** Changed in: thermald (Ubuntu Jammy)
Status: New => In Progress
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to thermald in Ubuntu.
https://bugs.launchpad.net/bugs/1995606
Title:
Upgrade thermald to 2.5.1 for Jammy (22.04)
Status in OEM Priority Project:
New
Status in thermald package in Ubuntu:
New
Status in thermald source package in Jammy:
In Progress
Bug description:
[Justification]
The purpose of this bug is that prevent the regression in the future.
The automatic test scripts are better for the future SRU and is still on the
planning.
[Test case]
For these CPU series, RPL/ADL/TGL/CML/CFL/KBL, the following tests will be
run on machines in the CI lab:
1. Run stress-ng, and observe the temperature/frequency/power with s-tui
- Temperatures should stay just below trip values
- Power/performance profiles should stay roughly the same between old
thermald and new thermald (unless specifically expected eg: to fix
premature/insufficient throttling)
2. check if thermald could read rules from /dev/acpi_thermal_rel and generate
the xml file on /etc/thermald/ correctly.
- this depends on if acpi_thermal_rel exist.
- if the machine suppots acpi_thermal_rel, the "thermal-conf.xml.auto"
could be landed in etc/thermald/.
- if not, the user-defined xml could be created, then jump to (3).
- run thermald with --loglevel=debug, and compare the log with xml.auto
file. check if the configuration could be parsed correctly.
3. check if theramd-conf.xml and thermal-cpu-cdev-order.xml can be loaded
correctly.
- run thermald with --loglevel=debug, and compare the log with xml files.
- if parsed correctly, the configurations from XML files would appear in
the log.
4. Run unit tests, the scripts are under test folder, using emul_temp to
simulate the High temperatue and check thermald would throttle CPU through the
related cooling device.
- rapl.sh
- intel_pstate.sh
- powerclamp.sh
- processor.sh
5. check if the power/frequency would be throttled once the temperature reach
the trip-points of thermal zone.
6. check if system would be throttled even the temperature is under the
trip-points.
[ Where problems could occur ]
since the PL1 min/max is introduced, there may have some cases that don't
check the minimum of PL1 then make PL1 to smaller and smaller and throttle the
CPU.
this may cause machines run like the old behavior that doesn't have PL1
min/max.
To manage notifications about this bug go to:
https://bugs.launchpad.net/oem-priority/+bug/1995606/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
