Public bug reported:
SRU Justification
Impact:
The upstream process for stable tree updates is quite similar
in scope to the Ubuntu SRU process, e.g., each patch has to
demonstrably fix a bug, and each patch is vetted by upstream
by originating either directly from a mainline/stable Linux tree or
a minimally backported form of that patch. The following upstream
stable patches should be included in the Ubuntu kernel:
v6.5.2 upstream stable release
from git://git.kernel.org/
Linux 6.5.2
pinctrl: amd: Don't show `Invalid config param` errors
usb: typec: tcpci: clear the fault status bit
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
tracing: Zero the pipe cpumask on alloc to avoid spurious -EBUSY
dt-bindings: sc16is7xx: Add property to change GPIO function
tcpm: Avoid soft reset when partner does not support get_status
fsi: master-ast-cf: Add MODULE_FIRMWARE macro
firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe
serial: sc16is7xx: fix bug when first setting GPIO direction
serial: sc16is7xx: fix broken port 0 uart init
serial: qcom-geni: fix opp vote on shutdown
wifi: ath11k: Cleanup mac80211 references on failure during tx_complete
wifi: ath11k: Don't drop tx_status when peer cannot be found
wifi: rtw88: usb: kill and free rx urbs on probe failure
wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU
wifi: mt76: mt7921: do not support one stream on secondary antenna only
staging: rtl8712: fix race condition
HID: wacom: remove the battery when the EKR is off
usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0
usb: dwc3: meson-g12a: do post init to fix broken usb after resumption
ALSA: usb-audio: Fix init call orders for UAC1
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index
mmc: au1xmmc: force non-modular build and remove symbol_get usage
ARM: pxa: remove use of symbol_get()
ksmbd: reduce descriptor size if remaining bytes is less than request size
ksmbd: replace one-element array with flex-array member in struct smb2_ea_info
ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob()
ksmbd: fix wrong DataOffset validation of create context
erofs: ensure that the post-EOF tails are all zeroed
drm/amdgpu: correct vmhub index in GMC v10/11
** Affects: linux (Ubuntu)
Importance: Undecided
Status: Confirmed
** Affects: linux (Ubuntu Mantic)
Importance: Undecided
Status: Confirmed
** Tags: kernel-stable-tracking-bug
** Changed in: linux (Ubuntu)
Status: New => Confirmed
** Tags added: kernel-stable-tracking-bug
** Also affects: linux (Ubuntu Mantic)
Importance: Undecided
Status: Confirmed
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/2035583
Title:
Mantic update: v6.5.2 upstream stable release
Status in linux package in Ubuntu:
Confirmed
Status in linux source package in Mantic:
Confirmed
Bug description:
SRU Justification
Impact:
The upstream process for stable tree updates is quite similar
in scope to the Ubuntu SRU process, e.g., each patch has to
demonstrably fix a bug, and each patch is vetted by upstream
by originating either directly from a mainline/stable Linux tree or
a minimally backported form of that patch. The following upstream
stable patches should be included in the Ubuntu kernel:
v6.5.2 upstream stable release
from git://git.kernel.org/
Linux 6.5.2
pinctrl: amd: Don't show `Invalid config param` errors
usb: typec: tcpci: clear the fault status bit
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
tracing: Zero the pipe cpumask on alloc to avoid spurious -EBUSY
dt-bindings: sc16is7xx: Add property to change GPIO function
tcpm: Avoid soft reset when partner does not support get_status
fsi: master-ast-cf: Add MODULE_FIRMWARE macro
firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe
serial: sc16is7xx: fix bug when first setting GPIO direction
serial: sc16is7xx: fix broken port 0 uart init
serial: qcom-geni: fix opp vote on shutdown
wifi: ath11k: Cleanup mac80211 references on failure during tx_complete
wifi: ath11k: Don't drop tx_status when peer cannot be found
wifi: rtw88: usb: kill and free rx urbs on probe failure
wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU
wifi: mt76: mt7921: do not support one stream on secondary antenna only
staging: rtl8712: fix race condition
HID: wacom: remove the battery when the EKR is off
usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0
usb: dwc3: meson-g12a: do post init to fix broken usb after resumption
ALSA: usb-audio: Fix init call orders for UAC1
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index
mmc: au1xmmc: force non-modular build and remove symbol_get usage
ARM: pxa: remove use of symbol_get()
ksmbd: reduce descriptor size if remaining bytes is less than request size
ksmbd: replace one-element array with flex-array member in struct smb2_ea_info
ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob()
ksmbd: fix wrong DataOffset validation of create context
erofs: ensure that the post-EOF tails are all zeroed
drm/amdgpu: correct vmhub index in GMC v10/11
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2035583/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
