Hello You-Sheng, or anyone else affected, Accepted linux-firmware into jammy-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/linux- firmware/20220329.git681281e4-0ubuntu3.29 in a few hours, and then in the -proposed repository.
Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- jammy to verification-done-jammy. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-jammy. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/2048977 Title: WCN6856 Wi-FI Unavailable and no function during suspend stress Status in HWE Next: New Status in linux-firmware package in Ubuntu: Fix Released Status in linux-firmware source package in Jammy: Fix Committed Status in linux-firmware source package in Lunar: Won't Fix Status in linux-firmware source package in Mantic: Fix Committed Status in linux-firmware source package in Noble: Fix Released Bug description: [SRU Justification] BugLink: https://bugs.launchpad.net/bugs/2048977 [Impact] Due to a known silicon limitation, the following sequence is needed while initialing the PCIE device on a certain devices with ASMedia chipset involved: 'hot reset' assert 2nd PCIe reset' assert Asmedia 'hot reset' deassert PT21 GPIO13 2nd PCIe reset' deassert. In certain caes, the WIFI link training failed while system resumes from suspend. [Fix] Upstream commits: 5217b76bed90 ("ath11k: WCN6855 hw2.0: update to WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37") 324cc56975d7 ("ath11k: WCN6855 hw2.0: update board-2.bin") And Jammy takes an additional commit d1dc30480f ("ath11k: WCN6855 hw2.0: update board-2.bin"), 17509e53b97b ("ath11k: WCN6855 hw2.0: update to WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.36") to forfill git history dependency. And while we pulled a firmware fix from github.com/kvalo/ath11k-firmware in bug 2042534, it fails to clean cherry-pick of commit 17509e53b97b. Since Noble has not yet accept the PR for bug 2042534, it has no such problem at this moment. [Test Case] This can be reproduced with suspend/resume stress test. $ checkbox-cli run com.canonical.certification::stress- suspend-30-cycles-with-reboots-automated [Where problems could occur] Opaque firmware update. No known issue found yet after the update. [Other Info] This affects all series with WCN6855/WCN6856 support, Noble/Mantic and Jammy for oem-6.5 included. ========== original bug report ========== Due to a known silicon limitation, the following sequence is needed while initialing the PCIE device on a certain devices with ASMedia chipset involved: 1. 'hot reset' assert 2. 2nd PCIe reset' assert 3. Asmedia 'hot reset' deassert 4. PT21 GPIO13 2nd PCIe reset' deassert. In certain caes, the WIFI link training failed while system resumes from suspend. This can be reproduced with suspend/resume stress test. $ checkbox-cli run com.canonical.certification::stress- suspend-30-cycles-with-reboots-automated The proposed fixes are: * https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=17509e53b97baaefeb287b98d3358da8a6e1c199 - This FW include this LP ticket issue fix * https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=324cc56975d7b5a375259a49667c24f2f5a4c8fe - The FW is to support new China regulatory support. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/2048977/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
