Verification successful: https://pastebin.canonical.com/p/R3t5MZk8dx/ updatins tags
** Tags removed: verification-needed-noble-linux-hwe-6.14 ** Tags added: verification-done-noble-linux-hwe-6.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2116061 Title: [UBUNTU 25.04] lszcrypt output shows no cards because ap module has to be loaded manually Status in Ubuntu on IBM z Systems: Fix Committed Status in linux package in Ubuntu: Fix Committed Status in linux-hwe-6.14 package in Ubuntu: Invalid Status in linux source package in Noble: Invalid Status in linux-hwe-6.14 source package in Noble: Fix Committed Status in linux source package in Plucky: Fix Committed Status in linux-hwe-6.14 source package in Plucky: Invalid Status in linux source package in Questing: Fix Committed Status in linux-hwe-6.14 source package in Questing: Invalid Bug description: [ Impact ] s390: Build ap driver into the kernel The adjunct processor (AP) bus driver is currently configured as a loadable module. This leads to a bug on systems that rely on early access to hardware cryptographic resources. In particular, encrypted root filesystems using secure keys may fail to boot if the AP module is not available at boot. Fix the issue by building the AP driver into the kernel. [ Fix ] The issue can be fixed by building the AP driver into the kernel: CONFIG_AP=y [ Test Plan ] Run the command lszcrypt. This should display the current state of crypto hardware even without explicitly load the ap module. [ Regression Potential ] The now built-in driver is small and unlikely to cause problems unless the target environment is extremely memory-constrained or the kernel image size approaches bootloader limits (rare on IBM Z mainframes). --- == Comment: #0 - Grgo Mariani <grgo.mari...@ibm.com> - 2025-06-23 00:28:40 == ---Problem Description--- Previously kernel built-in module ap now has to be loaded manually. This means that lszcrypt output will show no cards and pkey functionality cannot be used before the module is loaded. Terminal output shows: $ lszcrypt -V lszcrypt: Crypto device driver not available. $ modprobe ap $ lszcrypt -V CARD.DOM TYPE MODE STATUS REQUESTS PENDING HWTYPE QDEPTH FUNCTIONS DRIVER -------------------------------------------------------------------------------------------- 00 CEX7A Accelerator online 0 0 13 08 -MC-A-N-F- cex4card 00.0017 CEX7A Accelerator online 0 0 13 08 -MC-A-N-F- cex4queue $ modinfo ap filename: /lib/modules/6.14.0-22-generic/kernel/drivers/s390/crypto/ap.ko.zst license: GPL description: Adjunct Processor Bus driver author: IBM Corporation srcversion: 99B7B128E77089951FE3C3A depends: intree: Y name: ap vermagic: 6.14.0-22-generic SMP mod_unload modversions sig_id: PKCS#7 signer: Build time autogenerated kernel key ---Additional Hardware Info--- CEX cards attached. ---Debugger--- A debugger is not configured ---Steps to Reproduce--- Install the distro (ubuntu 25.04) and run the following commands: $ lszcrypt $ modinfo ap $ modprobe ap $ lszcrypt ---uname output--- Linux SYSTEM 6.14.0-22-generic #22-Ubuntu SMP Wed May 21 13:32:46 UTC 2025 s390x s390x s390x GNU/Linux Contact Information = grgo.mari...@ibm.com christian.r...@de.ibm.com Machine Type = Manufacturer: IBM Type: 8561 Model: 701 T01 System Dump Info: The system is not configured to capture a system dump. Stack trace output: no Oops output: no == Comment: #2 - Holger Dengler <holger.deng...@ibm.com> - 2025-06-23 02:25:11 == The architecture default-configurations all configure ap as built-in. If a distribution decides to do it different, they should be aware of such regression cases. In my opinion, it is the responsibility of the distro to fix this. Either by change the configuration for ap or by loading the ap module explicitly. There is also another aspect: if customres use encrypted disks with paes, it might also be necessary to include the ap module in the initramfs and load it explicitly there as well. Otherwise it will be hard to decrypt the disk, if secure keys are used. == Comment: #3 - Grgo Mariani <grgo.mari...@ibm.com> - 2025-06-23 03:30:40 == Good catch, the ap module is not listed in the initrd $ lsinitramfs /boot/initrd.img-$(uname -r) | grep ap usr/lib/modules/6.14.0-22-generic/kernel/drivers/base/regmap usr/lib/modules/6.14.0-22-generic/kernel/drivers/base/regmap/regmap-mmio.ko.zst usr/lib/modules/6.14.0-22-generic/kernel/drivers/md/dm-snapshot.ko.zst etc/console-setup/cached_UTF-8_del.kmap.gz usr/bin/mkswap usr/bin/loadkmap usr/bin/dumpkmap usr/lib/multipath/libprioontap.so usr/lib/s390x-linux-gnu/libcap-ng.so.0 usr/lib/s390x-linux-gnu/libcap-ng.so.0.0.0 usr/lib/s390x-linux-gnu/libcap.so.2 usr/lib/s390x-linux-gnu/libcap.so.2.73 usr/lib/s390x-linux-gnu/libdevmapper-event.so.1.02.1 usr/lib/s390x-linux-gnu/libdevmapper.so.1.02.1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/2116061/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
