 2:49 NetworkManager <info> [1642787376.6535] device (wlan1):
Activation: (wifi) access point 'elecom-b3306f' has security, but secrets are
required.
2022/01/22 2:49 NetworkManager <info> [1642787376.6536] device (wlan1): state
change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
2022/01/22 2:49 NetworkManager <info> [1642787376.6547]
sup-iface[039a263b9d4622b5,1,wlan1]: wps: type pbc start...
2022/01/22 2:49 wpa_supplicant wlan1: WPS-PBC-ACTIVE
2022/01/22 2:49 NetworkManager <info> [1642787376.7249] device (wlan1):
supplicant interface state: disconnected -> scanning
2022/01/22 2:49 NetworkManager <info> [1642787376.7251] device
(p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
2022/01/22 2:49 NetworkManager <info> [1642787376.7502] device (wlan1): state
change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
2022/01/22 2:49 NetworkManager <info> [1642787376.7523] device (wlan1): state
change: prepare -> config (reason 'none', sys-iface-state: 'managed')
2022/01/22 2:49 NetworkManager <info> [1642787376.7549] device (wlan1):
Activation: (wifi) connection 'elecom-b3306f' has security, and secrets exist.
No new secrets needed.
2022/01/22 2:49 NetworkManager <info> [1642787376.7564] Config: added 'ssid'
value 'elecom-b3306f'
2022/01/22 2:49 NetworkManager <info> [1642787376.7565] Config: added
'scan_ssid' value '1'
2022/01/22 2:49 NetworkManager <info> [1642787376.7565] Config: added
'bgscan' value 'simple:30:-70:86400'
2022/01/22 2:49 NetworkManager <info> [1642787376.7566] Config: added
'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
2022/01/22 2:49 NetworkManager <info> [1642787376.7566] Config: added 'psk'
value '<hidden>'
2022/01/22 2:49 NetworkManager <info> [1642787376.7853] device (wlan1):
supplicant interface state: scanning -> inactive
2022/01/22 2:49 NetworkManager <info> [1642787376.7870] device
(p2p-dev-wlan1): supplicant management interface state: scanning -> inactive
2022/01/22 2:49 wpa_supplicant wlan1: Trying to associate with SSID
'elecom-b3306f'
2022/01/22 2:49 NetworkManager <info> [1642787376.8465] device (wlan1):
supplicant interface state: inactive -> associating
2022/01/22 2:49 NetworkManager <info> [1642787376.8467] device
(p2p-dev-wlan1): supplicant management interface state: inactive -> associating
2022/01/22 2:49 wpa_supplicant wlan1: CTRL-EVENT-ASSOC-REJECT
bssid=00:00:00:00:00:00 status_code=16
2022/01/22 2:49 wpa_supplicant wlan1: CTRL-EVENT-SSID-TEMP-DISABLED id=0
ssid="elecom-b3306f" auth_failures=1 duration=10 reason=CONN_FAILED
2022/01/22 2:49 NetworkManager <info> [1642787377.4247] device (wlan1):
supplicant interface state: associating -> disconnected
2022/01/22 2:49 NetworkManager <info> [1642787377.4250] device
(p2p-dev-wlan1): supplicant management interface state: associating ->
disconnected
---
ProblemType: Bug
ApportVersion: 2.20.11-0ubuntu71
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: iwa 906 F.... pulseaudio
/dev/snd/controlC0: iwa 906 F.... pulseaudio
CasperMD5CheckResult: pass
CurrentDesktop: KDE
Dependencies:
DistroRelease: Ubuntu 21.10
InstallationDate: Installed on 2021-12-19 (36 days ago)
InstallationMedia: Kubuntu 21.10 "Impish Indri" - Release amd64 (20211012)
Lsusb:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 056e:4008 Elecom Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Lsusb-t:
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/7p, 480M
|__ Port 1: Dev 4, If 0, Class=Vendor Specific Class, Driver=r8188eu,
480M
MachineType: TOSHIBA dynabook Tab S80/B
Package: linux-firmware 1.201.3
PackageArchitecture: all
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.13.0-27-lowlatency
root=UUID=485e0b63-9e57-4e6e-9a5b-13d4e166edb2 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 5.13.0-27.29-lowlatency 5.13.19
RelatedPackageVersions:
linux-restricted-modules-5.13.0-27-lowlatency N/A
linux-backports-modules-5.13.0-27-lowlatency N/A
linux-firmware 1.201.3
StagingDrivers: r8188eu atomisp atomisp_ov2680 atomisp_gmin_platform
Tags: impish staging
Uname: Linux 5.13.0-27-lowlatency x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm audio cdrom dip lpadmin lxd plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 11/22/2016
dmi.bios.release: 1.80
dmi.bios.vendor: TOSHIBA
dmi.bios.version: 1.80
dmi.board.asset.tag: ABCDEF
dmi.board.name: Cherry Trail CR
dmi.board.vendor: TOSHIBA
dmi.board.version: 1.00
dmi.chassis.asset.tag: ABCDEF
dmi.chassis.type: 10
dmi.chassis.vendor: TOSHIBA
dmi.chassis.version: PS80BSGK7L7ADJX
dmi.ec.firmware.release: 1.10
dmi.modalias:
dmi:bvnTOSHIBA:bvr1.80:bd11/22/2016:br1.80:efr1.10:svnTOSHIBA:pndynabookTabS80/B:pvrPS80BSGK7L7ADJX:rvnTOSHIBA:rnCherryTrailCR:rvr1.00:cvnTOSHIBA:ct10:cvrPS80BSGK7L7ADJX:skuPDW0KN:
dmi.product.family: PDW0K
dmi.product.name: dynabook Tab S80/B
dmi.product.sku: PDW0KN
dmi.product.version: PS80BSGK7L7ADJX
dmi.sys.vendor: TOSHIBA
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1958911/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
