Below was performed to verify the -proposed package. 1. Reproduce the problem: used the same environment as in description - downgrade the package to 1.2.6.3-1ubuntu1.8 - remove file: /var/lib/alsa/asound.state - power off the machine (not reboot) and power up again - verify no sound (play youtube)
2. Install jammy-proposed 1.2.6.3-1ubuntu1.9 and verify the same test cases as in description: - sound can play - $ sudo alsactl init - does not throw any errors - $ amixer contents values=on 3. Power cycle and check if any regressions: - power off and on again - sound can play - adjust sound lower/higher works - $ sudo alsactl init - does not throw any errors Same steps were performed for mantic-proposed 1.2.9-1ubuntu3.1 and lunar-proposed 1.2.6.3-1ubuntu9.3. ** Tags removed: verification-needed-jammy ** Tags added: verification-done-jammy ** Tags removed: verification-needed-lunar verification-needed-mantic ** Tags added: verification-done-lunar verification-done-mantic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-ucm-conf in Ubuntu. https://bugs.launchpad.net/bugs/2042902 Title: ucm2: soundwire: add rt713 SDCA device Status in OEM Priority Project: In Progress Status in alsa-ucm-conf package in Ubuntu: Fix Released Status in alsa-ucm-conf source package in Jammy: Fix Committed Status in alsa-ucm-conf source package in Lunar: Fix Committed Status in alsa-ucm-conf source package in Mantic: Fix Committed Status in alsa-ucm-conf source package in Noble: Fix Released Bug description: [ Impact ] Affects devices with SoundWire-Audio Codec-ALC713 and SoundWire-Jack Codec-ALC713. Without correct configurations in userspace above codecs cannot be used. Thus in Settings > Sound > Output test doesn't produce sounds and Input device is greyed out. [ Fix ] Adding rt713 config files in ucm2 will allow to utilize those codecs. Upstream commit added support: https://github.com/alsa-project/alsa-ucm-conf/pull/363 [ Test Plan ] Device with the soundwire card $ cat /proc/asound/cards 0 [sofsoundwire ]: sof-soundwire - sof-soundwire Intel Soundwire SOF Before fix: 1. $ alsactl init alsa-lib utils.c:364:(uc_mgr_config_load_into) could not open configuration file /usr/share/alsa/ucm2/sof-soundwire/rt713.conf alsa-lib parser.c:77:(uc_mgr_config_load_file) error: failed to open file /usr/share/alsa/ucm2/sof-soundwire/rt713.conf: -2 alsa-lib main.c:1412:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "sof-soundwire" "Intel Meteorlake HDMI" "HDA:8086281d,80860101,00100000 cfg-spk:2 cfg-amp:2 hs:rt713-sdca spk:rt1316 mic:rt713-dmic" "" "" Hardware is initialized using a generic method 2. $ amixer contents ... numid=24,iface=MIXER,name='Headphone Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off ... numid=33,iface=MIXER,name='IEC958 Playback Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off After fix: after adding patch files 1. $ alsactl init alsa-lib main.c:779:(execute_sequence) exec '/bin/rm -rf /var/lib/alsa/card0.conf.d' failed (exit code 1) (note: assuming that failed to remove the empty directory is not a critical problem) 2. $ amixer contents ... numid=24,iface=MIXER,name='Headphone Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on ... numid=33,iface=MIXER,name='IEC958 Playback Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on [Where problems could occur] * This change adds new hardware support. * The change only adds new hardware support, it will not affect other codec device. To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/2042902/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp