apport information ** Tags added: apport-collected kinetic uec-images
** Description changed: QEMU 7.0 supports KVM on RISC-V. Package u-boot-qemu supplies /usr/lib/u-boot/qemu-riscv64_smode/uboot.elf. That binary cannot be used to boot via qemu-system-riscv64 -kvm. File u-boot produced by qemu-riscv64_smode_defconfig with CONFIG_MTD_NOR_FLASH=n CONFIG_CMD_NET=n can be used to start U-Boot with qemu-system-riscv64 -kvm. But any virtio access leads to a crash leaving QEMU unresponsive. Cf. https://lists.denx.de/pipermail/u-boot/2022-July/487893.html + --- + ProblemType: Bug + AlsaDevices: + total 0 + crw-rw---- 1 root audio 116, 1 Jul 10 19:58 seq + crw-rw---- 1 root audio 116, 33 Jul 10 19:58 timer + AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' + ApportVersion: 2.22.0-0ubuntu4 + Architecture: riscv64 + ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' + AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: + CRDA: N/A + CasperMD5CheckResult: unknown + DistroRelease: Ubuntu 22.10 + IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' + Lspci-vt: + -[0000:00]-+-00.0 Red Hat, Inc. QEMU PCIe Host bridge + +-01.0 Red Hat, Inc. QEMU XHCI Host Controller + +-02.0 Red Hat, Inc. Virtio block device + \-03.0 Red Hat, Inc. Virtio block device + Lsusb: + Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub + Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd QEMU USB Keyboard + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Lsusb-t: + /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M + /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M + |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 480M + Package: linux-starfive-5.17 (not installed) + PciMultimedia: + + ProcCpuinfoMinimal: + processor : 7 + hart : 7 + isa : rv64imafdcsuh + mmu : sv48 + ProcFB: + + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.17.0-1003-starfive root=UUID=504657a8-56e8-431b-9c85-65c5737ccf80 ro default_hugepagesz=2M hugepagesz=2M hugepages=2048 earlycon efi=debug + ProcVersionSignature: Ubuntu 5.17.0-1003.4-starfive 5.17.9 + RelatedPackageVersions: + linux-restricted-modules-5.17.0-1003-starfive N/A + linux-backports-modules-5.17.0-1003-starfive N/A + linux-firmware 20220621.git7b71b75b-0ubuntu1 + RfKill: Error: [Errno 2] No such file or directory: 'rfkill' + Tags: kinetic uec-images + Uname: Linux 5.17.0-1003-starfive riscv64 + UnreportableReason: This report is about a package that is not installed. + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: N/A + _MarkForUpload: False + acpidump: ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1980594/+attachment/5602239/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-starfive-5.17 in Ubuntu. https://bugs.launchpad.net/bugs/1980594 Title: /usr/lib/u-boot/qemu-riscv64_smode/uboot.elf cannot be booted with KVM Status in linux package in Ubuntu: Confirmed Status in linux-starfive-5.17 package in Ubuntu: Confirmed Bug description: QEMU 7.0 supports KVM on RISC-V. Package u-boot-qemu supplies /usr/lib/u-boot/qemu-riscv64_smode/uboot.elf. That binary cannot be used to boot via qemu-system-riscv64 -kvm. File u-boot produced by qemu-riscv64_smode_defconfig with CONFIG_MTD_NOR_FLASH=n CONFIG_CMD_NET=n can be used to start U-Boot with qemu-system-riscv64 -kvm. But any virtio access leads to a crash leaving QEMU unresponsive. Cf. https://lists.denx.de/pipermail/u-boot/2022-July/487893.html --- ProblemType: Bug AlsaDevices: total 0 crw-rw---- 1 root audio 116, 1 Jul 10 19:58 seq crw-rw---- 1 root audio 116, 33 Jul 10 19:58 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.22.0-0ubuntu4 Architecture: riscv64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: N/A CasperMD5CheckResult: unknown DistroRelease: Ubuntu 22.10 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci-vt: -[0000:00]-+-00.0 Red Hat, Inc. QEMU PCIe Host bridge +-01.0 Red Hat, Inc. QEMU XHCI Host Controller +-02.0 Red Hat, Inc. Virtio block device \-03.0 Red Hat, Inc. Virtio block device Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd QEMU USB Keyboard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Lsusb-t: /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 480M Package: linux-starfive-5.17 (not installed) PciMultimedia: ProcCpuinfoMinimal: processor : 7 hart : 7 isa : rv64imafdcsuh mmu : sv48 ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.17.0-1003-starfive root=UUID=504657a8-56e8-431b-9c85-65c5737ccf80 ro default_hugepagesz=2M hugepagesz=2M hugepages=2048 earlycon efi=debug ProcVersionSignature: Ubuntu 5.17.0-1003.4-starfive 5.17.9 RelatedPackageVersions: linux-restricted-modules-5.17.0-1003-starfive N/A linux-backports-modules-5.17.0-1003-starfive N/A linux-firmware 20220621.git7b71b75b-0ubuntu1 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' Tags: kinetic uec-images Uname: Linux 5.17.0-1003-starfive riscv64 UnreportableReason: This report is about a package that is not installed. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: False acpidump: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1980594/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
