Antoine, could you please test the latest upstream kernel available (the one all the way at the top, and not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER
where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-3.15-rc8 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags removed: bios-outdated-a16 ** Tags added: latest-bios-a15 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1251580 Title: Display is heavily distorted after kernel upgrades Status in “linux” package in Ubuntu: Incomplete Bug description: The bug is present already at boot (even from a USB stick boot without installing) in all Ubuntu (and variants) relying on Linux kernels 3.10 to 3.12 (-> still present in 3.13). Because it's so easy to boot via USB, I tried it on 7 computers (all of them Dell Optiplex 9010). The upshot is that old distros boot correctly, with working displays. The new 13.10 distros doesn't work (i.e. the display is distorted) on 3 computers. On my computer (which is one of the 3 malfunctioning), recovery mode also always display correctly. Playing around with xrandr and the xorg.conf turoned out to be of no avail. I tried changing the Linux kernels (after indications from this Ubuntu forums thread: http://ubuntuforums.org/showthread.php?t=2186873 ). It turns out that kernels of version <= 3.9 are OK. Kernels >= 3.10.19 are not OK. I'm willing to bisect in the 3.10.x range if deemed of interest. I kept the lshw, lspci, xdpyinfo, ddcprobe and Xorg.0.log of all these 7 boots from USB stick. I put all those log files in a zip file availiable at http://dfiles.eu/files/njfpo8b4k Here are the main differences I found in those files (except the Xorg.0.log which are not so handy to compare as the beginning of lines are always different). I guess that the most telling is the following line from ddcprobe. For non-correctly-displaying computers: dtiming: 1920x1080@68 For correctly-displaying computers: dtiming: 1920x1080@60 For the record, there is no other ctiming or dtiming line in the output of ddcprobe. The configuration are otherwise strikingly similar. The other differences which seemed of significance (i.e. not mentionning hard drives partitions and serial numbers) is that uncorrectly working computers have the following extra line in lspci 00:16.3 Serial controller: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller (rev 04) Correspondingly, the lshw of these computers have the following extra section: *-communication:1 description: Serial controller product: 7 Series/C210 Series Chipset Family KT Controller vendor: Intel Corporation physical id: 16.3 bus info: pci@0000:00:16.3 version: 04 width: 32 bits clock: 66MHz capabilities: pm msi 16550 bus_master cap_list configuration: driver=serial latency=0 resources: irq:19 ioport:f0e0(size=8) memory:f7d3a000-f7d3afff Lastly, in the *-pci section. Also, the *-memory *-bank:n (for n an integer) are not of the same vendor (Samsung or Nanya technologies for correctly-displaying computers and Hynix/Hyundai for non-correctly- displaying ones). The visual distortion is roughly as follows: every line gets horizontally enlarged by a factor t. This factor varies with time and with the height of the line to make nice sine curves out of straight vertical lines. Actually there is a phase difference between even and odd lines. The leftmost part of the screen remains legible as the distortion effect is smaller there but the rightmost part is impossible to read. A straight vertical line looks like sine wave, the time frequency of this wave varies with time, the amplitude is always increasing linearly as one moves to the right of the screen. See also the first post in http://ubuntuforums.org/showthread.php?t=2186040 Do not hesitate to contact me if further testing is of interest. Cheers, X. --- ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: ubuntu 2324 F.... pulseaudio CasperVersion: 1.340 CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 IwConfig: eth0 no wireless extensions. lo no wireless extensions. LiveMediaBuild: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=<set> LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 RelatedPackageVersions: linux-restricted-modules-3.13.0-24-generic N/A linux-backports-modules-3.13.0-24-generic N/A linux-firmware 1.127 RfKill: Tags: trusty Uname: Linux 3.13.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 09/19/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A07 dmi.board.name: 0CRWCR dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 13 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA07:bd09/19/2012:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0CRWCR:rvrA01:cvnDellInc.:ct13:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1251580/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : [email protected] Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
